EDA365欢迎您登录！
您需要 登录 才可以下载或查看，没有帐号？注册
x
有关无刷电机的Simulink仿真的一篇论文，此论文来自瑞典一所大学的研究生论文，关于无刷电机的仿真。
+ @6 i/ f. T6 _4 N) r6 \* L1 a8 G4 Z! g; Y& [8 L( Y1 L
BLDC Motor Modelling and Control - A Matlab%/Simulink Implementation |7 o G9 J" O6 b
6 T8 h0 Z* Y: R. T2 J. }4 S% X+ i* o! U% [+ L: E T5 E1 a
Abstract& m# J; C4 _! U. A. a5 B. k* S, `
This thesis presents a model of a three phase star-connected brushless direct current (bldc) motor. The construction and operation of both conventional dc motors) g6 e7 [5 l$ s3 O3 N
and bldc motors is presented and state-space models are derived for each. Matlab@ /Simulink@ models are developed for each motor type and their validity is verified. Torque-, speed- and position control is applied using hysteresis band control, pwm control, and variable dc- link voltage control.1 _9 [. \! B0 m4 B) `
The different control strategies are tested on the bldc motor and their peRFor-mance evaluated. The frequency content of the dc link current is investigated for each control method and the impact of commutation delay and switch-ing losses is discussed. Simulations show that all the control strategies work quite well although each method has its drawbacks. The frequency spectrum of the dc-link current shows that hysteresis band control may not be suitable where load variations are large. The variable dc-link voltage method turns out to be the best solution in applications where torque ripples and switching losses must me minimized. Commutation delay is necessary in practice, but
+ ?3 s/ S! Q! Sthe simulations show that it should be kept as short as possible because it causes increased torque ripples.& U1 @, L! W7 a7 O2 j
Keywords: Brushless motors, bldc, modelling, control. T, O/ J. N% P3 e/ E4 ^) C6 j
+ U) j( _. p4 X, d6 }
* u6 M/ d) N# K
# D" F. I3 a/ l' n | 
/1 
发表于 2020-7-1 13:56
收藏
淘帖
支持！
反对！
