求助：DM8168使用SPI启动出现ERROR: can't get kernel image

qpggup

根据附件中《Linux系统固化方法》将u-boot和uImage固化到SPI flash中，并且在uboot启动时设置完成环境变量。
* r: E1 e4 E& Y5 e  将DM8168开发板拨码开关设置成SPI启动。
, v6 v+ N# V$ O5 C/ |; S打印信息如下：
OMAP SD/MMC: 0
! p% D- }# C) nCard did not respond to voltage select!
2 a0 O" V5 ^$ T5 H4 i' u# L$ E+ @$ V** Can't read from device 0 **
1 T: I3 X. {# p0 Q

+ W% P+ }7 C, S3 V** Unable to use mmc 0:1 for fatload **
** Can't read from device 0 **


: \3 Z8 J* Z) `- v** Unable to use mmc 0:1 for fatload **
FaiLED to initialize SPI flash at 0:0
Booting from network ...
*** ERROR: `serverip' not set
Wrong Image Format for bootm command
$ _5 d/ g0 x& I5 R1 ZERROR: can't get kernel image!
0 _3 |5 l0 g3 i
# }( k# `* I& R+ D) I0 o
请教一下大神，如何解决。
8 z' W, q+ ]9 R  _2 A. f+ M

NingW

不太懂哦