開別人的板子鋪銅後發現下列訊息(當作沒看到嗎?)

Apple0988 · 发表于 2012-5-10 13:04

EDA365欢迎您登录！

您需要登录才可以下载或查看，没有帐号？注册

x

THERMAL RELIEF ERRORS REPORT -- 1111.pcb -- Thu May 10 13:03:30 2012

   Drilled pads with                   Nondrilled pads with
less than 100% thermal extensions    less than 100% thermal extensions

Report of Thermal Spokes Generator.

On Bottom:
                                    C102.2  (22.163, 37.973) # = 1
                                    R202.2  (28.129, 36.195) # = 1
                                    C88.2 (13.589, 37.885) # = 2
                                    D28.3 (5.683, 32.766) # = 3
                                    D29.1 (10.54, 26.035) # = 2
                                    C12.2 (47.879, 25.335) # = 2
                                    C13.2 (49.53, 18.353) # = 1
                                    C8.2 (44.388, 23.495) # = 2
                                    C78.2 (49.911, 7.301) # = 1
                                    R148.2  (19.369, 15.113) # = 2
                                    C131.2  (28.129, 37.973) # = 0
                                    C4.2 (51.181, 18.353) # = 1
                                    C6.2 (44.388, 25.527) # = 1
                                    C11.2 (44.388, 27.051) # = 1
                                    RN8.1 (49.587, 32.27) # = 2
                                    C14.2 (51.243, 21.971) # = 2
                                    C9.2 (51.181, 25.335) # = 1
CON2.15 (11.577, 50.443) # = 1
JP4.8 (50.419, 45.847) # = 0
                                    TP125.1 (61.087, 40.64) # = 3
D8.1 (58.993, 36.783) # = 3

On Top:
                                    VR13.1  (39.624, 44.134) # = 1
                                    U1.29 (51.998, 29.696) # = 0
                                    U1.34 (49.498, 29.696) # = 0
                                    C92.1 (23.876, 24.322) # = 3
                                    C103.1  (27.113, 19.05) # = 3
                                    R138.1  (31.177, 20.32) # = 1
                                    R64.2 (10.86, 19.939) # = 1
                                    VR15.1  (36.068, 44.134) # = 1
                                    RN12.4  (35.191, 20.771) # = 0
                                    U1.3 (55.223, 16.971) # = 0
                                    U1.90 (48.498, 14.246) # = 1
                                    C69.2 (19.431, 5.015) # = 2
                                    U2.13 (28.422, 37.514) # = 1
                                    C19.2 (60.325, 7.174) # = 2
                                    C21.2 (58.674, 7.047) # = 1
                                    U1.63 (39.773, 21.971) # = 0
                                    U1.58 (39.773, 24.471) # = 0
                                    U1.84 (45.498, 14.246) # = 0
                                    C31.1 (31.623, 30.923) # = 1
                                    R57.1 (31.623, 27.621) # = 1
                                    C30.1 (31.369, 36.384) # = 3
CON2.15 (11.577, 50.443) # = 1
                                    R107.2  (20.701, 12.127) # = 3
                                    VR16.1  (46.99, 44.134) # = 1
JP4.8 (50.419, 45.847) # = 1
D8.1 (58.993, 36.783) # = 3
                                    R109.2  (15.559, 4.826) # = 1
                                    R159.2  (8.571, 3.429) # = 2

Total Drilled pads: 6             Total Nondrilled pads: 43

Report of Violating Thermal Spokes Remover.

On Top:
                                    U1.90 (48.498, 14.246) # = 0
                                    U2.13 (28.422, 37.514) # = 0

小弟使用PADS 9.3
最近要改一個廠商的板子(未知版本)
打開之後沒什麼錯誤
但鋪銅後發現上列訊息
不是很看的懂

望先進給點建議