求助!急!!!关于DRC报错问题

kris_2008

请教各位高手,我在原理图进行DRC检查时出现如下错误:
ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net DM_ADDR[0..23]:  SCHEMATIC1, 01_FIC8120  (18.88, 0.80)
. M. U2 e7 ~- WERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net DM_ADDR[0..23]:  SCHEMATIC1, 01_FIC8120  (18.88, 0.80)
ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net DM_ADDR[0..23]:  SCHEMATIC1, 01_FIC8120  (18.88, 0.80)
ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net DM_ADDR[0..23]:  SCHEMATIC1, 01_FIC8120  (18.88, 0.80)
ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net MAC_MDC:  SCHEMATIC1, 03_Mac_Phy  (2.98, 4.45)
ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net MAC_RXD[0..3]:  SCHEMATIC1, 03_Mac_Phy  (2.98, 2.35)
0 h/ E/ u* P" o4 [ERROR [DRC0004]   Possible pin type conflict U7,RXD1 Output Connected to Input Port:  SCHEMATIC1, 03_Mac_Phy  (6.48, 3.75)
+ f4 V8 k$ J" N! c3 Z9 e4 T% vERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net MAC_COL:  SCHEMATIC1, 03_Mac_Phy  (2.98, 3.55)
ERROR [DRC0004]   Possible pin type conflict U7,COL Output Connected to Input Port:  SCHEMATIC1, 03_Mac_Phy  (6.48, 4.15)
ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net MAC_RX_DV:  SCHEMATIC1, 03_Mac_Phy  (2.98, 2.95)
* s' n+ n/ i  V; q5 A: ?ERROR [DRC0004]   Possible pin type conflict U7,RX_DV Output Connected to Input Port:  SCHEMATIC1, 03_Mac_Phy  (6.48, 3.55)
ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net MAC_RX_ER:  SCHEMATIC1, 03_Mac_Phy  (2.98, 3.15)
: H! y8 o3 i; d& BERROR [DRC0004]   Possible pin type conflict U7,RX_ER/FIBMOD Output Connected to Input Port:  SCHEMATIC1, 03_Mac_Phy  (6.48, 4.35)
: i* u0 W, y# x) _ERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net MAC_RXD[0..3]:  SCHEMATIC1, 03_Mac_Phy  (2.98, 2.35)
* B; m7 T' U& P: V4 q8 M$ m7 Y& V- `
这些错误要怎么改?不知道是不是平坦式时端口连接有问题啊!急啊!

numbdemon

原帖由 kris_2008 于 2008-7-3 17:09 发表
请教各位高手,我在原理图进行DRC检查时出现如下错误:
; n" t$ ]" Q7 v: m- QERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net DM_ADDR[0..23]:  SCHEMATIC1, 01_FIC8120  (18.88, 0.80)
ERROR [D ...

  G/ w0 z4 N$ W. }  k/ g+ r如果是平坦式原理图的话 都改成offpage connector看看

datao1225

原帖由 kris_2008 于 2008-7-3 17:09 发表
7 p6 B/ c1 H$ Z) A请教各位高手,我在原理图进行DRC检查时出现如下错误:
  \$ h' O5 `1 J4 J4 o$ hERROR [DRC0003]   Port has a type which is inconsistent with other ports on the net DM_ADDR[0..23]:  SCHEMATIC1, 01_FIC8120  (18.88, 0.80)
ERROR [D ...

I think it's related to 'Port Type'.
8 o0 `7 f) ?. l" a( q# aTry it pls.
.

可可爱

3# datao1225