Allegro swap pin的问题

maozheng110 · 发表于 2019-1-6 22:59

EDA365欢迎您登录！

您需要登录才可以下载或查看，没有帐号？注册

x

，原理图中用了一个40x2的库,封装为DIP80
PCB设计时为了走线方便连线时忽略了

这部分网表，连上后想通过PCB export Logic网表（4个文件 compView.dat，funcView.dat，netView.dat，pinView.dat）加上原理图的三个网表文件放一起，在原理图tool->Back annotate中 update sch,结果报错，，在修改原理图part里的pingroup为1后还是不行。

maozheng110 · 发表于 2019-1-6 23:00

{ Using PSTWRITER 16.6.0 d001Jan-06-2019 at 22:33:31 }

INFO(ORCAP-36108): Starting the Swp file dumping process ...
Loading netlist files ...
Loading... E:\MYPROJECT\CADENCE\804_A3P\A3P_SX72_MBOARD\PINSWAP/pstchip.dat

Loading... E:\MYPROJECT\CADENCE\804_A3P\A3P_SX72_MBOARD\PINSWAP/pstxprt.dat

Loading... E:\MYPROJECT\CADENCE\804_A3P\A3P_SX72_MBOARD\PINSWAP/pstxnet.dat
packaging the design view...Loading physical design view ...Loading... E:\MYPROJECT\CADENCE\804_A3P\A3P_SX72_MBOARD\PINSWAP/funcview.dat
#549 ERROR(SPCODD-549): No physical part found for COMP_DEVICE_TYPE=CONN SOCKET 40X2_2_DIP80_CONN S, regenerate the netlist to sync with Allegro board.
            ERROR(SPCODD-516): Line Number: 4
#549 ERROR(SPCODD-549): No physical part found for COMP_DEVICE_TYPE=CONN SOCKET 32_5_DIP32_CONN SOC, regenerate the netlist to sync with Allegro board.
            ERROR(SPCODD-516): Line Number: 5
#549 ERROR(SPCODD-549): No physical part found for COMP_DEVICE_TYPE=CONN SOCKET 32_5_DIP32_CONN SOC, regenerate the netlist to sync with Allegro board.
            ERROR(SPCODD-516): Line Number: 6
#549 ERROR(SPCODD-549): No physical part found for COMP_DEVICE_TYPE=CONN RCPT 40X2_1_DIP80_CONN RCP, regenerate the netlist to sync with Allegro board.
            ERROR(SPCODD-516): Line Number: 7
#549 ERROR(SPCODD-549): No physical part found for COMP_DEVICE_TYPE=CONN SOCKET 64X2/SM_2_DIP128_CO, regenerate the netlist to sync with Allegro board.
            ERROR(SPCODD-516): Line Number: 8
#1 ERROR(ORCAP-36027): Unable to read physical netlist data.
#2 ERROR(ORCAP-36025): Aborting Swap file creation... Please correct the above errors and retry.

dzkcool · 发表于 2019-1-7 08:41

反标原理图只需要PCB输出的网表就好了，不用加上原理图的网表文件

maozheng110 · 发表于 2019-1-7 11:52

dzkcool 发表于 2019-1-7 08:41# z* o2 B8 [ _/ T! X3 b2 B
反标原理图只需要PCB输出的网表就好了，不用加上原理图的网表文件

网上的教程好像都要放一起一共7个

dzkcool · 发表于 2019-1-7 13:11

不用啊，只要设置好brd文件即可。

maozheng110 · 发表于 2019-1-7 14:05

dzkcool 发表于 2019-1-7 13:11
: x3 F& p/ c3 i不用啊，只要设置好brd文件即可。

把原理图生成的网表去掉，一样报错，是不是不能用网络标号，只能直接连的线才可以从PCB更新到SCH
{ Using PSTWRITER 16.6.0 d001Jan-07-2019 at 14:02:47 }

INFO(ORCAP-36108): Starting the Swp file dumping process ...
Loading netlist files ...
Loading... E:\MYPROJECT\CADENCE\804_A3P\A3P_SX72_MBOARD\PINSWAP/pstchip.dat

Loading... E:\MYPROJECT\CADENCE\804_A3P\A3P_SX72_MBOARD\PINSWAP/pstxprt.dat

Loading... E:\MYPROJECT\CADENCE\804_A3P\A3P_SX72_MBOARD\PINSWAP/pstxnet.dat
packaging the design view...Loading physical design view ...Loading... E:\MYPROJECT\CADENCE\804_A3P\A3P_SX72_MBOARD\PINSWAP/funcview.dat
#549 ERROR(SPCODD-549): No physical part found for COMP_DEVICE_TYPE=CONN SOCKET 40X2_2_DIP80_CONN S, regenerate the netlist to sync with Allegro board.
            ERROR(SPCODD-516): Line Number: 4
#549 ERROR(SPCODD-549): No physical part found for COMP_DEVICE_TYPE=CONN SOCKET 32_5_DIP32_CONN SOC, regenerate the netlist to sync with Allegro board.
            ERROR(SPCODD-516): Line Number: 5
#549 ERROR(SPCODD-549): No physical part found for COMP_DEVICE_TYPE=CONN SOCKET 32_5_DIP32_CONN SOC, regenerate the netlist to sync with Allegro board.
            ERROR(SPCODD-516): Line Number: 6
#549 ERROR(SPCODD-549): No physical part found for COMP_DEVICE_TYPE=CONN RCPT 40X2_1_DIP80_CONN RCP, regenerate the netlist to sync with Allegro board.
            ERROR(SPCODD-516): Line Number: 7
#549 ERROR(SPCODD-549): No physical part found for COMP_DEVICE_TYPE=CONN SOCKET 64X2/SM_2_DIP128_CO, regenerate the netlist to sync with Allegro board.
            ERROR(SPCODD-516): Line Number: 8
#1 ERROR(ORCAP-36027): Unable to read physical netlist data.
#2 ERROR(ORCAP-36025): Aborting Swap file creation... Please correct the above errors and retry.

dzkcool · 发表于 2019-1-7 14:12

这不是网络标号的问题，是DIP80和DIP32这两个器件没找到，方便的话把文件传上来看看吧。

maozheng110 · 发表于 2019-1-7 14:40

http://bbs.elecfans.com/forum.ph ... pe=1&tid=503846 别人好像有同样的问题

maozheng110 · 发表于 2019-1-7 14:42

dzkcool 发表于 2019-1-7 14:12
' M+ i0 M; ^1 Y' ?: J- g这不是网络标号的问题，是DIP80和DIP32这两个器件没找到，方便的话把文件传上来看看吧。

PinSwap.rar (55.97 KB, 下载次数: 12)

dzkcool · 发表于 2019-1-7 17:15

要把BRD和原理图传上来。

maozheng110 · 发表于 2019-1-7 17:20

dzkcool 发表于 2019-1-7 17:155 I3 {9 p' o9 c w
要把BRD和原理图传上来。

发你了

dzkcool · 发表于 2019-1-7 17:46

有些器件的Vaule有斜杠或者是空格，这些非法字符最好不要用。
是在不行的话，建议你在原理图中改了导入到PCB中去。

何文斌 · 发表于 2019-1-8 23:54

小规模电路这么玩还行大规模这样玩很容易出错建议还是从原理图改好后导过去

xiaoxiaoya · 发表于 2019-4-18 17:01

看看

maozheng110 · 发表于 2019-12-8 10:21

有朋友说封装有封装把locked去掉，没试过

帐号		自动登录	找回密码
密码			注册

Allegro swap pin的问题

EDA365欢迎您登录！

点评

点评

点评

浏览过的版块

推荐内容 /1