|
|
EDA365欢迎您登录！
您需要 登录 才可以下载或查看，没有帐号？注册
x
新焊接的板子出现以下问题，求大神解答，谢谢啦。Error connecting to the target: Error 0x00001200/-1166 Error during: OCS, Target, Lost processor clock. Device may be operating in a low-power mode. Do you want to bring it out of this mode? Sequence ID: 0 Error Code: -1166 Error Class: 0x00001200
. x% y+ q; [1 E* gError connecting to the target: Error 0x00001020/-1166 Error during: Execution, Target, Lost processor clock. Device may be operating in a low-power mode. Do you want to bring it out of this mode? Sequence ID: 67 Error Code: -1166 Error Class: 0x000010207 e& C% Q, Y. U; F) {+ W
Error connecting to the target: Error 0x00000020/-2011 Error during: Execution, TRG_ERR_CMD_DISABLED Error Occured at 0x00000000 Sequence ID: 67 Error Code: -2011 Error Class: 0x00000020" B2 n# K+ \% E* Y
Er |
|
/1 
发表于 2012-2-21 18:36
收藏
淘帖
支持！
反对！