HFSS自带周期结构仿真入门教程

Taio · 发表于 2018-10-8 09:21

EDA365欢迎您登录！

您需要登录才可以下载或查看，没有帐号？注册

x

This Getting Started guide is written for HFSS users who are using the Floquet port feature in version 11 for the first time. This guide leads you step-by-step through creating,solving, and analyzing the results of models that use a Floquet port.

1. Introduction
Floquet Ports in HFSS . . . . . . . . . . . . . . . . . . . . 1-2
2. Antenna Array
Array antenna tutorial example . . . . . . . . . . . . . 2-2
Create the Unit Cell Model . . . . . . . . . . . . . . . . . 2-4
Assign the Master and Slave Boundaries . . . . . 2-5
Assign the Wave Port . . . . . . . . . . . . . . . . . . . 2-6
Assign the Floquet Port . . . . . . . . . . . . . . . . . . . 2-8
Create the Project Variables . . . . . . . . . . . . . . 2-10
Setup the Analysis . . . . . . . . . . . . . . . . . . . . . . . 2-11
Run Analysis and View Results . . . . . . . . . . . . . 2-12
Parametric Sweep of Scan Angle . . . . . . . . . . . 2-13
Prepare the Modes for the Parametric Sweep 2-14
Viewing the Results of the Parametric Sweep 2-17
3. Frequency Selective SuRFace Model
Frequency Selective Surface Example . . . . . . . 3-2
Create the Unit Cell Model . . . . . . . . . . . . . . . . . 3-4
Create the Rhombic Object . . . . . . . . . . . . . . . 3-4
Create the Aperture Object . . . . . . . . . . . . . . . 3-5
Move the Aperture to the Rhomboid . . . . . . . . 3-6
Assign the Master and Slave Boundaries . . . . . 3-7
Assign the Perfect E Boundary . . . . . . . . . . . . 3-9
Assign the Floquet Ports . . . . . . . . . . . . . . . . . 3-9
Setup the Analysis . . . . . . . . . . . . . . . . . . . . . . . 3-11
Setup the Sweep . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Viewing the Results . . . . . . . . . . . . . . . . . . . . . . 3-13

游客，如果您要查看本帖隐藏内容请回复