灌铜时出现如下提示，怎么改？

zxinli · 发表于 2009-4-16 19:44

EDA365欢迎您登录！

您需要登录才可以下载或查看，没有帐号？注册

x

如题：

   Drilled pads with                   Nondrilled pads with
less than 50% thermal extensions    less than 50% thermal extensions
Report of Thermal Spokes Generator.
On Bottom:
                                    C151.2  (-121.23, 6795.7) # = 1
                                    U38.3 (657.87, 6853.54) # = 0
                                    C35.2 (1812.02, 3747.48) # = 1
                                    U8.13 (2640, 4440.77) # = 1
                                    U35.36  (308.35, 5110.45) # = 1
                                    U27.9 (1126.28, 4996.87) # = 0
                                    C114.2  (-511.46, 2505.14) # = 0
虽然知道这个没什么太大影响，    但我没遇到过，请教各位大虾，是我哪里设置的不够？
谢谢！

jimmy · 发表于 2009-4-16 22:28

如题：
. ^% }1 U1 j% x& P6 F4 t  - X9 L' k, m/ q: P( S7 [- j
   Drilled pads with                   Nondrilled pads with) B$ i/ @$ w; f5 p7 E$ V
less than 50% thermal extensions    less than 50% thermal extensions
" @" w# G9 ~) b, A0 @Report of Thermal Spokes Generator.; Z' u3 I7 j' E: j: p9 ]7 z) W2 Z5 C
On Bottom:2 s: a4 M% r' v5 d0 F" a
  ...
( P" J( y, p, x. b' v* S0 Mzxinli 发表于 2009-4-16 19:44