请教：Import Logic 报错

li262925 · 发表于 2016-3-4 09:49

EDA365欢迎您登录！

您需要登录才可以下载或查看，没有帐号？注册

x

Import Logic 报错什么问题？

#1 WARNING(SPMHNI-192): Device/Symbol check warning detected.

WARNING(SPMHNI-194): Symbol 'BLANK' for device '2N6802_1_BLANK_SI2302DS_35-3390' not found in PSMPATH or must be "dbdoctor"ed.

heng_xing · 发表于 2016-3-4 10:06

库里面是不是没有这个封装

li262925 · 发表于 2016-3-4 10:28

已解决谢谢

65770096 · 发表于 2016-3-4 15:25

没有psm文件或者psm文件路径不对

Projectaker · 发表于 2016-3-5 13:30

dra psm pad 这一般的文件都需要有的。

zqy610710 · 发表于 2016-3-5 15:09

库里面是不是没有这个封装

jyl518 · 发表于 2016-3-5 17:29

没封装哇

partime · 发表于 2016-3-6 14:59

是警告，不是报错

LX0105 · 发表于 2016-4-12 12:13

#1 WARNING(SPMHNI-192): Device/Symbol check warning detected. [help]
WARNING(SPMHNI-194): Symbol 'R0402_CIR' used by RefDes R1151 for device 'RES_0402_200_0.063W_1%_SMD_V__1' not found in PSMPATH or must be "dbdoctor"ed.
#2 WARNING(SPMHNI-192): Device/Symbol check warning detected. [help]
——-————————
WARNING(SPMHNI-194): Symbol 'R0402_CIR' used by RefDes R1167 for device 'RES_0402_200_0.063W_1%_SMD_V__2' not found in PSMPATH or must be "dbdoctor"ed.
#23  WARNING(SPMHNI-192): Device/Symbol check warning detected. [help]
WARNING(SPMHNI-194): Symbol '0402_CIR' used by RefDes C1287 for device 'CAP_0402_0.1UF_16V_C0402_0.1UF_' not found in PSMPATH or must be "dbdoctor"ed.
#24  WARNING(SPMHNI-192): Device/Symbol check warning detected. [help]
WARNING(SPMHNI-194): Symbol '0402_CIR' used by RefDes C151 for device 'CAP_0402_0.01UF_16V_C0402_NI_10' not found in PSMPATH or must be "dbdoctor"ed.
#25  WARNING(SPMHNI-192): Device/Symbol check warning detected. [help]
WARNING(SPMHNI-194): Symbol 'R0402_CIR' used by RefDes R1149 for device 'RES_0402_200_0.063W_1%_SMD_V_R0' not found in PSMPATH or must be "dbdoctor"ed.
问一下，我所有0402的封装都有的。其他的0402阻容可以导入。仅上面25个。能导入，但是报错。

LX0105 · 发表于 2016-4-12 12:47

#1 WARNING(SPMHNI-192): Device/Symbol check warning detected. [help]
WARNING(SPMHNI-194): Symbol 'R0402_CIR' used by RefDes RX151 for device 'RES_0402_200_0.063W_1%_SMD_V__1' not found in PSMPATH or must be "dbdoctor"ed.
#2 WARNING(SPMHNI-192): Device/Symbol check warning detected. [help]
——-————————
WARNING(SPMHNI-194): Symbol 'R0402_CIR' used by RefDes RX167 for device 'RES_0402_200_0.063W_1%_SMD_V__2' not found in PSMPATH or must be "dbdoctor"ed.
#23  WARNING(SPMHNI-192): Device/Symbol check warning detected. [help]
WARNING(SPMHNI-194): Symbol '0402_CIR' used by RefDes CX287 for device 'CAP_0402_0.1UF_16V_C0402_0.1UF_' not found in PSMPATH or must be "dbdoctor"ed.
#24  WARNING(SPMHNI-192): Device/Symbol check warning detected. [help]
WARNING(SPMHNI-194): Symbol '0402_CIR' used by RefDes CX51 for device 'CAP_0402_0.01UF_16V_C0402_NI_10' not found in PSMPATH or must be "dbdoctor"ed.
#25  WARNING(SPMHNI-192): Device/Symbol check warning detected. [help]
WARNING(SPMHNI-194): Symbol 'R0402_CIR' used by RefDes RX149 for device 'RES_0402_200_0.063W_1%_SMD_V_R0' not found in PSMPATH or must be "dbdoctor"ed.

dzkcool · 发表于 2016-4-12 13:09

应该是封装库中缺少R0402_CIR和0402_CIR两个封装的psm文件，注意，文件名要完全一样

帐号		自动登录	找回密码
密码			注册

请教：Import Logic 报错

EDA365欢迎您登录！

浏览过的版块

推荐内容 /1