allegro 15.5导入netlist文件出现下面情况，请高手门帮帮忙啊。谢谢啦

jl1256 · 发表于 2011-7-21 13:28

EDA365欢迎您登录！

您需要登录才可以下载或查看，没有帐号？注册

x

cadence Design Systems, Inc. netrev 15.5 Thu Jul 21 12:30:24 2011
(C) Copyright 2002 Cadence Design Systems, Inc.

------ Directives ------

RIPUP_ETCH FALSE;
RIPUP_SYMBOLS ALWAYS;
MISSING SYMBOL AS ERROR FALSE;
SCHEMATIC_DIRECTORY 'E:/allegro_0711';
BOARD_DIRECTORY '';
OLD_BOARD_NAME 'E:/chenjian/unnamed.brd';
NEW_BOARD_NAME 'E:/chenjian/unnamed.brd';

CmdLine: netrev -$ -5 -i E:/allegro_0711 -u -y 1 E:/chenjian/#Taaaaaa01980.tmp

------ Preparing to read pst files ------

Starting to read E:/allegro_0711/pstchip.dat
Finished reading E:/allegro_0711/pstchip.dat (00:00:00.00)
Starting to read E:/allegro_0711/pstxprt.dat
Finished reading E:/allegro_0711/pstxprt.dat (00:00:00.00)
Starting to read E:/allegro_0711/pstxnet.dat
Finished reading E:/allegro_0711/pstxnet.dat (00:00:00.00)

------ Oversights/Warnings/Errors ------

#1 WARNING(304) Device/Symbol check warning detected.

Symbol 'CC0402' for device 'CAP NP_CC0402_DISCRETE_@10PF' not found in PSMPATH or must be "dbdoctor"ed.

#1 ERROR(305) Device/Symbol check error detected.

Unable to load symbol 'LED3MM_2D54_2DP_4D05W' for device 'Y/G LED * 4_2_LED3MM_2D54_2DP_4': Couldn't find padstack: TH45S28D
due to Unable to load Flash symbol TR45C55-15D4.

#2 WARNING(304) Device/Symbol check warning detected.

Symbol 'SOIC_1D27X5D16_16SP_10L' for device 'ADM3202ARU_2_SOIC_1D27X5D16_16S' not found in PSMPATH or must be "dbdoctor"ed.

#3 WARNING(304) Device/Symbol check warning detected.

Symbol 'HEADER5X2_40D' for device 'RS232 4P_0_HEADER5X2_40D_IO_5PX' not found in PSMPATH or must be "dbdoctor"ed.

#4 WARNING(304) Device/Symbol check warning detected.

Symbol 'RJ45FS_1X8DP_KINSUN' for device 'RJ45_0_RJ45FS_1X8DP_KINSUN_IO_8' not found in PSMPATH or must be "dbdoctor"ed.

Note: SECTION property definition created

------ Library Paths ------
MODULEPATH =  .
         C:/Cadence/SPB_15.5/share/local/pcb/modules

PSMPATH =  .
         symbols
         ..
         ../symbols
         C:/Cadence/SPB_15.5/share/local/pcb/symbols
         C:/Cadence/SPB_15.5/share/pcb/pcb_lib/symbols
         C:/Cadence/SPB_15.5/share/pcb/allegrolib/symbols

PADPATH =  .
         symbols
         ..
         ../symbols
         C:/Cadence/SPB_15.5/share/local/pcb/padstacks
         C:/Cadence/SPB_15.5/share/pcb/pcb_lib/symbols
         C:/Cadence/SPB_15.5/share/pcb/allegrolib/symbols

------ Summary Statistics ------

#2 ERROR(102) Run stopped because errors were detected

netrev run on Jul 21 12:30:24 2011
DESIGN NAME : 'RJ45 CONSOLE_0709'
PACKAGING ON Jun 17 2005 00:56:10

COMPILE 'logic'
CHECK_PIN_NAMES OFF
CROSS_REFERENCE OFF
FEEDBACK OFF
INCREMENTAL OFF
INTERFACE_TYPE PHYSICAL
MAX_ERRORS 500
MERGE_MINIMUM 5
NET_NAME_CHARS '#%&()*+-./:=>?@[]^_`|'
NET_NAME_LENGTH 24
OVERSIGHTS ON
REPLACE_CHECK OFF
SINGLE_NODE_NETS ON
SPLIT_MINIMUM 0
SUPPRESS 20
WARNINGS ON

  2 errors detected
No oversight detected
  4 warnings detected

cpu time    0:00:12
elapsed time  0:00:00

jl1256 · 发表于 2011-7-28 16:48

封装库路径也是设置好的，
封装等等都是从原PCB源文件中导出来的，然后在用别人的PCB文件模块就能导入Netlist文件就可以，用自己新建的就是不行，

dxj175 · 发表于 2011-7-23 17:31

#1 ERROR(305) Device/Symbol check error detected.
Unable to load symbol 'LED3MM_2D54_2DP_4D05W' for device 'Y/G LED * 4_2_LED3MM_2D54_2DP_4': Couldn't find padstack: TH45S28D3
----------------------TH45S28D3 ,焊盘没有找到。

zhouqingmin · 发表于 2011-7-23 16:24

重新设置封装库路径

flyingc381 · 发表于 2011-7-23 14:11

找不到封装库

gaoxiuzhang · 发表于 2011-7-23 10:52

我也静待高人指点

jl1256 · 发表于 2011-7-22 17:37

怎么没人帮忙啊~~各位哥哥，姐姐们，大侠们帮帮忙哈。
要不真石沉大海了。。

帐号		自动登录	找回密码
密码			注册

allegro 15.5导入netlist文件出现下面情况，请高手门帮帮忙啊。谢谢啦

EDA365欢迎您登录！

浏览过的版块

推荐内容 /1