|
|
EDA365欢迎您登录！
您需要 登录 才可以下载或查看，没有帐号？注册
x
WARNING: Since the starting (6.7322835,7.6968501)(mm) and the ending (6.7322831,7.6968504)(mm) coordinates of the arc are to close, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems.& X0 j3 l( Y2 n& X3 c# x0 {' f
3 I/ L2 g' e2 g- NWARNING: Since the starting (1.3133467,3.0012447)(mm) and the ending (1.3133473,3.0012450)(mm) coordinates of the arc are to close, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems.
; T! Q) k5 z/ P0 X' K2 n* `- W+ Q9 D" y; |
报警提示的坐标都是在原点附近的，我尝试着把原点设置到-100，-100的位置，报警的坐标也就涨到10，10的样子，不像是PCB上面的线，不知道哪边设置有问题+ f' M1 N8 n3 }9 A% [
|
|
/1 
发表于 2015-6-25 14:11
收藏
淘帖
支持！
反对！