求助（LOGIC错误）

panchenqi · 发表于 2009-3-26 14:23

EDA365欢迎您登录！

您需要登录才可以下载或查看，没有帐号？注册

x

由LOGIC发送到LAYOUT时padsnet的错误提示如下：
Single/Zero Pin Net Warnings
----------------------------
Net ARM_D16 has less than two pins in PCB net list file.
Net ARM_D17 has less than two pins in PCB net list file.
Net ARM_D18 has less than two pins in PCB net list file.
Net ARM_D19 has less than two pins in PCB net list file.
Net ARM_D20 has less than two pins in PCB net list file.
Net ARM_D21 has less than two pins in PCB net list file.
Net ARM_D22 has less than two pins in PCB net list file.
Net ARM_D23 has less than two pins in PCB net list file.
Net ARM_D24 has less than two pins in PCB net list file.
Net ARM_D25 has less than two pins in PCB net list file.
Net ARM_D26 has less than two pins in PCB net list file.
Net ARM_D27 has less than two pins in PCB net list file.
Net ARM_D28 has less than two pins in PCB net list file.
Net ARM_D29 has less than two pins in PCB net list file.
Net ARM_D30 has less than two pins in PCB net list file.
Net ARM_D31 has less than two pins in PCB net list file.
这个是总线上的
还有个错误
Schematic Connectivity Errors
-----------------------------
Dangling Connections with a Net Name
AIN1+
AD(MAX125) X3250 Y3850
AD(MAX125) X13450 Y7550
这个可以忽略不管吗？是不是非要用ＯＦＦ　ＰＡＧＥ的方式　我是用导线悬空定义了导线网络名而已

youwenxiang_200 · 发表于 2009-3-26 14:38

总线没连接好,你要选择NET,看那个网络有没有连通

panchenqi · 发表于 2009-3-31 11:57

问题已经解决主要是自己是由PROTEL导入的元件引起的看来不能偷懒阿麻烦

帐号		自动登录	找回密码
密码			注册

求助（LOGIC错误）

EDA365欢迎您登录！

浏览过的版块

推荐内容 /1