CP7 Series servo pack zero setting

Demyar

CP7 Series servo pack zero setting

, B& @) S9 U+ }3 ~6 i/ }6 |
Servo Pack Zero Setting Operation
Servo Pack zero setting is peRFormed in two stages (Auto and Manual). Follow the procedure
below carefully. This procedure is done to set the zero stability point of the servo pack.
+ P; L" G6 `: [  `2 r1 sNote: Carry out the adjustment for each axis in the same manner.
1 M- z. P( A$ D! H- X( F9 y5 _Auto Zero Setting
1. Press the M/C emergency button to turn the servo power OFF. Auto zeroing must be done with the E-Stop pressed.
2. Press [MODE/SET] (on the Servo Pack control panel) to display <Fn000> Press the[ ] key 9 times to Display <Fn009> Press [DATA/SHIFT] for more than 1 second.
Display <rEF_0> Press [Mode/Set] for more than 1 second. <done> will display for 1 second and return to <rEF_0> Press [DATA/SHIFT] for more than 1 second. The display will return to <Fn009> Press [MODE/SET] 3 times to display < bb>. The procedure for auto zero setting is now complete. (Note: Carry out the adjustment for each axis in the same manner.)



9 t3 C, V, f" x* k

游客，如果您要查看本帖隐藏内容请回复

( x3 N9 B9 y  @. Z4 D2 {
8 N$ `' V; E3 `

BUFSFER

有没有中文的？