灌铜时出现如下提示，怎么改？

zxinli · 发表于 2009-4-16 19:44

EDA365欢迎您登录！

您需要登录才可以下载或查看，没有帐号？注册

x

如题：

   Drilled pads with                   Nondrilled pads with
less than 50% thermal extensions    less than 50% thermal extensions
Report of Thermal Spokes Generator.
On Bottom:
                                    C151.2  (-121.23, 6795.7) # = 1
                                    U38.3 (657.87, 6853.54) # = 0
                                    C35.2 (1812.02, 3747.48) # = 1
                                    U8.13 (2640, 4440.77) # = 1
                                    U35.36  (308.35, 5110.45) # = 1
                                    U27.9 (1126.28, 4996.87) # = 0
                                    C114.2  (-511.46, 2505.14) # = 0
虽然知道这个没什么太大影响，    但我没遇到过，请教各位大虾，是我哪里设置的不够？
谢谢！

jimmy · 发表于 2009-4-16 22:28

如题：
) s. Y8 q2 K6 s& a& k  8 n  }' ?, w! i
   Drilled pads with                   Nondrilled pads with$ ]3 P+ n* {0 `+ t5 G
less than 50% thermal extensions    less than 50% thermal extensions+ Z5 ?* M9 i! f8 K; @' R
Report of Thermal Spokes Generator.
& ~' U1 f$ Q0 p; k  F( X& dOn Bottom:2 {; v. }' a7 s7 G3 H8 f) [8 B  \
  ...
" z/ l) o1 O4 d$ O! wzxinli 发表于 2009-4-16 19:44