本站微信 收藏本站 设为首页
 找回密码
 注册
关于网站域名变更的通知
EDA365电子论坛网»电子社区 › EDA工具&PCB设计 › Cadence Allegro论坛 › 求救，急，急，出光绘文件有错误
12下一页
返回列表 发新帖
查看: 5289|回复: 16
打印 上一主题 下一主题

求救，急，急，出光绘文件有错误

[复制链接]
412287724

该用户从未签到
跳转到指定楼层
1#
发表于 2011-11-1 09:01 | 只看该作者 |只看大图 回帖奖励 |倒序浏览 |阅读模式

EDA365欢迎您登录！

您需要 登录 才可以下载或查看，没有帐号？注册

x
! S0 d4 Y% |7 M. e

! w. }% C- A  M' G; G以下是我得错误表，我只要是把第2层gnd删除就能出，其它层都能正常出，就是assembly层出不了，第2层我挖了几个不规则的洞，请大家帮帮忙，看看是什么错误。& w1 O9 k  |0 f$ F9 R
(------------------------------------------------------------)
4 r% ~( ~* ~  @(                                                            ). c- k7 d) F5 _6 s1 L* c4 W5 o# w. |
(        ARTWORK LOG                                         )1 d0 V5 U8 ^- ^4 e& }- W
(                                                            )2 v  e+ W, E$ @( b* }& e
(        Drawing          : tju_10_31_2011pinban1.mcm        )* [5 K! J$ ]1 B; n3 y  Y( _1 y( ?  x8 X: C
(        Software Version : 15.51p003                        )
9 S0 Z+ P' Y% @(        Date/Time        : Mon Oct 31 16:41:47 2011         )
# i& @/ ~& t1 |5 c(                                                            )2 |' t$ E2 Z6 u) @% x" q( [
(------------------------------------------------------------)8 b2 _  P& [0 @9 A4 q0 h) X! {
' n4 Q. `+ B/ n

6 ?3 D' P4 {5 T  k) J. M" D7 \4 H# z7 ^, Z( l, ^: D
******************************************
( a- E' G5 s- ^  N WARNING: DRC OUT OF DATE on this layout.' K) J$ ~! k* ^. H/ A0 B2 K
******************************************
  }: \, N' q# r  q, h' p: w# v5 Y( C/ ?. b" U. P* ~! }. S
Mon Oct 31 16:41:47 2011

下载资料威望不够？点击查看获取威望的N种方法>>
回复

举报

EDA365微信号及QQ群号！
wangjing

该用户从未签到
推荐
发表于 2011-11-1 14:22 | 只看该作者
412287724 发表于 2011-11-1 11:15
4 f1 I9 U) h# A& K# V( g我没出那个assembly层的，因为有错误就没出，不好意思那个错误表发错了，下面这个是，麻烦您给看看，着急 ...

* f) s5 v7 Q- _应该是啥shape的问题，所有层关掉，只开boundary/art2层，找到你报错的坐标（-15900，-15900）这点，这里有多余的shape，把它删掉试试，注意不要删多了。

点评

xiaolong31624
正解  发表于 2015-10-27 13:54

下载资料威望不够？点击查看获取威望的N种方法>>
回复 支持 1 反对 0

举报

412287724

该用户从未签到
2#
 楼主| 发表于 2011-11-1 09:02 | 只看该作者
以下是我得错误表，我只要是把第2层gnd删除就能出，其它层都能正常出，就是assembly层出不了，第2层我挖了几个不规则的洞，请大家帮帮忙，看看是什么错误。: f; k" c- _2 r3 y$ M9 P9 G; t) L' Z8 g9 ~
(------------------------------------------------------------)/ e+ L$ @! n1 {/ X1 o( O+ l" N
(                                                            )2 H" v" H( Q( L7 E
(        ARTWORK LOG                                         )
3 Q( S8 u- b' @9 P6 O2 S(                                                            )
6 b0 n. a  b" P/ _" c* l. A; o; V(        Drawing          : tju_10_31_2011pinban1.mcm        )' ~7 z$ z0 n4 i! Z5 H# Y& y/ e- h5 R
(        Software Version : 15.51p003                        )3 |9 [: ?! o! G
(        Date/Time        : Mon Oct 31 16:41:47 2011         )
% N- V8 U! X" k: \, n) [(                                                            )
& M7 }) z' p7 i- E(------------------------------------------------------------)* G1 f; O* Q5 y* M
- j! H8 v2 d4 Q0 \

: m3 @0 x: A9 k- ?* k8 A1 F. X5 f, h. b* y) b) h
******************************************3 e- a% i2 }1 ~
WARNING: DRC OUT OF DATE on this layout.
: }6 k: u8 Y5 {! F8 H) ^. `+ a ******************************************
' h& X2 g! Q/ `3 [
' u" I. z- b- M$ Z, }( \% VMon Oct 31 16:41:47 2011                                Page     15 p/ D# E. p' B, A
  }" C; W/ k' ^3 e4 R# W
Photoplot log file
# ^, X1 _' W! x$ U, b6 N5 b0 _5 wResults from parameter file ...
) C& o3 V6 w! E. C6 e3 q( ?) a9 b" Y7 C& n0 }# q! k1 {5 h
DEVICE-TYPE           GERBER_RS274X1 \/ _0 [9 C+ L9 H: z- c* B
OUTPUT-UNITS          MM
6 C6 [8 ~' S8 Z6 D: q) _FILM-SIZE             24000 16000
4 ?4 x  Q  X; A5 ~FORMAT                5.3
9 t; ?6 y$ M0 c0 P5 l5 t( tABORT-ON-ERROR        NO
6 c* f/ B$ f' [" `/ w1 wSCALE                 1
1 [# N" r. q9 O' T7 dSUPPRESS-LEAD-ZEROES  YES5 z; _/ T3 {3 O: Z6 u
SUPPRESS-TRAIL-ZEROES NO
; P! W: {! V* q3 P0 U: ?) d0 ]( r" GSUPPRESS-EQUAL        YES
/ T% @. A0 I! n/ l/ k3 hUNDEF-APT-CONT        NO
( X. ?8 g3 z$ T( e6 n
0 B' g* _' H) o" R( {! e9 _9 k4 j) } WARNING: for raster artwork formats, artwork accuracy must be4 C9 |! ^2 }' p+ D5 f
  at least one place greater than the database accuracy, up
$ E  Y# \: M1 z- Q" ^, C  to the maximum accuracy allowed by the selected output format., z9 Q& S% s# I8 z' o
3 Z$ ?8 o/ K' Z2 \& B! O, a
  Increase the accuracy by increasing the "Decimal Places" in% w0 c8 z) u8 L4 Z
  the FORMAT section of the artwork parameters and then rerun
, h4 c+ a6 K9 H" Z% b% d8 L  artwork.* b0 S/ [# U3 x8 a. Y

5 K: O/ Y# [6 E( }! j) p  The current output is rounding down the data.  Failure to change
6 @5 d$ ~( {1 r; Y5 J9 O6 [  the format may result in inaccurate arc coordinates in the output6 H" w! v; E# i! Y) {# ]5 a. C
  files and possible shape/void plotting failures.  c; P/ _5 u3 L: n0 T% j3 z

5 f$ R, w. P& P
! h% `6 f/ _/ |" e& j================================================================1 R% G5 U7 F5 P/ K7 y
     PROCESSING FILM < L1.art > ...4 j! Y7 O; m3 B8 y( O# N) {
================================================================& R' f6 B: ^' J6 C& b- v# F0 X) d4 w
7 F$ X. R. j) e8 }4 ^/ K
  FILM PARAMETERS :
% M& u8 c0 D; i8 c: Q7 \& v& @  ---------------------------------------------------------. f. [# L  u; q
  Undefined line width                0.00/ a2 T# j/ J( {5 R! ~  V
  Mirror code                         NONE+ h; f4 f* K% |( w; h1 L
  Rotate angle                        NONE% K2 E2 G, R2 [% z, @% `( O' D1 P
  Offset x:                           0.00
+ O4 N! c" L9 Y1 C3 E% c  E  Offset y:                           0.000 M. b1 C2 X% ~2 O) y% b, d
  Plot negative                       NO3 X( [3 @9 {5 p# B
  Suppress unconnected internal pads  NO
% \0 n/ S. z' D. A# J. b/ q. t5 i; M) u+ E0 D  Q
    WARNING: Film contains DRC error(s).$ v! r! g8 m. a4 j/ v" U
    WARNING: 0 width line found at (-1000.00 -372000.00), L3 N( l6 q* X" j9 _, I" ^# R
    WARNING: ... ignored!
- U2 |' b) M+ f* x* Q& ]
5 Z3 E( m* H$ l( R# s    WARNING: Multiple 0 width lines; all will be treated the same as the first.  C  ]& m2 c. g& m. a! Q
    WARNING: ... ignored!
' a6 I" ]  s( X; t7 r2 J! `. e! x7 i; s" V, Q: j& o
    WARNING: rectangle or unfilled shape composed 0 width line found at (50000.00 -424000.00)
7 }  E# T# {8 t2 p4 v    WARNING: ... ignored!. U/ ]6 K9 A2 v& s8 d2 r

; q! d6 z' X1 V+ e& V1 N    WARNING: rectangle or unfilled shape having Multiple 0 width lines; all will be treated the same as the first.
% A7 w! n8 |; |5 V( R/ k4 M    WARNING: ... ignored!% K6 P4 \: u) |9 [/ i6 s
" ~2 g7 g6 |# c9 m2 a- h$ Q
0 f( {9 u  n/ L3 Y9 t

: C: w. I" m) y# x' ]+ N  APERTURES USED:- r' i7 @2 ~4 S3 K' Q# f+ d/ n
  ---------------------------------------------------------7 N" O- f: R! I" }3 R" ?
  TYPE       SIZE/NAME                   ROT   MIRROR MODE
. n4 F* A" t/ j% c/ a  ---------------------------------------------------------" ]% @- K7 e/ p( ^* m3 c$ W
  CIRCLE     0.35560                                  DARK
6 P' u; i) R# o  CIRCLE     0.36830                                  DARK
# e# d$ l' t( K  CIRCLE     0.38100                                  DARK
: t" x' d; L9 d( h6 D  CIRCLE     0.39370                                  DARK + |* c, l7 B' H) a- g
  CIRCLE     0.40640                                  DARK
9 T! k+ J  m. D3 J% n+ j  CIRCLE     0.41910                                  DARK   t* x3 ~0 x% v- F( X
  CIRCLE     0.43180                                  DARK ) _" v# y4 a3 t& X, ~4 i
  CIRCLE     0.44450                                  DARK
: ?3 l# y4 J/ g* g  W6 V* v  CIRCLE     0.45720                                  DARK ) z$ k7 ~4 R: C2 f1 Q9 \8 l
  CIRCLE     0.46990                                  DARK
. e6 H# ^  B$ o; O  CIRCLE     0.48260                                  DARK
, p  ?8 P# H+ m; k5 i4 C# ]) G  CIRCLE     0.49530                                  DARK 9 ?: m$ R( Z8 Y8 Y& `1 @+ Q8 q0 P& N
  CIRCLE     0.50800                                  DARK
* Y% F. |9 P2 s8 Q  CIRCLE     1.01600                                  DARK
, g# p0 L- n* X3 {, j, w5 z
# W; {* a+ d5 u. `     L1 created with warnings3 ]7 l* ^0 k6 E1 O* t  ?" a

2 s; Y. C7 N, ]  G" z
* G, D0 Q) j( V/ {$ k- L; O================================================================9 G  K2 h# y) j3 I" }  {
     PROCESSING FILM < D1_2.art > ...7 X" U9 b' _9 }9 B8 F9 b
================================================================
* W; J# J, ]7 R3 i' R) ~! L
. w+ C$ s# R4 @* B7 k5 r; f9 T& a  FILM PARAMETERS :
+ a! f$ Y# ]4 o2 Q$ d6 @# U. D  ---------------------------------------------------------
. y* u8 d3 {* @' I  Undefined line width                0.00# ^% `8 [; q$ d$ D& G7 z
  Mirror code                         NONE: V) `; v( d# M2 @
  Rotate angle                        NONE
, i( \+ q0 m. q$ T" ~. q; F9 j  Offset x:                           0.005 V# B, }8 k: o
  Offset y:                           0.00
' l5 m& i  H7 }% ?6 j  Plot negative                       NO3 d* F5 q: u7 _! o9 e. K/ v
  Suppress unconnected internal pads  NO6 n( Y3 W3 g: p$ G( g1 y- L/ B

( X) ^$ T, C! j/ q8 |
) d6 ]  k  p- m0 Q1 h$ X3 z, D) T% y0 ]- f) D0 Q. A6 {
  APERTURES USED:
: B1 g' U/ j) O$ ^. i5 w% @  ---------------------------------------------------------
% S7 |$ A/ N3 ^+ m4 Z2 ]  TYPE       SIZE/NAME                   ROT   MIRROR MODE ) `/ [/ U( T3 J, ?' o) y% W1 r3 R
  ---------------------------------------------------------
% S! X" H7 u* R4 Y# q  CIRCLE     0.25400                                  DARK
6 k0 e4 o: B8 H2 d- g  CIRCLE     0.50800                                  DARK
% C; q  X) C6 o; x& w
: a- `6 ^# u: e4 z& j     D1_2 created with warnings
" j  z+ G! G/ `2 j3 l& ~
  r# L4 y' d, |0 l
* Q1 w6 t) X! \================================================================
* G5 M" j6 i1 ~4 P; b     PROCESSING FILM < L2.art > ...8 A& F! k, h. m2 ~; p8 ]
================================================================7 _0 W) h* V* ?2 ?" G, s1 _6 S% V
) Z! C# g7 v. g0 B5 g
  FILM PARAMETERS :
! n. c/ n3 v& o  ---------------------------------------------------------& C5 d  O. y& V; c5 O2 j
  Undefined line width                0.003 C5 C* r1 q: R5 P% X
  Mirror code                         NONE# _0 k6 \- m. [# b, l1 z7 z
  Rotate angle                        NONE# W" z* B8 ?% r  ^
  Offset x:                           0.00- Z; L! }$ K" t- x: R- Y
  Offset y:                           0.00
4 J  l6 [& Z: ^% ~  Plot negative                       NO, k% u3 P; |; b( @  w9 q9 d
  Suppress unconnected internal pads  NO
6 V9 u$ Y2 o! {' G8 D5 H. E. a
7 T  h# k6 N. M    WARNING: Segment with same start and end points at. ?5 b- B( u* K2 }0 f
        (68380.01 -409974.98) will be ignored.  Increasing output+ d$ E# L" @) g8 G' \
        accuracy may allow segment to be generated.
/ _1 p* ^6 q; I, C8 ~( p2 d5 u' f7 V# S& R" j
    WARNING: Segment with same start and end points at: I8 h  H6 X$ u
        (68380.01 -375974.98) will be ignored.  Increasing output( G: N5 _. E& W1 k/ B; s  f
        accuracy may allow segment to be generated.
0 s! |# F- H+ z# N' S; Q4 ^, s  G8 ]
    WARNING: Segment with same start and end points at
3 p3 w4 q) Y  M/ r- o        (68380.01 -341974.98) will be ignored.  Increasing output
$ i$ @# D  j6 E        accuracy may allow segment to be generated.
, D9 ?0 J' B0 V; w9 @8 T% o& ]& g$ M' W) i4 v( C4 `  l
    WARNING: Segment with same start and end points at
7 J, C& }4 t" G8 ]  L        (68380.01 -307974.98) will be ignored.  Increasing output; m0 X; u0 Y1 |4 f, f) `5 ]
        accuracy may allow segment to be generated.
( t+ a% j( n4 e5 U
" F$ i( y1 P6 X    WARNING: Segment with same start and end points at# [* a9 l6 U( e4 t: A
        (68380.01 -273974.98) will be ignored.  Increasing output
8 k' F* v' ^6 |! \  c( V2 j        accuracy may allow segment to be generated.- x- E0 G8 a1 p# x9 @9 {

) U% o; m7 c( c7 C    WARNING: Segment with same start and end points at' p) w& {; D+ Y& o+ i$ D" e: J, c
        (68380.01 -239974.98) will be ignored.  Increasing output
: A4 n/ S$ Y) U0 |: n        accuracy may allow segment to be generated.
1 \, t, @& e, V1 S1 m4 a5 l/ z' f
( a: T& `3 i5 o5 \: H6 K/ n# P    WARNING: Segment with same start and end points at' V' Z% V9 n! ]) P- E! n
        (68380.01 -205974.98) will be ignored.  Increasing output
9 g( x! ?/ c( T. k0 r        accuracy may allow segment to be generated.$ T& b! y& F/ l# e

. O& @. V# q7 i; h6 e' e    WARNING: Segment with same start and end points at
8 d. w3 W5 Y* e        (68380.01 -171974.98) will be ignored.  Increasing output* {& m0 O5 c) p% ^0 W! S; E; k) t
        accuracy may allow segment to be generated.
8 k1 m3 A6 \5 ^0 q" o+ v& n; u% |! A8 e) ^( _3 h& l7 E
    WARNING: Segment with same start and end points at
* j5 t8 C) s; |# \. J" z        (68380.01 -137974.98) will be ignored.  Increasing output
6 R  e' X, m% }        accuracy may allow segment to be generated.
3 \  ~  F' G: Y( Z: `/ R$ ?- u! V9 e% h3 v" U$ f
    WARNING: Segment with same start and end points at# i: T6 I6 o. S/ b. o  \
        (68380.01 -103974.98) will be ignored.  Increasing output! E0 [4 I# v: J# W7 c6 h
        accuracy may allow segment to be generated.
2 B, \0 l; s3 ~  x0 N, F
( J+ j  t' a- e    WARNING: Segment with same start and end points at8 Q" `0 V  ^8 R! b. _7 m6 T1 o
        (68380.01 -69974.98) will be ignored.  Increasing output  ]# K* I( r3 s' D; l$ S3 s
        accuracy may allow segment to be generated.7 m* U) ^& k; z$ K/ R# G
  W; |% L% P2 F* X
    WARNING: Segment with same start and end points at
: q  t3 W1 u% ]3 w6 x. t  Q5 P& n        (68380.01 -35974.98) will be ignored.  Increasing output
$ d' D1 m( r' Q        accuracy may allow segment to be generated.
) N* q" c! k! G$ Z' p  p9 _/ Q- G8 f9 Z. h* u9 F5 M  B3 x
    WARNING: Segment with same start and end points at
  M9 M1 s. p% _8 L        (68380.01 -1974.98) will be ignored.  Increasing output$ J1 v! N- }8 ^
        accuracy may allow segment to be generated.9 C2 }- w' U7 ]; K8 ~% A

2 i- h: f, R1 O, V/ M, p; e    WARNING: Segment with same start and end points at
4 K* F1 Z2 C& t. z7 A1 P1 X        (102380.01 -409974.98) will be ignored.  Increasing output5 B2 ?8 }5 F- h! S+ A8 B8 W
        accuracy may allow segment to be generated.; ~/ K- v$ j6 }& l! x

- ~* T2 r* S/ E4 @8 t& f7 k    WARNING: Segment with same start and end points at9 {; ?6 h. N6 K, r9 p; o
        (102380.01 -375974.98) will be ignored.  Increasing output1 z& T' v/ C2 A% G8 |8 L
        accuracy may allow segment to be generated.
3 a" r" _: p9 U% I- p* }3 m( I( G2 I8 W
    WARNING: Segment with same start and end points at
3 h& L2 U( V1 h0 a        (102380.01 -341974.98) will be ignored.  Increasing output
1 _, H" e! _, h  R: j5 H        accuracy may allow segment to be generated.' V3 I9 {% O  c; N0 {: F4 L5 s

, P" e# l3 d+ V" R: |    WARNING: Segment with same start and end points at4 ?& }: i" Y$ z
        (102380.01 -307974.98) will be ignored.  Increasing output! f6 L* b! t5 O- |7 t) l- ]
        accuracy may allow segment to be generated.- q; s, q. a3 Y; S  _, |. s: K* x

- N0 q4 p& m& P8 q3 T; }' w) ^: o" g    WARNING: Segment with same start and end points at
) {) g8 V$ j7 Z+ ?! T& G  x        (102380.01 -273974.98) will be ignored.  Increasing output
9 J) v; s3 m9 @6 G, e" K  N        accuracy may allow segment to be generated.* L' z1 i. j& J" m9 O
( }4 V+ q* z  s/ p4 M* d- _% K* Q
    WARNING: Segment with same start and end points at& n0 d  o2 N0 M( ?0 _% N% t  `& s
        (102380.01 -239974.98) will be ignored.  Increasing output: p& }' l, D& @- C0 I& @% o7 Q
        accuracy may allow segment to be generated.
: x+ i. B; _+ Q7 X4 R
9 r0 f( g5 |9 l6 C% k8 N  C5 S% w    WARNING: Segment with same start and end points at
! x. u' G! c% n        (102380.01 -205974.98) will be ignored.  Increasing output3 D% h0 J1 q1 y5 \. e, C2 X
        accuracy may allow segment to be generated.
% v/ X3 z6 @/ y1 V& X* n# j
/ |6 [% S( l0 Z: a7 T+ b# r    WARNING: Segment with same start and end points at7 w9 \, _* T; ~# X/ d# G
        (102380.01 -171974.98) will be ignored.  Increasing output
: l' W$ P" o" ?        accuracy may allow segment to be generated.. E8 R9 u$ d- |! C
1 W5 a0 l0 {5 [6 B; ?3 o# f2 M
    WARNING: Segment with same start and end points at# {4 ?5 @( u4 [: v- U5 p. H
        (102380.01 -137974.98) will be ignored.  Increasing output/ u( M: g5 l; B  S
        accuracy may allow segment to be generated.
& n  q# t. S  Z: a+ m0 D" k0 }2 Z9 G4 t. t# V/ N
    WARNING: Segment with same start and end points at
4 ^' W* ]9 i3 u  S, L# F        (102380.01 -103974.98) will be ignored.  Increasing output
3 o- k" q. x3 g8 }+ e        accuracy may allow segment to be generated.
* D# L7 ?% B2 @& H  p9 G) K" N! T! r* \- ^! l; m# L5 ^/ ^
    WARNING: Segment with same start and end points at
2 J# h9 z9 V; q1 e! U+ W. @( r        (102380.01 -69974.98) will be ignored.  Increasing output
" d7 J1 L0 K9 F! b) t5 `) ?( D        accuracy may allow segment to be generated.
$ A- p% g3 W  `5 M# x/ s6 |# L: G, T+ h8 w% S$ R
    WARNING: Segment with same start and end points at
' ]" n, H8 J5 {: a& L        (102380.01 -35974.98) will be ignored.  Increasing output9 H7 [( t$ f6 r0 D$ j# v
        accuracy may allow segment to be generated.
8 N3 z  K: ^$ J+ K3 k
  W. b6 P. E5 K: X7 P% @    WARNING: Segment with same start and end points at
; _" M& @9 w2 B; M        (102380.01 -1974.98) will be ignored.  Increasing output
0 Z8 s6 E+ U2 w  l* b7 c        accuracy may allow segment to be generated.
% |0 Z. n/ k0 m. q/ \: P* n
# x0 r! B7 j/ P, m    WARNING: Segment with same start and end points at
: @5 G( z" K- O  j/ h- z$ Y0 X        (136380.01 -409974.98) will be ignored.  Increasing output
8 m1 C! [) M* o4 Q% z3 G        accuracy may allow segment to be generated.# Z6 y! f' `# @- D$ ^
0 q+ l) {5 p  X1 f6 i
    WARNING: Segment with same start and end points at2 d$ M! B7 T7 R7 f0 ~- d
        (136380.01 -375974.98) will be ignored.  Increasing output
! y. s4 n6 y) b/ G4 @. c        accuracy may allow segment to be generated.# F# s: @$ c+ f

8 L9 K) U% Q2 K! O' C* t# P2 k    WARNING: Segment with same start and end points at" v% {# z5 W# ~  L/ N
        (136380.01 -341974.98) will be ignored.  Increasing output
5 v% u+ a2 z0 ], o  F3 k/ `/ @        accuracy may allow segment to be generated.6 I# q: l. n0 k" P5 w
8 ?# g9 L" c, W" i0 J. @1 v
    WARNING: Segment with same start and end points at% G$ g5 ?4 \1 w3 k
        (136380.01 -307974.98) will be ignored.  Increasing output
! j0 u+ |) ^8 v# W( M3 U1 M& a        accuracy may allow segment to be generated., c& J% y5 t- D. X8 y
8 K! V6 e; k# I1 V4 K* i* _1 r5 ~
    WARNING: Segment with same start and end points at) ]! F  Z& i5 f6 _* g, Z5 O1 x7 c
        (136380.01 -273974.98) will be ignored.  Increasing output( n: o+ m& W9 n1 x
        accuracy may allow segment to be generated.
! W( @1 s. D# l! q- o4 o- A
8 r, F6 n" F% C+ U. J* l; b    WARNING: Segment with same start and end points at  @4 H1 _! y) f" C8 J  p6 H' A
        (136380.01 -239974.98) will be ignored.  Increasing output+ b  @0 g' [$ `  A
        accuracy may allow segment to be generated.
  u( d  L0 E: d& m, t2 e6 Q" K" ?: y- e; F
    WARNING: Segment with same start and end points at; Y. b$ l3 C6 E4 [' |1 y5 r
        (136380.01 -205974.98) will be ignored.  Increasing output/ C& u! N# `+ b6 A6 [' }8 _
        accuracy may allow segment to be generated.
& r( f$ Y* s3 |$ Q) s) Q7 l# Y. G, q7 }- |! ?/ _1 o1 i
    WARNING: Segment with same start and end points at
) @2 C2 a! w2 B; b1 P( _        (136380.01 -171974.98) will be ignored.  Increasing output% d0 p$ i- i( [, ~
        accuracy may allow segment to be generated.
6 i) F4 f7 I( s- c, G/ d
. l7 C$ G$ @  z, y& N( J. h5 N    WARNING: Segment with same start and end points at
; w! _  J# C. f        (136380.01 -137974.98) will be ignored.  Increasing output' ]) Z; V( A6 C: b
        accuracy may allow segment to be generated.* o: e  w* Q' ]; Y0 t/ j! B
0 f! }, `" E, E& o; _( f5 W/ S
    WARNING: Segment with same start and end points at
% T" u( c. z9 L4 C9 o. s        (136380.01 -103974.98) will be ignored.  Increasing output
: ?5 [; P2 w& T; }! ?" n6 D        accuracy may allow segment to be generated.
" r9 O, _  E: |7 E0 Y7 v, e6 p' Q& n
    WARNING: Segment with same start and end points at- l! {, y, ^" A
        (136380.01 -69974.98) will be ignored.  Increasing output1 l3 [2 H% w6 m
        accuracy may allow segment to be generated.6 \& c+ C" q  H$ {2 e7 J

9 q" Q" C9 d' f- B/ ~    WARNING: Segment with same start and end points at, e. H; S, M, h& R  B2 F
        (136380.01 -35974.98) will be ignored.  Increasing output  A! {3 z5 o  Q) W9 C6 I
        accuracy may allow segment to be generated.; p- p6 I9 o+ p9 |: L
- ^3 @* y2 k9 C- Y) d* q
    WARNING: Segment with same start and end points at8 Z  P3 T- ?0 R0 h6 ]$ {
        (136380.01 -1974.98) will be ignored.  Increasing output& f( ]) z  d) @0 l9 W* z7 _8 o
        accuracy may allow segment to be generated.8 A: S0 T: o& h9 g7 s

  s. b5 W5 p; l    WARNING: Segment with same start and end points at
. ~1 O" {( L9 L% [7 Q  W% S        (170380.01 -409974.98) will be ignored.  Increasing output. p7 F( x, X+ _5 U1 s
        accuracy may allow segment to be generated.
/ t8 {7 r+ {; K) a4 [* ~
+ Y- Z  M- B; v0 w2 w  U6 ~    WARNING: Segment with same start and end points at
; Q4 K, u5 _/ V. T9 }( g9 [        (170380.01 -375974.98) will be ignored.  Increasing output
- z8 P# E+ e8 ?: f        accuracy may allow segment to be generated.( I7 F! Q- R3 V
  e. d; a! e! `+ n& Z
    WARNING: Segment with same start and end points at
& f  u4 Z& b+ j* i8 b- p1 v        (170380.01 -341974.98) will be ignored.  Increasing output$ M1 {4 Q' P- A3 {/ C/ L6 Q. o
        accuracy may allow segment to be generated.5 A# E" _" F0 O
1 X, x) ~; l# d# m# Q5 o1 Y  p
    WARNING: Segment with same start and end points at. [/ M; x) w, c4 w) n0 A
        (170380.01 -307974.98) will be ignored.  Increasing output
' {  C5 @. ^  z# T1 C: j        accuracy may allow segment to be generated.
1 P7 H- N/ x; T0 [; E' |1 F* m# X7 R4 Q$ @1 N- ~
    WARNING: Segment with same start and end points at/ R; W2 S, b6 A/ H% k
        (170380.01 -273974.98) will be ignored.  Increasing output; M& k! V: A8 E2 `* v
        accuracy may allow segment to be generated.
/ g) g8 p& d$ i" A
) u( x6 W- z  L8 Y5 h4 I5 p    WARNING: Segment with same start and end points at
) L) G) J$ D. I  ^1 u6 [        (170380.01 -239974.98) will be ignored.  Increasing output
3 {) a0 k/ a0 q9 W/ x* ~: Z        accuracy may allow segment to be generated.; _; p$ p) @8 z0 X* |+ O
; ~, Q' H, g( k
    WARNING: Segment with same start and end points at
" q  Q6 M; O/ l* I        (170380.01 -205974.98) will be ignored.  Increasing output" U3 C7 a8 X8 x- V; O0 j, w8 f
        accuracy may allow segment to be generated.; S8 O7 R1 p) Z1 [: G- f

: o! Y, W  x! n( X; z9 J    WARNING: Segment with same start and end points at
( A) [7 h$ @* W. j" b        (170380.01 -171974.98) will be ignored.  Increasing output
! M( i, a* p5 ^) f& I% E        accuracy may allow segment to be generated.: x7 o" }1 k) D
/ G) ?/ R* H  Q$ q. h% v9 w! S
    WARNING: Segment with same start and end points at
$ k" {3 p. g2 ]4 D$ N. K        (170380.01 -137974.98) will be ignored.  Increasing output
( a, G; _5 |( H: r! S        accuracy may allow segment to be generated.' Z& h" ~% {9 h8 l) L8 i
. S5 w) s) Q2 Q7 n' }0 S5 W
    WARNING: Segment with same start and end points at
& D. o1 j$ O1 Z        (170380.01 -103974.98) will be ignored.  Increasing output: E) s" A0 h8 W8 s5 v% |
        accuracy may allow segment to be generated., y" h, h1 z% q3 H( F* }7 U9 J5 O

" Z: S1 A3 Y+ Y! U. A3 U    WARNING: Segment with same start and end points at
; E& b( T- @9 ~1 \- r2 v7 `        (170380.01 -69974.98) will be ignored.  Increasing output
9 A- V( E3 O8 J8 l7 ^( q$ J        accuracy may allow segment to be generated.# c2 U) x5 W2 y2 H  J

$ n! x: }5 s6 j8 c, n    WARNING: Segment with same start and end points at
7 T" i- ^" M/ R- t5 N2 N2 h        (170380.01 -35974.98) will be ignored.  Increasing output
0 f2 e2 P$ y3 p- j        accuracy may allow segment to be generated.
5 g. z2 l/ q* _3 T  o
: e8 _6 V! _2 p" R  A5 D    WARNING: Segment with same start and end points at+ s/ B8 a8 l& l; r8 e! @3 ~9 ~
        (170380.01 -1974.98) will be ignored.  Increasing output1 ^1 n9 h  Z. P: Z+ _  X
        accuracy may allow segment to be generated.
8 R: ]" W7 p+ f4 v$ u! R! J, R7 q$ w; f* C* F6 z5 F, ]+ }
    WARNING: Segment with same start and end points at
$ e1 |) R8 m% B* H. \        (204380.01 -409974.98) will be ignored.  Increasing output3 F1 n* S- x9 ~" [
        accuracy may allow segment to be generated./ B0 {+ K% L. t, a8 U4 [* {) V

1 X1 ~% C( R: o! l. C, A    WARNING: Segment with same start and end points at
' v7 s3 D8 ]9 y        (204380.01 -375974.98) will be ignored.  Increasing output4 ^9 T0 ~9 b0 j2 ~* d# Z/ l* `
        accuracy may allow segment to be generated.& d5 Q5 X5 H' p% O) C9 S3 V* f9 T+ L5 q

5 H" f! m7 K+ E9 R% t# M    WARNING: Segment with same start and end points at8 u3 ^/ m+ V# o: @$ B/ @+ z- V
        (204380.01 -341974.98) will be ignored.  Increasing output
" t9 O* _' y, [        accuracy may allow segment to be generated.
. N: ]5 H8 F# h. N' p
& c# b0 T# t1 e5 h! w    WARNING: Segment with same start and end points at9 |4 V3 b0 C$ d
        (204380.01 -307974.98) will be ignored.  Increasing output8 W) T0 y4 L0 a- t8 b, L
        accuracy may allow segment to be generated.
* B. E0 o+ z; h, m& o; l& Y! r- S$ |4 H4 f2 _  F$ n" r
    WARNING: Segment with same start and end points at1 H8 J' Y2 d. `2 j# k  b8 v
        (204380.01 -273974.98) will be ignored.  Increasing output, ~$ {1 [# S$ ?; O% x. g8 C9 }
        accuracy may allow segment to be generated.
' s: d0 l' u+ W+ F/ A! P# `: n9 i0 s$ S, {: z# E9 ?
    WARNING: Segment with same start and end points at
/ `! |- u$ P5 _9 P- `( ?" U        (204380.01 -239974.98) will be ignored.  Increasing output3 [; R8 d# ?- B) |
        accuracy may allow segment to be generated.
4 M; d4 D3 O$ {" t# v0 l( M& G2 o7 N0 Y7 y7 |# l6 R, I  x$ o
    WARNING: Segment with same start and end points at
6 c  u8 ^# S) G* J        (204380.01 -205974.98) will be ignored.  Increasing output3 q% w" [- P4 I+ y5 g
        accuracy may allow segment to be generated." ~, _! O$ ~& s) P6 t; G7 F

5 \+ L* |# x  w& C    WARNING: Segment with same start and end points at
/ a; c' m# o% Q+ e) r        (204380.01 -171974.98) will be ignored.  Increasing output
% y3 l& ?3 b3 A7 A6 t5 c        accuracy may allow segment to be generated.
, \; Q$ R, o! p4 x; f) M9 B6 U( l5 p  D$ ?
    WARNING: Segment with same start and end points at
- j% a* P) E4 P        (204380.01 -137974.98) will be ignored.  Increasing output9 k' b& l6 w( ]) E$ U2 ^0 q0 I
        accuracy may allow segment to be generated.* Y* j! f$ k* ~2 S7 }- k1 q
9 N. _( j0 M- W, Y4 |1 [2 O8 M
    WARNING: Segment with same start and end points at
! Z7 q- T3 t3 s* ~1 j! E- _        (204380.01 -103974.98) will be ignored.  Increasing output, Q- e4 Q' x, |) S
        accuracy may allow segment to be generated.
1 E/ u: X/ B" v  ]4 H8 x* v+ T
! U. ?4 {- m% T8 B( W    WARNING: Segment with same start and end points at
4 c: c2 w- F9 _5 n4 I5 u& L        (204380.01 -69974.98) will be ignored.  Increasing output
/ P/ T7 r4 m. J, |/ |  N) P  z9 r        accuracy may allow segment to be generated.
9 ]6 h6 [/ Z' T' l
0 N9 r  I1 G. j  \+ ?    WARNING: Segment with same start and end points at$ j& |, ^& s6 |2 s& n
        (204380.01 -35974.98) will be ignored.  Increasing output
. f' f# \- Z- _' ?' _- g2 ]        accuracy may allow segment to be generated.9 _4 m8 L5 W9 o8 M6 T. s6 f0 I
8 c2 x+ s1 Y1 S. s, V( m/ W8 c
    WARNING: Segment with same start and end points at
8 g. ~8 Z7 O" _( M( d6 ~        (204380.01 -1974.98) will be ignored.  Increasing output& U4 ?3 f( B. h' x$ `
        accuracy may allow segment to be generated.
) \5 ]" k- O* M1 l3 T7 X2 |2 L" x* a6 o  e# d. p
    WARNING: Segment with same start and end points at2 x3 T( _; h4 b. k# ]8 ?* z" z
        (238380.01 -409974.98) will be ignored.  Increasing output# E$ t0 W8 V' y! b5 G. {
        accuracy may allow segment to be generated.
2 G; L8 x. h5 B' ~2 ]* A& R- y5 s: D& o' x1 q/ o
    WARNING: Segment with same start and end points at0 C1 Q2 _% E! S/ w" v' F( C: O4 a0 `
        (238380.01 -375974.98) will be ignored.  Increasing output
( L9 t% T# K+ s" l& X( T3 {% M) a        accuracy may allow segment to be generated." I: n1 `* d3 ?! y6 c  B# B

5 q3 L' ?8 x% X8 J$ W" Z    WARNING: Segment with same start and end points at
5 ?3 S0 e% ^  d' }9 b) \" a; s        (238380.01 -341974.98) will be ignored.  Increasing output1 ^: l8 P( S6 L5 Z* L
        accuracy may allow segment to be generated.* o4 u+ I# p# }( V
' s# ~+ i; A2 c. j  d7 k; f
    WARNING: Segment with same start and end points at
5 ^- o, O6 `- ]) Y0 [/ Z        (238380.01 -307974.98) will be ignored.  Increasing output* r" H$ z7 K! x. I, T' ?( q6 I
        accuracy may allow segment to be generated.1 H2 K* m3 U4 k& o) l- o% o

! i$ j' L8 N* V5 Q    WARNING: Segment with same start and end points at; Y% X7 h+ V! T: ]* E! c! h1 V+ _
        (238380.01 -273974.98) will be ignored.  Increasing output! m  z0 V4 l, P' m1 }! A7 H3 O
        accuracy may allow segment to be generated.- ?& n* n" n2 w  z8 h7 w7 W

5 o! F( X4 r9 G" B    WARNING: Segment with same start and end points at
  c6 I( p, o( `/ s" t7 S        (238380.01 -239974.98) will be ignored.  Increasing output
* W" j& }# f8 x0 j        accuracy may allow segment to be generated.
% |; F; S9 e+ \8 R2 ~2 m/ o5 d# Q6 e
& _: C" l4 O5 |    WARNING: Segment with same start and end points at
- Q" U. w0 D! ]+ t# R/ \" Z        (238380.01 -205974.98) will be ignored.  Increasing output
( e7 l- N+ B9 J7 B& {; F( m        accuracy may allow segment to be generated.  u% g& c  j2 G2 ]6 x

0 v- X9 n' f6 ~& Y% V* m& R2 A    WARNING: Segment with same start and end points at
: S6 b6 {5 C; C% \& X        (238380.01 -171974.98) will be ignored.  Increasing output
# F( j) M* K7 B0 h0 ^( b+ \        accuracy may allow segment to be generated.
  ]4 _5 l3 \0 x* g- B7 o8 P$ O* `4 N$ @
    WARNING: Segment with same start and end points at
& [! O6 U, p% F. Y        (238380.01 -137974.98) will be ignored.  Increasing output+ U$ V  K0 Q+ Z1 O1 j) w
        accuracy may allow segment to be generated.- H$ S  r* t' F% |% F. j+ T. x" m

5 B$ Y# f$ Z; [7 |    WARNING: Segment with same start and end points at& u$ g- L/ v8 X1 v
        (238380.01 -103974.98) will be ignored.  Increasing output( N$ i5 K2 p  H# w+ e* v0 i+ \! A
        accuracy may allow segment to be generated.5 t, F/ f3 L1 g6 k, m
4 o0 b+ Q* {4 u; T4 r  a
    WARNING: Segment with same start and end points at
0 ]# p& _! h9 {& Q8 Y( O        (238380.01 -69974.98) will be ignored.  Increasing output
+ {6 R, L/ ~1 l/ r5 }# S0 m: F$ D1 y        accuracy may allow segment to be generated.
! M7 R5 l  f: A+ J; A2 B+ X, D0 I7 E) K7 z7 s
    WARNING: Segment with same start and end points at5 m) m- I- `' {: P( H' l: a
        (238380.01 -35974.98) will be ignored.  Increasing output& }9 n) m4 `/ A2 m. f
        accuracy may allow segment to be generated.- j* C' z. N+ Z* ?0 ~

5 t: U# h0 r( L+ e    WARNING: Segment with same start and end points at8 q7 F  W1 k+ [0 T1 P
        (238380.01 -1974.98) will be ignored.  Increasing output
/ G. L0 O" E) S# K% G9 q7 J        accuracy may allow segment to be generated.
1 H! h; Z+ o) c/ C# t7 f- M7 X
6 t* l- Z, j! S, P4 B5 l! }1 @    WARNING: Segment with same start and end points at
* ]1 P  O; @) T5 F8 _. C% N        (272380.01 -409974.98) will be ignored.  Increasing output3 m2 @3 a. m! a" W- ?+ F
        accuracy may allow segment to be generated.- F2 F. W, [# t$ O: G
; R" A& z& W( B" k5 R# H) r
    WARNING: Segment with same start and end points at
( E3 f1 h! P$ M' E( U7 v$ Q  j4 W        (272380.01 -375974.98) will be ignored.  Increasing output
, W7 G( H" F$ }) H9 y) u  b% V        accuracy may allow segment to be generated.
( ~& S6 s3 B1 t/ W7 F1 e2 I) H
" E$ t4 o7 M( S& \' i0 n# U( ]" h8 c    WARNING: Segment with same start and end points at) {8 d) y) Y4 p
        (272380.01 -341974.98) will be ignored.  Increasing output
1 S% O% ?6 E% ?        accuracy may allow segment to be generated./ y8 n8 F6 C2 h5 e

! k5 D4 e5 M) ?8 @9 x    WARNING: Segment with same start and end points at$ X! x2 L$ B  K- J) m8 ^
        (272380.01 -307974.98) will be ignored.  Increasing output: y3 ~% z2 c2 n7 E& `9 U4 u1 w- y
        accuracy may allow segment to be generated.
: H8 P7 I$ c: ~% s/ [2 F: p2 p" X4 B: O: ?" i% t# Q3 N
    WARNING: Segment with same start and end points at' ?$ _5 O% B& D1 B1 `
        (272380.01 -273974.98) will be ignored.  Increasing output$ F7 x: m, F# }' G0 ?' u: n) S2 Q
        accuracy may allow segment to be generated.
) E- R, ^" l* v% ~" p1 v
2 N" C7 E! b& S# {/ L+ @! S    WARNING: Segment with same start and end points at
9 F! R0 R" j1 X; }5 L        (272380.01 -239974.98) will be ignored.  Increasing output
  k( l4 X7 f5 ~& q        accuracy may allow segment to be generated.
% A6 ~& D' x2 D5 I3 f2 G! c: s4 ^' c- c$ S; S; I8 L: `
    WARNING: Segment with same start and end points at
/ L* ]6 a7 K* J) n6 k; B        (272380.01 -205974.98) will be ignored.  Increasing output; H6 S$ A' `4 ]8 z! y
        accuracy may allow segment to be generated.; f- J2 }9 \2 S5 x$ g
4 F; E) ]5 s- A3 T
    WARNING: Segment with same start and end points at: S3 v) i9 n0 J' G7 t9 a+ ~/ Z7 W. M
        (272380.01 -171974.98) will be ignored.  Increasing output
2 O6 m5 V' G9 R& h$ E0 n        accuracy may allow segment to be generated.
4 t' O+ m8 Q  `4 q1 \+ M8 K0 d* ~6 a' E) n2 C
    WARNING: Segment with same start and end points at
. T1 d( t7 s7 r6 y: e        (272380.01 -137974.98) will be ignored.  Increasing output1 ^& v' C1 x* _; _8 k2 p; D
        accuracy may allow segment to be generated.
$ j( r/ W4 B( q! s
6 ?1 x6 q# w; X8 M) H. d9 S. J    WARNING: Segment with same start and end points at
+ t' r# d: T" ^, W- Q  E        (272380.01 -103974.98) will be ignored.  Increasing output
9 C( J( q) j* [& R6 }- u9 L& Z        accuracy may allow segment to be generated.
$ E9 d8 Q) N2 \- i  q/ I8 Z( F) \% F+ H: D" w. ~
    WARNING: Segment with same start and end points at4 l5 _8 V" n5 s: _% L- N% g
        (272380.01 -69974.98) will be ignored.  Increasing output$ Y; f! A) G+ g" X: [8 J
        accuracy may allow segment to be generated.
: D5 I! M, |! o/ I6 \# M
5 Q5 I3 B  ]* ?2 R/ ]6 n    WARNING: Segment with same start and end points at/ C8 M  H6 _0 F9 ~" K9 r
        (272380.01 -35974.98) will be ignored.  Increasing output) z' p/ I! L; ~# b, ~3 H& @7 f
        accuracy may allow segment to be generated.. K7 u* \$ |$ m

0 V1 b0 g* a* p5 N7 H1 E    WARNING: Segment with same start and end points at
$ e4 w9 k; Y- u+ E4 [! S$ k        (272380.01 -1974.98) will be ignored.  Increasing output& g/ P5 ]% D3 w' ~0 n7 S0 d
        accuracy may allow segment to be generated.+ V, J4 ?* \' N. e3 P) @

9 ?! e7 K' e& i- G4 F2 t    WARNING: Segment with same start and end points at
% g5 H5 B0 X$ H8 \) B1 b, z        (306380.01 -409974.98) will be ignored.  Increasing output$ V) b% o1 M9 X% }) {7 {  ^
        accuracy may allow segment to be generated.
7 s- u2 |2 w- Z; ?; U& E* i; S
# ^" m: k$ G2 Y  C# D& ~+ {    WARNING: Segment with same start and end points at
5 J% c/ L8 ~9 u8 P        (306380.01 -375974.98) will be ignored.  Increasing output
4 a6 y4 X) ]8 V7 j- b        accuracy may allow segment to be generated.
0 D3 V" N7 w! Z# V3 e" B9 c) k9 y, H& x6 F+ D# |
    WARNING: Segment with same start and end points at
) e3 S  _7 p5 T) R5 m) o        (306380.01 -341974.98) will be ignored.  Increasing output- X) ~" D" W/ T5 }3 y3 R
        accuracy may allow segment to be generated.- J( M  n3 a' F& w8 N5 w' [# }

  d- [3 I( y7 {! ]5 D1 ?: j- f    WARNING: Segment with same start and end points at( O8 }) F' N  P- v2 ~2 G% B1 F
        (306380.01 -307974.98) will be ignored.  Increasing output7 i' Z  c8 b' J! N' T, _. G7 f. n7 W
        accuracy may allow segment to be generated.
' d* {! v4 ~- j8 ~' e/ g
) _% A+ e) C  n1 ~    WARNING: Segment with same start and end points at
0 _/ w9 X, B3 f2 N        (306380.01 -273974.98) will be ignored.  Increasing output
1 P4 B. Z  p& P8 c# f; v" q        accuracy may allow segment to be generated.
' E0 L' z. H' a2 A8 f) C# E0 e8 @1 p0 f( d( ]
    WARNING: Segment with same start and end points at' _! [2 Q2 K' g. T: t
        (306380.01 -239974.98) will be ignored.  Increasing output
! j1 w" ?/ ]) Q" J+ A2 \        accuracy may allow segment to be generated.3 P( m# N; n7 x' f- k& H- M7 A, q9 i

1 u& K: M' O. l! {/ j. J6 _4 p    WARNING: Segment with same start and end points at* ]3 t3 O, g: y
        (306380.01 -205974.98) will be ignored.  Increasing output
  y! B$ I7 J, b9 f2 ^( _- [7 U        accuracy may allow segment to be generated.
$ b/ u4 @  x% [
( n* E  m4 f/ }! j* w" ]" J! s* l" t    WARNING: Segment with same start and end points at+ ~; f% d5 r8 A) k: B5 h
        (306380.01 -171974.98) will be ignored.  Increasing output
8 E" @: ?, X/ S: \' b( k        accuracy may allow segment to be generated.
) Q8 i- ^0 O% l! d* B1 |' C9 B; Z  C
    WARNING: Segment with same start and end points at# Z4 ?# y% Q8 \% D2 {% W% a
        (306380.01 -137974.98) will be ignored.  Increasing output5 D( b( `; V% k. O3 U! \
        accuracy may allow segment to be generated.( F" t' d7 N; I% P, J) a4 @* Z

8 ^0 X" r( E7 l0 e# k! Q& e. f    WARNING: Segment with same start and end points at
- `9 C) E( d; u. w- N- v) s        (306380.01 -103974.98) will be ignored.  Increasing output
$ ~  ^6 B4 P8 _        accuracy may allow segment to be generated.
# o$ [0 {+ l1 o8 [! {0 G1 @% W3 Z6 ~3 l1 |5 R3 D" n
    WARNING: Segment with same start and end points at6 l6 T0 S$ W. F6 f, `0 |1 J
        (306380.01 -69974.98) will be ignored.  Increasing output
# `3 O5 s# N5 C: B        accuracy may allow segment to be generated.
5 R$ T' L4 x( d  `
% }" A$ A0 N0 L& S5 ?+ q    WARNING: Segment with same start and end points at
  L/ q( l7 _& L5 l% u1 c        (306380.01 -35974.98) will be ignored.  Increasing output
/ ^2 N9 Q+ c3 j4 \, |  g0 _        accuracy may allow segment to be generated.
# `/ i" z* ?/ X& _" ]+ Z$ E8 K0 o7 y) Q7 h  i# Y
    WARNING: Segment with same start and end points at
6 S. X1 S3 q2 B        (306380.01 -1974.98) will be ignored.  Increasing output
) `2 N4 }) X; l. u* h1 }        accuracy may allow segment to be generated.+ `, y& F' N$ X8 q" ?. ~5 H. h
  x6 I( p3 x  V
    WARNING: Segment with same start and end points at
* z8 C: _7 J- v: P* W2 A: W6 f! ~        (340380.01 -409974.98) will be ignored.  Increasing output
, I! Z" r/ ?0 f        accuracy may allow segment to be generated.- J) n/ p4 f8 R* ?! s9 Z

+ R# l$ |/ Q! [3 }. t% y9 ]    WARNING: Segment with same start and end points at
* p8 ^' W: K# X        (340380.01 -375974.98) will be ignored.  Increasing output
- _! G, S% t6 E5 M& ?# w- H- R! c3 n        accuracy may allow segment to be generated.; V3 C' R9 Y+ v  Q7 L
. S# M/ o4 |# e" v- @5 @
    WARNING: Segment with same start and end points at3 E0 m# R" b9 q
        (340380.01 -341974.98) will be ignored.  Increasing output
4 K& f0 a& B3 b4 O3 X/ R9 }  Y+ K& O        accuracy may allow segment to be generated.
# n) _6 _. }+ P0 Z) Y. D4 m: t) W4 p0 C
    WARNING: Segment with same start and end points at- q9 E% l0 q# N# f+ |
        (340380.01 -307974.98) will be ignored.  Increasing output! y) k; L$ B: W2 M
        accuracy may allow segment to be generated.
9 A3 `0 g* _! ~6 B8 t  r/ y& E% D0 L3 b4 }  @3 A* c
    WARNING: Segment with same start and end points at
+ d8 v. H4 ^2 e' v5 u; u# ~        (340380.01 -273974.98) will be ignored.  Increasing output
; ?+ }: c+ `5 h) o* }1 S        accuracy may allow segment to be generated.
/ O7 k3 J, G) b2 j1 M" o, _# O' T$ `" E! w
    WARNING: Segment with same start and end points at$ A6 Q2 D  q' _" F
        (340380.01 -239974.98) will be ignored.  Increasing output! M& [2 q. w* O( X" v: n( }* c
        accuracy may allow segment to be generated.- B% k# w7 t0 a9 w
' D+ }9 W& c4 I3 S
    WARNING: Segment with same start and end points at
9 c4 @* g9 l  Y' ^0 X3 W2 ]/ s        (340380.01 -205974.98) will be ignored.  Increasing output' p4 h/ w/ ~; V; o# O5 V2 W8 X0 r2 L4 k
        accuracy may allow segment to be generated.
7 C. o: C9 b( g
: g5 S" u' \: w, P( o    WARNING: Segment with same start and end points at* k; ], Q: ^- _, A2 G
        (340380.01 -171974.98) will be ignored.  Increasing output* A4 p6 D1 [# X9 \/ u1 |% [" A5 u
        accuracy may allow segment to be generated.
" V1 F* [3 o7 u6 p6 H2 F
1 M: C* p3 u% E2 ~    WARNING: Segment with same start and end points at
: d8 h8 `! v0 b/ |, M" \        (340380.01 -137974.98) will be ignored.  Increasing output  V7 g" I/ q7 I, u3 _$ I
        accuracy may allow segment to be generated.
4 d$ l! `# O. A1 v" R
/ i4 D$ g& X: h    WARNING: Segment with same start and end points at8 _& [6 e2 W6 R. ^1 Y  x
        (340380.01 -103974.98) will be ignored.  Increasing output% R8 _/ c' o5 M# c
        accuracy may allow segment to be generated.
! u+ Y; I, ^8 K( D: A
& m+ I& c6 Y, d9 K    WARNING: Segment with same start and end points at3 E/ O) h& T0 @5 M0 X
        (340380.01 -69974.98) will be ignored.  Increasing output
+ W. M5 k1 R* p, b8 w* l; o        accuracy may allow segment to be generated.* U6 O( U- `! O$ t

- B# n9 \( ]& X; A    WARNING: Segment with same start and end points at
6 j! p5 o3 @* {$ @+ f        (340380.01 -35974.98) will be ignored.  Increasing output
. P4 U' F) D: ~) V) |3 V% Z: U        accuracy may allow segment to be generated.
* c. v  I2 L5 G9 G% m8 Y
/ h" v" |( a, x( `( J4 x    WARNING: Segment with same start and end points at7 u- G9 Q4 [" \$ _- H7 X
        (340380.01 -1974.98) will be ignored.  Increasing output& o: L1 H' H. c' [; K3 [
        accuracy may allow segment to be generated.
5 [3 N4 R  n; }5 c8 |' j- B, o6 n* c) Y+ Y5 v/ P9 C
    WARNING: Segment with same start and end points at
# p4 q% l0 D; L+ D5 \5 g- u1 v        (374380.01 -409974.98) will be ignored.  Increasing output
# @. y. W7 P% a7 p; M        accuracy may allow segment to be generated.3 L. ~" Q* E8 y+ ?8 |8 _7 E
5 f' P7 }) z) \7 U" j% j& O
    WARNING: Segment with same start and end points at
8 k2 d9 |! _! Q7 s' _        (374380.01 -375974.98) will be ignored.  Increasing output
+ l- `$ P1 a0 {' t* ~5 q: v+ v        accuracy may allow segment to be generated.0 F# t) d- j! o$ @
, N& S1 R4 o$ G% w! C
    WARNING: Segment with same start and end points at: i) d- h7 H0 u7 i6 u+ @
        (374380.01 -341974.98) will be ignored.  Increasing output" j  v8 q' p7 e# T8 @) \  l+ X
        accuracy may allow segment to be generated.4 {7 I5 \, U) b$ a- g! I! X! V7 F6 @

" x/ m4 n$ D1 @# C% k0 V2 [    WARNING: Segment with same start and end points at' h$ y4 B$ {% N/ g$ J; w9 N& }
        (374380.01 -307974.98) will be ignored.  Increasing output. Z# t. v; _# h$ c  [% [
        accuracy may allow segment to be generated.; j2 v& I) p; _9 p" n
9 [; X+ s/ u6 d
    WARNING: Segment with same start and end points at
& r3 c' o6 p$ v  z        (374380.01 -273974.98) will be ignored.  Increasing output
8 F- R+ ?2 `" {, M% j# `        accuracy may allow segment to be generated.
4 N- |& Y- X7 ~7 E. j- W
) I; x& q# e  L% {0 M4 |7 {! S    WARNING: Segment with same start and end points at! f  x: u5 s, z4 f* s$ b; {3 H
        (374380.01 -239974.98) will be ignored.  Increasing output& {/ [& P- r2 E7 C3 D% T
        accuracy may allow segment to be generated.
0 G' X; _7 a% i* R9 {5 u
! j. y9 T, }+ v7 f    WARNING: Segment with same start and end points at+ e1 I3 d$ {: d* o( w4 o+ b
        (374380.01 -205974.98) will be ignored.  Increasing output( p/ |* M" U8 l  d- x5 ]% j
        accuracy may allow segment to be generated.
- M- t6 Q2 A5 `, [6 S( G
; ]& N/ e' ?- t6 v3 e' p    WARNING: Segment with same start and end points at
: z( Q& E* j# E        (374380.01 -171974.98) will be ignored.  Increasing output
' H$ L6 i0 a4 |* Z- ^' I        accuracy may allow segment to be generated.
. X3 n5 B$ m# `2 x/ Y8 o8 e
" B/ }' w! u& `! l    WARNING: Segment with same start and end points at) I) _! p; t  X0 n2 ^( J
        (374380.01 -137974.98) will be ignored.  Increasing output
* p- _$ E) p8 A; j2 V        accuracy may allow segment to be generated.
; V) H, J9 S, y/ ~6 y2 L) T- p# e" C5 O' N3 M9 u
    WARNING: Segment with same start and end points at7 M; A2 q0 o3 W6 m
        (374380.01 -103974.98) will be ignored.  Increasing output
$ l! C) K. h1 X8 [6 \" a) E        accuracy may allow segment to be generated.% p) @5 t  W5 b3 F6 P6 s) [* P

8 D! I' y) j$ C0 ~    WARNING: Segment with same start and end points at
8 z4 N# z  z+ E; ^( ~" v        (374380.01 -69974.98) will be ignored.  Increasing output
- c# u& B, G! u1 u, U' {2 Z        accuracy may allow segment to be generated.
  Q4 l6 g4 i% H% L; _" h" p( i' t! }/ q5 M% h) X
    WARNING: Segment with same start and end points at
' z6 |1 G9 W3 N/ X& E8 R' A/ y, c        (374380.01 -35974.98) will be ignored.  Increasing output
, w. H. D' p- ]' U& k! A: Q        accuracy may allow segment to be generated.& e: P+ X# T! k6 }! @; f7 d2 X! n
7 K3 n* v+ Y4 ^
    WARNING: Segment with same start and end points at
9 x' x7 [5 P- D' y5 i        (374380.01 -1974.98) will be ignored.  Increasing output
! U( c+ G. O6 p8 k) B% i        accuracy may allow segment to be generated.
# I& p( T( \* G2 a' @1 K8 }7 y& H  Z
    WARNING: Segment with same start and end points at
0 \( }0 Y- H8 M        (408380.01 -409974.98) will be ignored.  Increasing output1 E7 x( H( e0 Y$ h! D3 k( n+ a
        accuracy may allow segment to be generated.
& H! T6 b4 _+ {# e
0 H' {; E2 q0 ~, `" K* G    WARNING: Segment with same start and end points at
8 |( g9 k. ?" n1 ]8 a& C, I        (408380.01 -375974.98) will be ignored.  Increasing output
0 ?0 r" P  e8 j6 }3 }9 Q  o* @        accuracy may allow segment to be generated.
# R+ o& l* [( R5 s
: b; c" g3 p+ d) b7 D' J    WARNING: Segment with same start and end points at" W2 G; l7 K/ s! ]+ @6 w
        (408380.01 -341974.98) will be ignored.  Increasing output$ d, A5 m" t9 A: D" B+ ?9 \
        accuracy may allow segment to be generated.
$ d" ?& V; J; o+ N3 u
# |# O3 o7 T4 v- k    WARNING: Segment with same start and end points at
8 @  m# x) {: O6 k        (408380.01 -307974.98) will be ignored.  Increasing output# }) _$ Z  q$ l- t
        accuracy may allow segment to be generated.
* K( K  f/ ~9 a! x  Q% t# H2 {, j
& f  K5 q1 ?2 t, c, i# o    WARNING: Segment with same start and end points at
6 ^# W+ w2 P) _3 e( W' X        (408380.01 -273974.98) will be ignored.  Increasing output
: w+ ]$ g) C) @- }0 p        accuracy may allow segment to be generated.
: S8 m! t& ?1 ~. f1 c, y: Z' k& S& L6 x) k8 s4 ~7 A
    WARNING: Segment with same start and end points at
2 V4 w: G' P0 J$ A        (408380.01 -239974.98) will be ignored.  Increasing output
4 U: n( V5 @. [! C        accuracy may allow segment to be generated.
2 c7 @' J; a( ^. M* r5 m4 b& a* G$ |
    WARNING: Segment with same start and end points at
, a: |3 J, G3 ~7 i) k. \        (408380.01 -205974.98) will be ignored.  Increasing output4 p3 B% I) }! G; [" [6 @% x- T
        accuracy may allow segment to be generated.
+ @0 @5 r2 t* ?( u: A' j  J$ h5 ], S  t/ I+ V
    WARNING: Segment with same start and end points at
  l! ~& R' L# M+ D2 A        (408380.01 -171974.98) will be ignored.  Increasing output
. D5 m+ m9 h8 \; e: C        accuracy may allow segment to be generated.
  G. P1 Y/ V* B
( x* g/ ?2 `: A  c7 H, L2 y! [    WARNING: Segment with same start and end points at2 X' V8 l% I) D7 p3 K/ b
        (408380.01 -137974.98) will be ignored.  Increasing output+ Y: Z9 b8 r/ u$ Z. b
        accuracy may allow segment to be generated.' B4 g% M7 w2 G$ f
) a9 k+ w  d& R  |7 P- A8 z
    WARNING: Segment with same start and end points at9 Y! ~+ Z2 n: e
        (408380.01 -103974.98) will be ignored.  Increasing output/ {/ B( T6 n! a3 {* v" i1 D
        accuracy may allow segment to be generated.
5 h* i* ^) P$ Z' \; ^
/ P- J; V. v" m% X5 T% q" h6 F    WARNING: Segment with same start and end points at9 s- J/ N3 F3 b
        (408380.01 -69974.98) will be ignored.  Increasing output
) V9 I2 p1 F( [        accuracy may allow segment to be generated.- {1 x" E* v6 |0 m
! o8 I$ J% H' Z" z$ P, l
    WARNING: Segment with same start and end points at# i& p8 x+ i" B/ L
        (408380.01 -35974.98) will be ignored.  Increasing output* W; g' R& F. D6 s3 S# _% g
        accuracy may allow segment to be generated.
6 {1 r, @2 M7 Y: D1 u3 l+ o/ E/ k2 d$ Z7 I- A- u: O/ P# I
    WARNING: Segment with same start and end points at" ~* s3 \" F, X1 y% ~/ [" Y( e" ~- B
        (408380.01 -1974.98) will be ignored.  Increasing output0 G9 D% F# {2 T2 J- C$ u
        accuracy may allow segment to be generated.3 s; O5 b& U! D- U; z9 \7 ^

5 h  }) X9 \: a' c    WARNING: Segment with same start and end points at
- R/ c8 Z3 M+ W2 @- n        (442380.01 -409974.98) will be ignored.  Increasing output
/ z& S: M) m& ?8 }        accuracy may allow segment to be generated.
: i; [; L3 w6 F" G" L% y' _# T/ ]! {3 x/ D5 [% m% e. G
    WARNING: Segment with same start and end points at0 y6 P% d, i1 m! d
        (442380.01 -375974.98) will be ignored.  Increasing output; p, T8 \. K# l( r4 s. S0 J
        accuracy may allow segment to be generated.5 q6 M" V+ C5 ?1 E$ l1 `5 e/ N
# ]' ~1 |7 J5 a& L
    WARNING: Segment with same start and end points at
/ _! L4 X& z" w        (442380.01 -341974.98) will be ignored.  Increasing output
$ X( p! {4 a# _/ ^        accuracy may allow segment to be generated.
$ Y6 [1 r( j; {, |
! m4 h& s1 ~# J* z3 o1 O- T    WARNING: Segment with same start and end points at
, h  s! x8 O. a) D) D5 I        (442380.01 -307974.98) will be ignored.  Increasing output
4 z6 \6 M* \: G; J% R        accuracy may allow segment to be generated.
8 a4 o/ c" C+ ~' b9 k* b5 q% l' u1 O: v  i/ L8 M0 g
    WARNING: Segment with same start and end points at+ |  M3 n/ Z' ^  t8 P4 Q9 Z
        (442380.01 -273974.98) will be ignored.  Increasing output
- I9 K" b0 J8 f3 Y, C        accuracy may allow segment to be generated.5 g9 ~+ a# W* j: o' d

# {2 L2 A( [; T9 \* Q% o    WARNING: Segment with same start and end points at" w: ~! b, I4 n7 v" D" X
        (442380.01 -239974.98) will be ignored.  Increasing output
% {: Q, g# v1 h5 {9 P1 X7 b6 Z% U2 {        accuracy may allow segment to be generated.) {, x1 v; ^! n# a( e
" a. q2 \* c; A( W
    WARNING: Segment with same start and end points at9 w7 u# W/ R/ K# H" D4 ], L
        (442380.01 -205974.98) will be ignored.  Increasing output% e. F/ q! j; k
        accuracy may allow segment to be generated.
/ H5 p6 H& ]# R4 j
9 c+ d8 O5 L$ h6 H$ g% c! L    WARNING: Segment with same start and end points at
1 i+ k' l2 g$ O        (442380.01 -171974.98) will be ignored.  Increasing output& i0 L2 @8 h/ l: i3 e, U7 C0 I
        accuracy may allow segment to be generated.
! I5 U# ]2 g5 D1 y* {( A0 b2 D: H; |) l+ Q
    WARNING: Segment with same start and end points at
0 Y* T( ~0 ]3 Z) P4 H        (442380.01 -137974.98) will be ignored.  Increasing output# f) J5 K( R$ s7 i2 u
        accuracy may allow segment to be generated.6 j# L" A3 d3 b
* x+ j4 q1 C7 ~
    WARNING: Segment with same start and end points at$ f( t' R, A' G0 l! G# b
        (442380.01 -103974.98) will be ignored.  Increasing output. u! y9 x+ H! E2 Y: i' H
        accuracy may allow segment to be generated.0 R1 m/ A+ Z8 J2 w

' I0 X9 y) r; j& D. P# R' n    WARNING: Segment with same start and end points at
9 z/ b! G6 T+ v) f& B5 H        (442380.01 -69974.98) will be ignored.  Increasing output
, o' L, t* V7 ^6 @/ D/ F5 c        accuracy may allow segment to be generated.& L7 c5 ~) e0 [8 y. j

6 B+ g8 l1 _, v5 }$ U9 Q
4 v$ }% E% ~9 i0 w0 t9 G2 t" _/ B3 L1 v+ b0 _
  APERTURES USED:
4 v6 `1 _  \+ L# A5 E  ---------------------------------------------------------+ X8 R( s, C& q/ R( J
  TYPE       SIZE/NAME                   ROT   MIRROR MODE
1 D( K" w6 J* N3 a* y3 N  ---------------------------------------------------------6 P2 I6 X- |" m
  CIRCLE     0.50800                                  DARK
. F  n$ E6 `% v; V% B5 Z$ r  CIRCLE     1.01600                                  DARK ! i+ j) T4 U  r0 N$ P+ }

0 ]0 Q7 q; ]# m. d( Z0 X4 `     L2 created with warnings
9 x5 D6 g# p7 T( F3 x* j; d9 d) t) k4 v
8 H! x5 @; w1 f' E  L1 C5 M
================================================================
+ t, C2 J4 b6 w0 O     PROCESSING FILM < D2_3.art > ...
" J* X; y7 M/ z================================================================7 @9 v, |. x) ]& l
2 \6 [4 Y  ^; T  _' G7 d5 e1 P
  FILM PARAMETERS :4 j7 R# a- R+ S3 w% j; x; }) @
  ---------------------------------------------------------2 M( |9 B1 t" V9 k3 Z9 \& U# S
  Undefined line width                0.00$ h( b: f1 U; x, t& ^  I
  Mirror code                         NONE
' F3 X/ v2 X* V* T8 l( q. y7 q  Rotate angle                        NONE* w$ w: ?: t, B( k' {3 _( V
  Offset x:                           0.00
* h' O& R/ h, B/ j+ ~( I1 V2 B  Offset y:                           0.002 Y0 Y# x! h0 n3 W& J$ d
  Plot negative                       NO6 v: B& n2 b1 _( ^$ [
  Suppress unconnected internal pads  NO8 H6 x5 D$ g7 l  Q: \& R
: N0 N2 m' S+ T' A0 n9 i) h

5 ~& i& P; u" y4 Q; }
$ u- Y) f/ P2 x+ x+ [" e  APERTURES USED:
4 R1 x$ o; P& S8 ?6 V  ---------------------------------------------------------
- z0 A* Z/ i3 B3 l  TYPE       SIZE/NAME                   ROT   MIRROR MODE
1 H. B" k" H: G  ---------------------------------------------------------
7 ~- e6 E7 K) N/ y  CIRCLE     0.25400                                  DARK 5 K) t$ L( z2 z# T) r. U
  CIRCLE     0.50800                                  DARK
2 Y8 i6 J- F& X- ]; L; ?( N$ [6 |- w
     D2_3 created with warnings" t% J1 h9 F' U2 [6 v! M3 L

3 N) ^9 ?) ?! ^8 i& C/ S8 \4 M$ M3 l
================================================================
) v% \! ~% R! r( D3 `     PROCESSING FILM < L3.art > ...6 R4 V( h) k! b0 p7 R
================================================================
5 x7 T! F' f" U- |3 _
$ P' l8 y, Q. V' Q& @( }) p* R9 u  FILM PARAMETERS :
) [( U' P3 c0 e8 D8 h0 u1 |% z  ---------------------------------------------------------' Z7 D: ]. U% _% h5 o) S+ g
  Undefined line width                0.005 u# e' I0 G$ N  o$ x
  Mirror code                         NONE, f, N5 b( {) U, _
  Rotate angle                        NONE
0 n% h) F/ P% m; O" n# X" s" ?  Offset x:                           0.00
" o! A8 }! \  o  Offset y:                           0.000 L4 c6 R3 h  u* Z' I1 q$ w# D
  Plot negative                       NO
: r+ R8 T% l/ Z) V# p  Suppress unconnected internal pads  NO
9 U& E8 p$ N9 Q: f" z  J/ Q$ K+ n9 U

: Z% A: d& T( |( B5 O  A; E
6 }( ^9 U! ]/ I7 N3 C  APERTURES USED:
) j/ }/ c4 @$ A' D/ i/ ?  ---------------------------------------------------------8 N0 b+ B& Z4 g' M
  TYPE       SIZE/NAME                   ROT   MIRROR MODE + q2 v0 l+ u' w7 \4 ?
  ---------------------------------------------------------
  \6 W5 _& M+ D: v  CIRCLE     0.50800                                  DARK 2 O5 G, G, J- U8 a5 m
  CIRCLE     1.01600                                  DARK
$ |, l( O. {- C2 U% u
9 u5 W8 v; F, a* T     L3 created with warnings  S2 ^* |5 r# o

( g% j& E- u. y2 B% c# j% n7 T
* }; X: t4 m$ D$ ^$ i! Q5 V+ V# N================================================================
# d9 J9 [' U  \: s7 o$ Z     PROCESSING FILM < SILKSCREEN_TOP.art > ...9 ?- }  J8 l+ a3 W
================================================================
1 t: [- D- k. q( O+ L
6 P8 [% I) n9 M. r! H  FILM PARAMETERS :
7 Y+ k: E' U" |  ---------------------------------------------------------! U. b; Z# r9 _2 r5 X3 f
  Undefined line width                0.008 m1 h. L" |- a5 }& c7 d
  Mirror code                         NONE* ]; }& n% `( x2 {
  Rotate angle                        NONE
+ K+ u2 i( y# y4 j, P$ i  Offset x:                           0.00. o! C3 ?  O6 b- y; v/ R9 M
  Offset y:                           0.00
' d7 D' s8 R" h  Plot negative                       NO4 \0 Z4 z1 _& Q# _+ |
  Suppress unconnected internal pads  NO
/ A+ m* b  U7 l. N+ h$ ^9 p* m9 z( S8 t6 t* {
, l3 ?* k" m9 P* z% ~/ d" K$ y
3 l+ _( L6 e: ~$ o
  APERTURES USED:
9 ]$ @0 F) @# |+ \2 P0 i  ---------------------------------------------------------# x- h% C. }  b6 |/ H6 y+ A6 A% q
  TYPE       SIZE/NAME                   ROT   MIRROR MODE
- Y) }7 I3 U9 T  W: M  ---------------------------------------------------------
! s( Q- u- F( a3 @  CIRCLE     0.07500                                  DARK * ?/ {5 a3 {. n8 z0 t
  CIRCLE     0.25000                                  DARK 3 p- v2 L) A! \/ S' Q9 b$ h
. S) Y+ o: q) ?# B
     SILKSCREEN_TOP created with warnings3 z6 V- u& c9 p- a) T

3 B" Z* {4 l2 Y: z; G) ?( V3 ^3 f8 k( v" `
================================================================) S/ n. X7 M% v0 N# O8 a
     PROCESSING FILM < OUTLINE.art > ...# g0 |0 D3 D9 p& I' U/ b* [
================================================================
) w; G% n$ o7 [, ~8 c4 Z! d
. Q# u! _/ i3 j  FILM PARAMETERS :9 b4 d9 n. N& o( c: Z8 n
  ---------------------------------------------------------1 {. i! c( C6 }' R
  Undefined line width                100.00: K& Z% {4 u" r5 r8 K
  Mirror code                         NONE
: ?& C0 Y* t3 j: w2 [7 b+ \  Rotate angle                        NONE
4 E5 ]0 j9 [* H# F' q  Offset x:                           0.00
+ i# ]3 q6 R$ }/ M( g  Offset y:                           0.00
; @3 M% c/ f2 i, J/ R/ ~  Plot negative                       NO7 C3 ^# B8 r- B* y
  Suppress unconnected internal pads  NO6 B4 x; u; _: M6 m, ~& h  ^& n
3 a# s1 J- W- w- c7 f4 N8 N
7 Y! x% D9 N. w% t6 d

8 F# G' Z  [5 S  x# I  APERTURES USED:
+ v% k' n, s( X  H( }$ Q) J  ---------------------------------------------------------
: p5 s& `  w% R. s+ c3 \! b  TYPE       SIZE/NAME                   ROT   MIRROR MODE
" g2 B, J5 [: I% O/ J  K  ---------------------------------------------------------
1 m7 E& P) Y; j9 u, h  O  CIRCLE     0.10000                                  DARK
  s& Q) P- y+ z2 b2 |. f+ Q* ?, j! T1 R- W% z5 B' [: f
     OUTLINE created with warnings3 V! \# i& i. \8 s" I5 G4 M  P
1 ^7 G+ e8 Q3 u. G
7 j, R' Y) ^$ c  |) W5 U6 e
------------------------------------------------------) n6 E% V: H4 O8 I* D
SUMMARY:8 |) L( ]( m( z8 j  r+ T
            L1 created with warnings3 R+ Z& b0 P! s" ^8 F7 n
            D1_2 created with warnings( t7 b5 n; [, i
            L2 created with warnings
% R1 T% C/ ^& p            D2_3 created with warnings
9 Y# Y! U. e  @! `) b. q- R# H            L3 created with warnings3 x# r! l9 E# Q) M# B
            SILKSCREEN_TOP created with warnings3 }$ R0 D* Y% _. Z0 Q
            OUTLINE created with warnings
" Z4 ^8 {, r3 X/ S3 V$ i+ g4 W; E
9 _6 G5 [  }) z% h& J ARTWORK finished; e% {0 r8 l! u2 H! @+ N" \6 w! E

下载资料威望不够？点击查看获取威望的N种方法>>
回复 支持 反对

举报

flyingc381
  • TA的每日心情
    开心
    2023-10-12 15:00

    • 签到天数: 4 天

    [LV.2]偶尔看看I
    3#
    发表于 2011-11-1 10:02 | 只看该作者
    只是warning，，问题不大* r5 P3 {$ r1 v! i  U7 T

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    piedgogo

    该用户从未签到
    4#
    发表于 2011-11-1 10:09 | 只看该作者
    对啊，只是warning，应该出片了才对。。。你看看assemble的配置有没有问题，有生成过钻孔？

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    412287724

    该用户从未签到
    5#
     楼主| 发表于 2011-11-1 11:15 | 只看该作者
    piedgogo 发表于 2011-11-1 10:09 / i6 z3 p. Y6 N8 T8 B# f4 J
    对啊，只是warning，应该出片了才对。。。你看看assemble的配置有没有问题，有生成过钻孔？
    % H7 b8 F+ `2 U' ~
    我没出那个assembly层的，因为有错误就没出，不好意思那个错误表发错了，下面这个是，麻烦您给看看，着急啊！" q. M! {% F& l: Y8 O! f" q7 ~( r( X3 Z0 e
                                                           ), ^" e, H6 \7 P5 N( M
    (        ARTWORK LOG                                         ). r% A) j8 t. j7 v6 \
    (                                                            )
    1 k9 L& r6 E# g( J, J1 J(        Drawing          : tju_10_32_2011.mcm               )/ f; B  J3 E1 P. d# ?% W
    (        Software Version : 15.51p003                        )
    # r% }# Y) V# d8 u(        Date/Time        : Tue Nov 01 11:14:07 2011         )
    % k& F5 o4 w; x(                                                            )
    5 E$ j5 n; B) c7 E(------------------------------------------------------------)
    ; P, R; k! L4 t* v, x  \
    : }0 C7 e; n9 ?. r7 z3 F# m+ \
    / X, |5 R8 v5 o) Y/ |5 L* E ---- Photoplot outline rectangle not found ... using drawing extents
    , }8 q* h  m# `- i' b) M# T4 R& L$ S* B* c

    " V4 j) X5 y5 d0 h. U" VTue Nov 01 11:14:07 2011                                Page     13 l0 f- o1 m& {; }1 Z, _" U: e
    & Q5 Z5 ^4 g$ z
    Photoplot log file
    * N: Z( K& f+ }" Y) `7 PResults from parameter file ...6 o3 E4 c7 N3 R1 u' ?
    6 q) r; M* y. P: q9 z
    DEVICE-TYPE           GERBER_RS274X
    1 p/ \) l% T4 v# ^& q( o  rOUTPUT-UNITS          MM
    2 g% o$ s5 u9 V' t+ V9 T" nFILM-SIZE             2400000 16000003 j9 s/ v0 }0 J9 Y' U( }  I
    FORMAT                5.5. V! y. r$ a6 P+ }& i
    ABORT-ON-ERROR        NO
    6 t3 r# I- m# Q) L; GSCALE                 17 X# |3 C3 [2 Y' |  B# P7 U
    SUPPRESS-LEAD-ZEROES  YES" l& @" n- b0 c0 Q
    SUPPRESS-TRAIL-ZEROES NO
    # j: ^4 y1 C- m+ N: V/ z4 hSUPPRESS-EQUAL        YES! ]( ]- z+ c) x) ?1 y, M
    UNDEF-APT-CONT        NO
    ) `9 n% E$ J5 }$ }& t% x  h5 m( J: N  Z" x; s& [$ @$ w6 Q6 Q% l. R8 T- h
    " z1 P' H6 p3 a9 b; h& {
    ================================================================
    / I( ]" C" o  T     PROCESSING FILM < Assembly.art > ...9 u1 X$ @) Z1 g+ J; N7 F; O: E' m
    ================================================================
    " u- j3 L5 `, y" b3 r: K' B1 G& |7 q+ t$ s
      FILM PARAMETERS :$ z' }5 ^; v* _; v# C+ x, h
      ---------------------------------------------------------- |3 I& @% X3 R  w
      Undefined line width                10.00% s' v" \9 R1 F& L* x) [" s, t
      Mirror code                         NONE
    3 _; h! I7 |) j& I5 t4 b  Rotate angle                        NONE+ }; J+ L& G: k7 Q; ]) q
      Offset x:                           0.00
    6 Q& m: h  J0 Z, T  n& S; @  Offset y:                           0.00- i) s% m" _4 ?2 `2 A4 _
      Plot negative                       NO0 v) B& t. Q+ n! h8 I- Y/ d
      Suppress unconnected internal pads  NO* {: v# p; D5 v( A) k( ^9 N
    9 M" I/ V5 z; K: d! X5 R% \) n- o
        WARNING: Film contains DRC error(s).! {# S! q/ ~2 R! K
        WARNING: more than one pin class in film record+ v: T8 Q. F" l
        WARNING: more than one via class in film record0 u6 t) w; [. r2 E% V) V
        WARNING: more than one etch class in film record
    - t, q4 k8 Z% h% s/ S! {    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (-58435.32 -81145.29)., j$ K% @: I5 w! W1 T8 [% J2 H' s
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (-58435.32 -78031.29).* J- e/ ?7 z  T% r4 p
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (-58435.32 -80107.29).6 v* d5 Z$ X% y! J2 q  ?7 R+ F
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (-58435.32 -79069.29).3 w" S4 B% N. T0 }9 O+ h
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (-58462.38 -76935.51).9 k4 w: L" n& Y" I1 U. U- J
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (46233.94 -21963.58).
    / C% |6 S! ^1 u! q) G# G& [$ V. k7 s    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (46233.94 -20925.58).
    9 Y% B# H$ Y6 k# z/ F$ K, w0 _    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (47271.94 -23001.58).: Z+ J: C+ C- q; Q
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (47271.94 -21963.58).+ w, s8 q: z- I2 E
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (47271.94 -20925.58).
    0 R; n" G3 q$ o3 |- q9 l    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (47255.57 -18779.28).& Y3 H+ l, {, W8 l( P8 A+ t) z
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (46220.41 -18778.28).
    " w" i; C5 C7 C( d    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (46233.94 -19887.58).
    3 ?8 k. ?' d8 b  A6 U    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (47269.10 -19888.58).% l' d1 P& O& Y) ?+ P
        WARNING: 0 width line found at (-18000.00 -33000.00)0 M* s0 f- C' j5 r
        WARNING: ... using undefined line width of 10.00& j$ r7 }1 f/ e" d" u/ [4 O2 h
    8 E0 S0 l/ z# z) D, Z
        WARNING: Multiple 0 width lines; all will be treated the same as the first.- V  V% K2 P0 j
        WARNING: ... using undefined line width of 10.00  V. {2 k5 w- v1 n
    2 z6 c5 t) o6 J! {
        WARNING: Shape at (-15900.00 -15900.00) contains void at (-1000.00 901.00)1 N& Y9 t- [/ j
            which touches another shape
    ! k& ]- J0 `2 {
    2 \% C  K: J9 |# }* ~" O) c    ERROR: aborting film - artwork will not be generated!: h, q7 F) ^1 [. l# T. v6 S
    Error in Assembly--halting output.  Artwork file not generated.
    & z, F4 Q6 ?" {5 q+ V0 j *** ERROR with Assembly
    / \0 Y( {0 m! E+ q6 l5 u; |3 r3 K麻烦看看这是哪的问题，我只要把那层的GND删除，就能出ASSEMBLY层，谢谢您的及时回复！感激不尽。

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    wangjing

    该用户从未签到
    7#
    发表于 2011-11-1 14:23 | 只看该作者
    412287724 发表于 2011-11-1 11:15 2 R9 F! A+ G: Z
    我没出那个assembly层的，因为有错误就没出，不好意思那个错误表发错了，下面这个是，麻烦您给看看，着急 ...
    1 O3 J  K( J! K& c5 B
    要不就是（-1000,901）这点，都试试

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    piedgogo

    该用户从未签到
    8#
    发表于 2011-11-1 14:46 | 只看该作者
    你的film里面加的层有相互矛盾的，看你的assemble的设置。重新添加一遍自己需要的class。

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    412287724

    该用户从未签到
    9#
     楼主| 发表于 2011-11-1 15:15 | 只看该作者
    piedgogo 发表于 2011-11-1 14:46 , R& d9 \& H1 \2 e2 {7 h
    你的film里面加的层有相互矛盾的，看你的assemble的设置。重新添加一遍自己需要的class。
    3 Z3 p0 Y2 w/ S  ]% o" U
    谢谢大家的帮助，我按照楼上的一位说的试着做了，没有奇怪的shape,还有一位说我得film里面有文件是互相矛盾，我添付的层叠结构，请帮我在看看，谢谢大家的回复，十分感谢！

    1.pdf

    101.28 KB, 下载次数: 33, 下载积分: 威望 -5

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    piedgogo

    该用户从未签到
    10#
    发表于 2011-11-1 16:43 | 只看该作者
    看了觉得好神奇。。。你这是要做什么？

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    piedgogo

    该用户从未签到
    11#
    发表于 2011-11-1 16:48 | 只看该作者
    你的assemble是给组装车间用的对不对？6 Q7 V9 u7 D1 R+ V7 k) w$ M3 ]
    那你需要给他们Placement文件和下面这样一份Gerber就好。Placement文件详细告诉他们每个元件坐标，下面这份Gerber里面有每个位置元件的标号。这样就够了。

    silk_top.jpg (53.05 KB, 下载次数: 20)

    silk_top.jpg

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    wangke851010

    该用户从未签到
    12#
    发表于 2011-11-1 16:52 | 只看该作者
    兄弟，要不发下brd文件出来（如果不怕泄密的话），你精度单位，你中途可能又设置过单位的精确度了，还有层设置都有问题，个人看法，勿生气，我试着看下能不能导出gerber。
    , H6 a. [# B. t. }( B

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    piedgogo

    该用户从未签到
    13#
    发表于 2011-11-1 16:55 | 只看该作者
    这两个不是当初做的silk层，是前两天重新给外包组装厂做的两张片子，再用CAM打印成PDF

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    kbhf518

    该用户从未签到
    14#
    发表于 2011-11-1 17:10 | 只看该作者
    好像有刷屏的意思啊！呵呵。

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    wangjing

    该用户从未签到
    15#
    发表于 2011-11-2 09:04 | 只看该作者
    412287724 发表于 2011-11-1 15:15
    & N6 q' ~' x; Q" Z0 Z/ \$ d9 J$ C8 Z0 R谢谢大家的帮助，我按照楼上的一位说的试着做了，没有奇怪的shape,还有一位说我得film里面有文件是互相矛 ...
    " J! ]' ^5 A9 R+ U; M7 G& Z
    你这太吓人了，没有这么麻烦的，via和pin都可以去掉的，只剩标号和器件的外形框就可以了。还要出一份坐标文件，通过file/export placement。

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    下一页 »
    12下一页
    返回列表 发新帖
    高级模式
    B Color Image Link Quote Code Smilies
    您需要登录后才可以回帖 登录 | 注册

    本版积分规则

    关闭

    推荐内容上一条 /1 下一条

    EDA365公众号

    关于我们|手机版|EDA365电子论坛网 ( 粤ICP备18020198号-1 )

    GMT+8, 2025-11-28 19:36 , Processed in 0.234375 second(s), 29 queries , Gzip On.

    深圳市墨知创新科技有限公司

    地址:深圳市南山区科技生态园2栋A座805 电话:19926409050

    快速回复 返回顶部 返回列表