哪位高手帮我看看怎么回事，覆铜后出现这样的错误？？？？？

ctw3 · 发表于 2010-7-15 09:40

EDA365欢迎您登录！

您需要登录才可以下载或查看，没有帐号？注册

x

THERMAL RELIEF ERRORS REPORT -- max6.pcb -- Thu Jul 15 09:33:28 2010

   Drilled pads with                   Nondrilled pads with
less than 50% thermal extensions    less than 25% thermal extensions
Report of Violating Thermal Spokes Remover.
On Top:
                                    IC3.3 (2012.7, 1408.9) # = 0
                                    IC3.5 (2012.7, 1369.5) # = 0
                                    IC3.7 (2012.7, 1330.2) # = 0
                                    IC3.11  (2012.7, 1251.4) # = 0
                                    IC3.17  (2150.5, 1172.7) # = 0
                                    IC3.22  (2248.9, 1172.7) # = 0
                                    IC3.26  (2347.3, 1251.4) # = 0
                                    IC3.28  (2347.3, 1290.8) # = 0
                                    IC3.35  (2347.3, 1428.6) # = 0
                                    IC3.39  (2248.9, 1507.3) # = 0
                                    IC3.42  (2189.8, 1507.3) # = 0
                                    IC7.22  (1997.5, 3648.5) # = 0
                                    IC7.53  (2602.5, 3460.1) # = 0
                                    IC7.63  (2602.5, 3774.1) # = 0
                                    IC1.14  (1572.5, 4562.75) # = 0
                                    IC1.29  (1907.5, 4625.75) # = 0
                                    IC1.31  (1907.5, 4688.75) # = 0
                                    SP1.2 (927.5, 775) # = 0
                                    SP1.5 (1052.5, 775) # = 0
Total Drilled pads: 0             Total Nondrilled pads: 19
已经按网上说的修改了这里“thermals”

zhangtao2 · 发表于 2010-7-15 10:41

不保密把图发上来给你看看啊

haplives · 发表于 2010-7-15 13:47

这些地方没铺上铜

sikixu · 发表于 2010-7-15 20:14

你可能设置了花孔，致使有些地方无法普通，你可以把一些花孔去掉，或者强行走线的方式连通。

dragonou · 发表于 2010-7-15 21:03

应该不影响，设计验证通过就好了

帐号		自动登录	找回密码
密码			注册

哪位高手帮我看看怎么回事，覆铜后出现这样的错误？？？？？

EDA365欢迎您登录！

浏览过的版块

推荐内容 /1