close shape报错Unable to create closed shape(s) from selected segments using ...

bb2481120

在整合板框的时候报错：Unable to create closed shape(s) from selected segments using current gap settings.也不能close shape。
解决方法：
- Q2 k" I- _4 z" M3 n1.将导入的dxf线宽改为0.1mm。
7 W, Q9 i$ ~5 l3 X/ `2.用cross copy 把线改为shape，并merge shanpe。
3.z-copy这个shape。

yangjinxing521

也行啊