本站微信 收藏本站 设为首页
 找回密码
 注册
关于网站域名变更的通知
EDA365电子论坛网»电子社区 › EDA工具&PCB设计 › Cadence Allegro论坛 › 求救，急，急，出光绘文件有错误
12下一页
返回列表 发新帖
查看: 5281|回复: 16
打印 上一主题 下一主题

求救，急，急，出光绘文件有错误

[复制链接]
412287724

该用户从未签到
跳转到指定楼层
1#
发表于 2011-11-1 09:01 | 只看该作者 |只看大图 回帖奖励 |倒序浏览 |阅读模式

EDA365欢迎您登录！

您需要 登录 才可以下载或查看，没有帐号？注册

x
& l# `; h! a+ c. a  ]" \1 @
/ |: Q5 e+ w3 L& S1 x( A. L
以下是我得错误表，我只要是把第2层gnd删除就能出，其它层都能正常出，就是assembly层出不了，第2层我挖了几个不规则的洞，请大家帮帮忙，看看是什么错误。
) C" l) a" t9 u5 m. p- I1 C& }(------------------------------------------------------------)
, h+ H6 U% E9 B( ~! X( e$ _( s(                                                            )  R2 d! y# w1 I; @4 c7 z5 j2 {
(        ARTWORK LOG                                         )
/ S6 h1 u+ z/ {- c) N$ x. _(                                                            )
4 j6 F7 M$ k  ~4 a9 W(        Drawing          : tju_10_31_2011pinban1.mcm        )
# n0 G- O3 a, @* o& I/ X( E, r+ F(        Software Version : 15.51p003                        )
, Z( ~! f/ e2 |3 S9 q* [9 h, V" _(        Date/Time        : Mon Oct 31 16:41:47 2011         )
7 K/ G' q, ~4 Q3 Y7 b' |3 m3 b" `(                                                            )
  \! ?4 x) h9 c6 Q7 X4 O7 m% i8 j(------------------------------------------------------------)
* g% V/ {5 e' p, u9 H: {3 P
1 D1 M9 \4 a" e3 U' S& K! [  Z+ L, ?3 ~4 ?$ o2 k6 r
' I, G2 {( u" h3 s+ p
******************************************
7 w3 I6 u$ J" J. m5 ?5 b WARNING: DRC OUT OF DATE on this layout.' Z6 j- Z. ^! ^+ l, d! r% V) Q/ P
******************************************
" Q6 r0 V. Y, x* o
* d& ?4 _* H3 Q9 V, [! }; r3 hMon Oct 31 16:41:47 2011

下载资料威望不够？点击查看获取威望的N种方法>>
回复

举报

EDA365微信号及QQ群号！
wangjing

该用户从未签到
推荐
发表于 2011-11-1 14:22 | 只看该作者
412287724 发表于 2011-11-1 11:15 / f6 U, s1 c" w# `3 V
我没出那个assembly层的，因为有错误就没出，不好意思那个错误表发错了，下面这个是，麻烦您给看看，着急 ...
; b9 g0 R  I3 Q* z0 X
应该是啥shape的问题，所有层关掉，只开boundary/art2层，找到你报错的坐标（-15900，-15900）这点，这里有多余的shape，把它删掉试试，注意不要删多了。

点评

xiaolong31624
正解  发表于 2015-10-27 13:54

下载资料威望不够？点击查看获取威望的N种方法>>
回复 支持 1 反对 0

举报

412287724

该用户从未签到
2#
 楼主| 发表于 2011-11-1 09:02 | 只看该作者
以下是我得错误表，我只要是把第2层gnd删除就能出，其它层都能正常出，就是assembly层出不了，第2层我挖了几个不规则的洞，请大家帮帮忙，看看是什么错误。
, f9 ^( P4 x/ c7 F5 o0 t(------------------------------------------------------------)! \( l5 q9 Y% Y) {7 Z# C
(                                                            )
- P: e1 M- @# d0 X4 [+ B(        ARTWORK LOG                                         )
6 G: T, q. y( ](                                                            )2 Z4 e5 G. k# J1 {5 j7 N
(        Drawing          : tju_10_31_2011pinban1.mcm        ), d7 T: H9 P% }1 u" h1 i1 ~
(        Software Version : 15.51p003                        )
/ }% r6 D. ~. ?(        Date/Time        : Mon Oct 31 16:41:47 2011         )
$ L7 A7 w) c, e(                                                            )4 N) R0 G7 Z) s# x
(------------------------------------------------------------)
  n( G! o. a3 n) S& r
% _2 f6 v. v# Q  U/ T
, t- v0 t! ?- [- B. B% b
1 F. f9 i  O8 h, V ******************************************
6 Z9 U, j. @# j; Y" ? WARNING: DRC OUT OF DATE on this layout.
4 f" r- V+ N% u0 M2 }* c/ u ******************************************) N; {3 y0 Q- V; b# v: e) h# N

3 h1 R9 R3 x9 pMon Oct 31 16:41:47 2011                                Page     17 o9 D5 l5 @7 _9 @
% [4 E7 r3 e( m( h
Photoplot log file, Y8 W" @1 p, H4 d- b7 {/ W
Results from parameter file ..., I6 r* b5 |6 p" I, K# B. s
4 @* J/ a: O: I2 B; }3 z
DEVICE-TYPE           GERBER_RS274X
* G7 _- ~) f5 _7 EOUTPUT-UNITS          MM- \1 z; ]  E+ ?
FILM-SIZE             24000 16000
0 S! K# W+ A" l* n9 mFORMAT                5.3
; v' U# @, m0 v+ ^0 vABORT-ON-ERROR        NO
! Z! F: l# S: t9 jSCALE                 16 \* ~3 d1 [' a5 X7 ?
SUPPRESS-LEAD-ZEROES  YES
5 F8 j* t# t/ k% {+ \: a3 YSUPPRESS-TRAIL-ZEROES NO
  R  Y+ P. z* h# `; e+ t+ e  H4 CSUPPRESS-EQUAL        YES" {5 v$ M: b$ m" Q* T9 T
UNDEF-APT-CONT        NO+ Y4 ~$ C; D6 a

  V& Z$ H# i" p& s" \% |  G WARNING: for raster artwork formats, artwork accuracy must be, G: p+ f$ ?( l/ r$ C
  at least one place greater than the database accuracy, up
5 D$ Y' D4 T( R: R6 g  to the maximum accuracy allowed by the selected output format.
/ S3 W% @1 J  S0 E3 S8 k) f! D9 o1 m: I/ G# U& ]+ k
  Increase the accuracy by increasing the "Decimal Places" in" f9 B, Z3 O; |: n/ n* v; K2 }
  the FORMAT section of the artwork parameters and then rerun
5 `2 ~0 s6 ?4 q4 o% S* y/ @+ O  artwork.& c4 p/ Z% D, Z( ?! {; v0 `
$ x$ x5 e( u/ R
  The current output is rounding down the data.  Failure to change
7 C" f7 W3 R( Z( ~5 q5 j  the format may result in inaccurate arc coordinates in the output
: n& ^- `& @4 x% u$ g# H1 W7 G" \  files and possible shape/void plotting failures.
1 S6 M& i" B0 j5 x7 Z" I/ B5 M7 K1 X$ d% ]; P

3 L8 @, _+ R: ^( V; f+ ^$ F================================================================9 f5 c, }8 C0 G7 r
     PROCESSING FILM < L1.art > ...
  U  v2 j7 q4 p. D9 \/ F5 l, I================================================================
+ m1 r+ e9 m( O- L& f1 U0 r& S
& x& m& T6 [# E0 }& Y, _: u  FILM PARAMETERS :! V5 [+ h$ Z9 K& W! L% ]# D1 q
  ---------------------------------------------------------
: \6 r7 ]$ R2 n- _  Undefined line width                0.00
$ h, [, r3 s: t% L3 n  Mirror code                         NONE6 Z% A8 }- U2 j" K5 N: D6 T5 q: o2 H
  Rotate angle                        NONE! @. ]2 F: }2 i9 a1 ]
  Offset x:                           0.00  S7 G# V# C+ @6 _
  Offset y:                           0.006 F( {" n* v5 p8 \: @
  Plot negative                       NO
2 j; ~2 e, b& ]9 x  n  Suppress unconnected internal pads  NO
( t2 ]: k. R0 `) D
" a4 g* K' t1 E! x: V# y% q3 c5 i. D    WARNING: Film contains DRC error(s).
7 `' \7 Y8 ?, T2 u    WARNING: 0 width line found at (-1000.00 -372000.00)8 r/ Y- A- U& t8 j, S
    WARNING: ... ignored!4 v9 Y% S9 D# ^3 s1 a0 M5 K" }! I

$ K- S7 n% Q5 O5 g    WARNING: Multiple 0 width lines; all will be treated the same as the first.6 s6 V! b$ ?# P( G1 W
    WARNING: ... ignored!/ X" y/ ^& c9 G( V( A1 M8 T3 Q
2 G3 Q8 F! ]# _5 ?% v0 S- E7 I
    WARNING: rectangle or unfilled shape composed 0 width line found at (50000.00 -424000.00)" T) I- {9 m* I9 u# Y( h  S8 H! r
    WARNING: ... ignored!- z; j$ T7 `! v9 S* ~3 ~
! m* i3 @8 e# {+ A/ D: o
    WARNING: rectangle or unfilled shape having Multiple 0 width lines; all will be treated the same as the first.$ B" @! c" D, z9 O
    WARNING: ... ignored!* o5 o" y% R% s% G
# [0 a7 [" s/ [4 v+ Z2 s
) @  S0 _8 {" N% O, Z! O

7 P# k- z# L/ _/ F- p  APERTURES USED:, N& \: a/ x2 {$ f4 C" G: R
  ---------------------------------------------------------2 F4 ^" T9 z. ~1 W
  TYPE       SIZE/NAME                   ROT   MIRROR MODE 3 b8 H0 }5 v. k3 o, ]
  ---------------------------------------------------------& o& F/ q" O$ g% ]* H' g2 v$ L
  CIRCLE     0.35560                                  DARK 4 m" K# ^6 j6 W5 X; Y! C
  CIRCLE     0.36830                                  DARK 4 |: j$ C8 |- g( u& O( B9 h
  CIRCLE     0.38100                                  DARK
; c( g5 Z$ B' a) T3 Z! q7 i  CIRCLE     0.39370                                  DARK ( x+ [! u, V8 E4 J( l7 J) p1 |3 _" n- C
  CIRCLE     0.40640                                  DARK
# _0 H/ K2 [3 U4 e* z6 p  CIRCLE     0.41910                                  DARK 9 R2 g  x4 V* O* e- h2 B, h
  CIRCLE     0.43180                                  DARK " e" g3 N1 f6 E( J* Z
  CIRCLE     0.44450                                  DARK
5 ]9 s& ?; x# w  CIRCLE     0.45720                                  DARK
! z% Q2 I" e" _1 z2 \' t, [; H  CIRCLE     0.46990                                  DARK
7 C% o* Y; r0 T; U! w! C  CIRCLE     0.48260                                  DARK + L$ t  K- y% |- {
  CIRCLE     0.49530                                  DARK / F* T8 Z2 ?' _) w/ w/ L% a
  CIRCLE     0.50800                                  DARK 2 t) U4 i5 C* j5 U3 b( T
  CIRCLE     1.01600                                  DARK 8 x8 L5 o" P5 X) Z

% Z" u$ h. u1 H( z7 D     L1 created with warnings, E  o2 S& p! d

# c0 ^9 r8 D/ ]  L; h' y+ i  u8 C* r5 m9 A4 E! G% g* E& B
================================================================
3 T' c  D+ [1 O* C4 L& N8 Q) e     PROCESSING FILM < D1_2.art > ...
0 S) V; \) [9 v' ~1 S  N. {================================================================" H- N0 h1 ]& X) l- ^+ M

) o) Q! \- E& ^) M( F  ]  c  }  FILM PARAMETERS :; u9 e3 T2 \3 G5 D7 b+ \5 t$ O
  ---------------------------------------------------------3 I: t% g; R: _  q; P& }2 h
  Undefined line width                0.00
, W% D9 _6 X. a# f  h# q  Mirror code                         NONE) n- w9 p. c* A+ X% y' ^; b
  Rotate angle                        NONE2 x) f* K- V- x) }( R6 {- Z% a2 l
  Offset x:                           0.004 C  Y$ J4 ~, H2 j9 D
  Offset y:                           0.005 w% ]; ]# A* u/ o. s
  Plot negative                       NO5 |) ^. y$ g& P
  Suppress unconnected internal pads  NO
1 L# C" Y0 ~) u* N- a
( ]/ f* ~" W; ~! [
  f1 o1 k' v( E, ^
# s! q9 h8 `: O5 D. B/ o  APERTURES USED:- k) }6 ?4 O0 S
  ---------------------------------------------------------9 f# ~: Q4 t# O0 `' _& P+ ]
  TYPE       SIZE/NAME                   ROT   MIRROR MODE - w; q/ M# K& `# U  n
  ---------------------------------------------------------
3 Y( g; e3 C+ w/ a  CIRCLE     0.25400                                  DARK $ q5 o* l' f5 t# n- ]
  CIRCLE     0.50800                                  DARK 5 o& ]2 r4 s: |

2 _1 h, ]  `4 X( ^/ O* J- D, ]     D1_2 created with warnings. u2 b. V! I5 H4 Q" ?

+ }! J. n3 X1 ~# r( h
( J( z; e9 ?5 _+ l: M================================================================
' ]1 ~$ F$ [+ v' z( {     PROCESSING FILM < L2.art > ...
8 V# D3 f* v4 E7 N================================================================
% \0 \" z! {# ?; J( d/ x8 [3 A' \1 p3 S" H- B4 l
  FILM PARAMETERS :
1 ?3 s: r, F4 }# J$ p5 }- C1 i  ---------------------------------------------------------
, c- M. m2 k8 d9 R# T/ h  Undefined line width                0.00, T4 J; F% N, p4 c- I
  Mirror code                         NONE+ d" y( O. t; N( I- _( T
  Rotate angle                        NONE
' x% w5 K$ @- `$ I  Offset x:                           0.00) K* c1 ^1 w  L
  Offset y:                           0.00
, y+ z; i6 O1 @, R  Plot negative                       NO- b, l3 p! m! U
  Suppress unconnected internal pads  NO. r9 t; a! S; U  @( O$ F
* [* r3 F* t* @8 w2 j3 }
    WARNING: Segment with same start and end points at. M2 L$ ~$ |" g- |
        (68380.01 -409974.98) will be ignored.  Increasing output+ F/ t% E; H9 v; j: M4 z. \5 `
        accuracy may allow segment to be generated.  d9 B2 [8 W! X
# M8 q3 X! Z2 V. Z
    WARNING: Segment with same start and end points at) u# ]4 l( h1 v9 Q2 h3 X% m
        (68380.01 -375974.98) will be ignored.  Increasing output
9 t% h0 n6 I4 j& A6 k5 x4 {        accuracy may allow segment to be generated.0 M8 ]% @. ?: M8 v5 _) O& a; h

3 c3 ?& z( h7 C- }, V2 Y" P* u0 }    WARNING: Segment with same start and end points at2 t% |1 S, H' e0 [& t/ I
        (68380.01 -341974.98) will be ignored.  Increasing output7 p1 `4 E& u1 w( `& H) a
        accuracy may allow segment to be generated.8 O2 M8 D4 {( Z7 Q

+ Y, K/ N# g& {& c$ H0 I    WARNING: Segment with same start and end points at
  t; I& M# X# `( y5 ~, m6 U/ h        (68380.01 -307974.98) will be ignored.  Increasing output
+ |  c* o; O* V, V        accuracy may allow segment to be generated.
  v2 c: X$ w' j8 A% B: w
5 g; \% _7 o: w. v& O    WARNING: Segment with same start and end points at. D* A+ i8 g' R; u
        (68380.01 -273974.98) will be ignored.  Increasing output. m3 ]- g7 x4 k0 Q# L+ N
        accuracy may allow segment to be generated.
! e( t2 j: w+ n" @( I! M( u5 y' e. _8 A8 G8 H+ A8 L
    WARNING: Segment with same start and end points at
0 d/ n; z* r7 {        (68380.01 -239974.98) will be ignored.  Increasing output+ T/ u' K  \# i2 U  Z- b
        accuracy may allow segment to be generated.: J) Z  {( b5 R1 E1 S9 o! g# I# o

7 @) z5 o) n! o3 [4 c, W5 J& N5 g    WARNING: Segment with same start and end points at
. N$ ?. C+ Y! j7 q8 k3 }4 K% n        (68380.01 -205974.98) will be ignored.  Increasing output( D3 l- C: l$ X0 a& P3 k( c: ]
        accuracy may allow segment to be generated.9 }" |% ?3 ]3 \$ v# ~7 q+ U
, y, E: ]) o1 t# Z
    WARNING: Segment with same start and end points at
; `4 D  U. |8 C& j        (68380.01 -171974.98) will be ignored.  Increasing output6 U8 `% B  k( o$ x
        accuracy may allow segment to be generated.
) Q9 B* X3 c0 k2 \
* Q; W& i) G4 _; s5 x    WARNING: Segment with same start and end points at
9 X, ]# w7 x$ d( N4 F        (68380.01 -137974.98) will be ignored.  Increasing output
2 R: C* V3 J- j" N9 G. \        accuracy may allow segment to be generated.
" k1 g. Z1 g# N3 c3 d. h
" ?; F; Q& ]& h    WARNING: Segment with same start and end points at) R9 t$ }7 l8 L7 v) H
        (68380.01 -103974.98) will be ignored.  Increasing output$ a% `8 d& G: x" s% {# \
        accuracy may allow segment to be generated.
8 f2 d! u9 O3 j% Z: d% n" {- m2 e9 s' x& E
    WARNING: Segment with same start and end points at8 N* s* r7 V1 G: ]2 ^7 p, m
        (68380.01 -69974.98) will be ignored.  Increasing output. h" w8 {7 B) w  @6 j$ Z% J
        accuracy may allow segment to be generated.
; W" N/ d4 m2 b/ ]9 P- a. u' t7 T; c# y+ b+ k# d3 T! e1 O
    WARNING: Segment with same start and end points at
$ d& f; W1 P) n' |& G        (68380.01 -35974.98) will be ignored.  Increasing output+ T* Y; v/ j$ q% D9 q: ?% r6 ~
        accuracy may allow segment to be generated.9 F1 f( M2 V+ z7 `# Y( d+ k
9 ]7 ~1 X# Z% k6 B; E9 |8 l
    WARNING: Segment with same start and end points at
: U; K7 I3 m. Z9 d        (68380.01 -1974.98) will be ignored.  Increasing output
. t% l+ T& T& _        accuracy may allow segment to be generated.4 c: K" h6 V& @! o( ?, x9 g

# v+ h+ V2 h% u7 s    WARNING: Segment with same start and end points at+ ?# o, C. @0 I0 f- J$ {5 G. W
        (102380.01 -409974.98) will be ignored.  Increasing output# x0 \4 b$ S& J+ k* U5 J4 P- ^
        accuracy may allow segment to be generated.
5 a4 y' ]! F5 R
# i1 U$ t# i$ t+ J1 B  c9 s$ L    WARNING: Segment with same start and end points at& Q4 M. ^# p* A6 t
        (102380.01 -375974.98) will be ignored.  Increasing output
9 a# |, Z( x" }* v# h  {7 ]! w        accuracy may allow segment to be generated.8 Q3 i& z& n  U6 S$ t
1 y% w( N7 u. j- R0 m( o
    WARNING: Segment with same start and end points at0 \/ o4 \: J1 n  V
        (102380.01 -341974.98) will be ignored.  Increasing output
$ e1 u6 x$ Y+ b        accuracy may allow segment to be generated.
$ E" K1 l+ q- \- x) G
  a; p3 F* l7 O  A/ o) @    WARNING: Segment with same start and end points at
  B' H- \& T$ F" ^4 K4 G3 X        (102380.01 -307974.98) will be ignored.  Increasing output1 S+ H+ @  E" j7 }: y5 a- }
        accuracy may allow segment to be generated.
2 A. h2 f& |8 t9 e# ]3 V' h0 _% ^$ j/ t5 p4 I
    WARNING: Segment with same start and end points at$ x7 j7 _6 \  \
        (102380.01 -273974.98) will be ignored.  Increasing output
+ c* ~$ f9 v3 y. z  N        accuracy may allow segment to be generated.9 L4 d% p' T* h1 ?" Y6 v

, J7 z/ F7 r1 D) [2 }( W) |) i    WARNING: Segment with same start and end points at
/ e; o% w3 ?3 Z: c/ x        (102380.01 -239974.98) will be ignored.  Increasing output* A# _% r" D+ \
        accuracy may allow segment to be generated.
# [( y1 j- g# h$ N# q9 D
; G* Z5 T  k, e/ X5 C    WARNING: Segment with same start and end points at0 ]9 h- V1 j) ~
        (102380.01 -205974.98) will be ignored.  Increasing output
; R. I& {- q! {( I9 ^) j        accuracy may allow segment to be generated.
. N/ v6 r/ D) ^5 D& C1 F& v" I" T. g7 w1 n( U: J
    WARNING: Segment with same start and end points at
. t  G* B# M" E# Q5 c        (102380.01 -171974.98) will be ignored.  Increasing output
$ b- X- f9 |/ B9 r        accuracy may allow segment to be generated.; ], p! O) r" r' _0 U

4 q& g  T6 g) O' C    WARNING: Segment with same start and end points at
! z" v8 ?7 M9 w' m        (102380.01 -137974.98) will be ignored.  Increasing output4 F/ I, C2 ]+ [
        accuracy may allow segment to be generated.
# [$ P6 V5 j( q' w8 A8 w7 k& `
+ m8 i0 L: t' H9 b4 g/ a" J$ R5 k    WARNING: Segment with same start and end points at
7 K5 {1 B/ L9 b0 h% Z1 F" Z3 {$ ^        (102380.01 -103974.98) will be ignored.  Increasing output
/ U# k" r3 g1 _- E4 L, I  F3 v+ S        accuracy may allow segment to be generated.' X9 a0 p& F) U" j5 _4 b
3 L8 ~, H# B9 V: N  n
    WARNING: Segment with same start and end points at
3 y( y( ^2 V6 A        (102380.01 -69974.98) will be ignored.  Increasing output; ?! v4 [- D$ M6 ~) w
        accuracy may allow segment to be generated.  q& R+ S/ i, ^8 K) p4 F6 P1 I
+ @& |* h# u( [! ~! B. V! W
    WARNING: Segment with same start and end points at1 [6 w6 c0 X5 i, ^6 Y
        (102380.01 -35974.98) will be ignored.  Increasing output
( W9 |3 h# @4 e" {2 A! M' K; K& D        accuracy may allow segment to be generated.
* D4 E$ C* s* @! m$ b  i: W9 `  b1 R! n
    WARNING: Segment with same start and end points at
- I+ N; \$ c6 G& u1 ?0 E        (102380.01 -1974.98) will be ignored.  Increasing output1 o; U7 V: j( O& {# ]  C  E! b; B
        accuracy may allow segment to be generated.5 q1 [! G+ G8 T4 g& l

4 ]2 X# U( a8 U- Y, s$ c" ~    WARNING: Segment with same start and end points at
& r% T, @% t% [/ _) i( o- }        (136380.01 -409974.98) will be ignored.  Increasing output1 r, A# g8 r3 g9 k* b/ Q: I" y
        accuracy may allow segment to be generated.8 }9 L% P" X- ~6 d0 `/ C
% p/ x) m) [+ s, r: v% A
    WARNING: Segment with same start and end points at* W: l/ j9 I. R9 [9 O* s% x! w9 u
        (136380.01 -375974.98) will be ignored.  Increasing output
5 r4 }8 Q; h5 b9 t( I        accuracy may allow segment to be generated.
/ D; M" M; p5 l
9 D) O$ O& H4 t9 r% O$ L- u' a! {    WARNING: Segment with same start and end points at2 Q, n: u, d$ _6 m* a: v
        (136380.01 -341974.98) will be ignored.  Increasing output
0 T& ]0 m0 Q8 u. h9 Z4 t* \        accuracy may allow segment to be generated.# i% ~& O+ q1 l/ e$ h3 N
$ o, o! @- L, V% d: C. S/ q
    WARNING: Segment with same start and end points at' Q/ L7 d, o( Q3 p4 u
        (136380.01 -307974.98) will be ignored.  Increasing output. \6 T( W' Y6 V6 a3 O
        accuracy may allow segment to be generated.
- L4 s5 w' L  G& h
+ L8 }& ]. G% M! i    WARNING: Segment with same start and end points at/ L( U% q( h4 k% ?- t
        (136380.01 -273974.98) will be ignored.  Increasing output
# a5 O4 ~  R) V/ i: M0 |& ^        accuracy may allow segment to be generated.- I$ H. Z6 A" I, I. j: r
2 V& K9 I4 ]$ s$ b
    WARNING: Segment with same start and end points at
' W7 d! A2 |3 Z: r8 @2 [5 [. N        (136380.01 -239974.98) will be ignored.  Increasing output1 ~8 s: I6 ^6 `) S% S! ]$ `
        accuracy may allow segment to be generated.
" F/ Y$ P9 k! I- ?! f2 {7 d; j- w3 V% Z( w& x; N& e! ]7 V( ]
    WARNING: Segment with same start and end points at
  r+ B' M8 T6 O9 ?9 C# K/ l- z( B        (136380.01 -205974.98) will be ignored.  Increasing output
1 u9 i  e* }: C1 C/ X6 S( z        accuracy may allow segment to be generated.
9 d8 H& d6 F  O! ^1 i( A4 r: I* d9 V* d
    WARNING: Segment with same start and end points at
& M& M: @7 R( i+ \/ D: `% D' ~" z; J        (136380.01 -171974.98) will be ignored.  Increasing output
3 H* Q! U) t3 G& D: U2 ]9 s        accuracy may allow segment to be generated.
, y" r) J0 q* y( B" ]
9 F5 u" G2 A# q1 l$ F' J1 i- ]    WARNING: Segment with same start and end points at
$ Q6 G0 j  [% |+ n3 W        (136380.01 -137974.98) will be ignored.  Increasing output
1 U2 v: w! O; K( k        accuracy may allow segment to be generated.
# b8 ?, {- O  K" r: ?7 q& u6 k
# I: M( p) p' J! i* P+ n    WARNING: Segment with same start and end points at
7 _$ y% M/ y5 j% D        (136380.01 -103974.98) will be ignored.  Increasing output
. x7 q" U1 K3 i, u2 g. R3 z        accuracy may allow segment to be generated.
- a( S  g: i" c2 k+ ]) f. q7 K# a. {& G8 r8 S+ Y
    WARNING: Segment with same start and end points at
) H3 j. l: a6 m$ r        (136380.01 -69974.98) will be ignored.  Increasing output
; K4 e  c3 p* A( F/ B+ S        accuracy may allow segment to be generated.
2 }. D9 G6 E) B; j/ k
& D0 N  y, c3 y7 t2 c. Y2 ?    WARNING: Segment with same start and end points at
4 P* q5 j. Z  w- [5 p& d. ~6 c/ I3 a        (136380.01 -35974.98) will be ignored.  Increasing output
4 ?1 x; x6 _0 d& h2 H        accuracy may allow segment to be generated.
- ?9 w4 s9 W! c+ c/ I3 i' ~$ C/ Y1 _: E+ h
    WARNING: Segment with same start and end points at$ H# y1 F, _8 j4 z, d) b6 `/ A
        (136380.01 -1974.98) will be ignored.  Increasing output, J# b) V% C. Z5 c
        accuracy may allow segment to be generated.
& T! z/ R6 J, S* k3 r
# a' y* M3 M/ t+ e3 I( p) [    WARNING: Segment with same start and end points at( E* X. M& Q4 H5 R; w
        (170380.01 -409974.98) will be ignored.  Increasing output
4 b- k( T  }1 [2 N8 S# @; h        accuracy may allow segment to be generated.7 g& c2 ]! ?+ q6 ~
: ]3 h1 H. |, a8 T& Q+ R
    WARNING: Segment with same start and end points at* S+ v, u/ ^3 K/ U3 j
        (170380.01 -375974.98) will be ignored.  Increasing output8 n" b* ^8 V, }8 j) Z
        accuracy may allow segment to be generated.
% v" \* z: x- f: Z" V- f4 [) v  l- k  A2 n1 ]6 X2 @" L/ |
    WARNING: Segment with same start and end points at
$ e: ~! `4 t* J: X% L; ~1 g        (170380.01 -341974.98) will be ignored.  Increasing output* ]% Q8 F6 J8 Z6 w) K& _6 o6 x
        accuracy may allow segment to be generated.
" m, U, s% I4 ?* A( [/ D9 ~; `3 P) W& z5 @+ D. q+ k4 T% k
    WARNING: Segment with same start and end points at
+ M6 f  H# g* i; v( L. `& C6 v. q        (170380.01 -307974.98) will be ignored.  Increasing output  K% F( f" E, [& V4 X
        accuracy may allow segment to be generated.+ V$ C% [: s$ Z+ x

9 d$ [/ j& C% C    WARNING: Segment with same start and end points at
* x2 F6 M/ M* Z        (170380.01 -273974.98) will be ignored.  Increasing output9 P% `/ S9 [4 w* E. }
        accuracy may allow segment to be generated.
' C% P+ h" H: I# r. R" [+ U5 S- G- k+ O! U
    WARNING: Segment with same start and end points at8 V; `* c7 h4 t
        (170380.01 -239974.98) will be ignored.  Increasing output
, o* B0 ^# w6 n9 C3 y6 t        accuracy may allow segment to be generated./ @) \8 ]& J8 G! {/ P

9 ]0 R' i5 V2 H3 Z$ j    WARNING: Segment with same start and end points at4 Q" y4 q& X+ a/ Y% Z3 k
        (170380.01 -205974.98) will be ignored.  Increasing output' l/ L2 @# w# n0 I: p6 t
        accuracy may allow segment to be generated.! r, s  B0 s; [' d2 ^
* `# G. z; y% f  s2 |6 W) k
    WARNING: Segment with same start and end points at$ |+ \( U2 O  Z# W" f
        (170380.01 -171974.98) will be ignored.  Increasing output/ K0 t/ N$ _2 F/ }: d6 o, r
        accuracy may allow segment to be generated.
" V* |! |1 d/ A$ A- U7 F$ \- `  D7 W& o7 `% P
    WARNING: Segment with same start and end points at
. f9 i  A8 S. \) j# x* Z9 p        (170380.01 -137974.98) will be ignored.  Increasing output$ b$ d8 X" B0 P0 x0 S9 l
        accuracy may allow segment to be generated.
- n( n% D8 x* J
) Z5 N; [$ F6 K7 z8 K/ a    WARNING: Segment with same start and end points at
! A  J- Q1 F: X# h# Z- g0 [        (170380.01 -103974.98) will be ignored.  Increasing output+ b) g5 ~" v" w, K# M. o
        accuracy may allow segment to be generated.
- c' r% U6 {. K7 V0 c: O. j$ ]# X) s  Y, M
    WARNING: Segment with same start and end points at
+ j! c8 l, u6 z/ s! |+ @        (170380.01 -69974.98) will be ignored.  Increasing output4 _- T8 ~% z* y6 U3 n) b' u# i
        accuracy may allow segment to be generated.
" [, E* E% M+ K) v! D% v4 k# z! E7 M$ k6 |4 _, K: T8 O
    WARNING: Segment with same start and end points at4 |; x6 K% V- S9 d
        (170380.01 -35974.98) will be ignored.  Increasing output; W  a/ M0 B( o  Z3 Z
        accuracy may allow segment to be generated.
2 Q) m, b% a- k  i9 Y/ S# }4 ]2 D9 C, T+ z/ ^& i; [
    WARNING: Segment with same start and end points at
; ~# [+ V2 c9 j! _        (170380.01 -1974.98) will be ignored.  Increasing output/ g4 [3 R+ G  j5 A9 M' _
        accuracy may allow segment to be generated.
' j& H  s6 c0 L& ~: f$ t
( B1 R* v* }0 G9 C, O    WARNING: Segment with same start and end points at
! W& L, g2 B, @- z1 Y        (204380.01 -409974.98) will be ignored.  Increasing output" T1 q  Q! h: K' n# Q3 D% ^
        accuracy may allow segment to be generated.4 K1 u4 W- p0 ^8 D) S
, P, j" i, E  [+ J: t
    WARNING: Segment with same start and end points at0 o4 P3 [/ k: T* L/ U2 q
        (204380.01 -375974.98) will be ignored.  Increasing output9 R& F3 K0 Y5 h" s
        accuracy may allow segment to be generated.# c$ d5 }! o9 a- N$ n. _

" s! e# K, g3 ~. _3 h    WARNING: Segment with same start and end points at# I8 F8 E" K8 ~$ ?/ d
        (204380.01 -341974.98) will be ignored.  Increasing output
' J) ]' M: G. d9 c& D. T        accuracy may allow segment to be generated.
1 ]: w2 b3 A& E' B, C3 E
% \* W1 S, `: i, n& V4 v    WARNING: Segment with same start and end points at- W& x. u' |) F  N  n9 O$ u5 @
        (204380.01 -307974.98) will be ignored.  Increasing output4 o# f( g! M' K7 y* O
        accuracy may allow segment to be generated.6 H6 ~" @  E; [2 L4 X

9 l1 F  F+ }/ `( S5 ^: d    WARNING: Segment with same start and end points at8 K  k2 O# N$ V7 T
        (204380.01 -273974.98) will be ignored.  Increasing output' }* ^) X, H' v9 K( I* P% V
        accuracy may allow segment to be generated.5 C: y( _4 K2 Y0 g

  {( i- G7 ]& |# q    WARNING: Segment with same start and end points at2 @0 z$ v% G3 n$ o6 q! F/ ~2 p% D
        (204380.01 -239974.98) will be ignored.  Increasing output
' L, o. t' e6 [, x0 C        accuracy may allow segment to be generated.
; \* r4 ^- Q0 W* \( y2 ~  G# U6 t9 x
" U1 @9 _" J1 P2 q( }    WARNING: Segment with same start and end points at
+ H  E' w$ L6 X* Z/ D/ L, B        (204380.01 -205974.98) will be ignored.  Increasing output
& d6 @+ d) M, Y        accuracy may allow segment to be generated." T2 `& c2 F3 Z% Y( r* n; S
+ x  h1 J. g$ Z9 J' v2 `
    WARNING: Segment with same start and end points at
: t: A8 y0 q8 o4 x4 d: b/ F        (204380.01 -171974.98) will be ignored.  Increasing output
# C5 A  z2 _/ i3 t        accuracy may allow segment to be generated.
! s- x5 g  P7 r8 I2 a1 K1 ?, G+ q8 Y; O: ?
    WARNING: Segment with same start and end points at
2 z  D1 s/ ]2 ?9 B2 o        (204380.01 -137974.98) will be ignored.  Increasing output- a% D3 `& Y' g( F% ?7 H- x" _" f
        accuracy may allow segment to be generated.' }5 e2 I9 D: u: T  C( \+ g

  q) t* e$ S- t, ~) H" x    WARNING: Segment with same start and end points at8 Y, T' U9 C( _3 r+ o
        (204380.01 -103974.98) will be ignored.  Increasing output
8 r% f' Q2 V) n( V( Y7 |9 S4 r        accuracy may allow segment to be generated.
+ Q: r* E( t' Z; v; _% [- p: X8 r, W
    WARNING: Segment with same start and end points at
$ F% n8 u9 T; o# E) j- V2 N        (204380.01 -69974.98) will be ignored.  Increasing output4 s: ~' P" s. a' {
        accuracy may allow segment to be generated./ \, k1 g% F$ t: Z

4 _% \1 I% I; R    WARNING: Segment with same start and end points at7 u  j" m5 [" \! d
        (204380.01 -35974.98) will be ignored.  Increasing output
5 e) Y' U1 @4 [$ w  ]        accuracy may allow segment to be generated.
- f) a9 g" n2 S+ C1 `2 @9 d4 X  `; C1 h7 H7 l( f
    WARNING: Segment with same start and end points at1 ^) F4 I" s0 l: S5 f; V8 k
        (204380.01 -1974.98) will be ignored.  Increasing output
! s9 r8 F8 Z8 b. S& s3 \        accuracy may allow segment to be generated.% q1 G. [7 F, Q
0 f. X* h& o  p/ F( U; j
    WARNING: Segment with same start and end points at
. ?8 q4 N7 J; P4 t+ @        (238380.01 -409974.98) will be ignored.  Increasing output
" N; r3 R$ L  W# J" [( c3 r! T        accuracy may allow segment to be generated.
3 K$ }1 y$ s1 j- Y
- ~' }! D3 u7 p5 H0 U9 g+ ?    WARNING: Segment with same start and end points at/ p9 Q) w, Z% n3 @2 p1 F
        (238380.01 -375974.98) will be ignored.  Increasing output0 d+ F1 `' g( M- u6 S
        accuracy may allow segment to be generated.
1 E) {, |$ t4 w/ L6 O; m. }" Y" R: `! D/ d6 U( d1 f
    WARNING: Segment with same start and end points at) H: m5 q* u' t0 ]* ?1 V3 M
        (238380.01 -341974.98) will be ignored.  Increasing output  [& r$ {/ ]( H0 \
        accuracy may allow segment to be generated.6 K* P- S/ s9 x% L! M7 F; o; x, o. r
, ]' d5 K- ]9 y* i
    WARNING: Segment with same start and end points at( R' b# p/ _# |7 k
        (238380.01 -307974.98) will be ignored.  Increasing output. Z. S% X5 r* S+ N; p  n5 m) u2 ]
        accuracy may allow segment to be generated.0 h- `' `: c7 B9 Z, x" o+ @0 V

8 \1 |! y& [/ O% n8 U2 f    WARNING: Segment with same start and end points at
0 C, p$ K' z2 x1 N  K$ j        (238380.01 -273974.98) will be ignored.  Increasing output. C: q9 v% M7 w  y  W4 Z
        accuracy may allow segment to be generated.
/ C$ N+ G# p0 D9 X, k  q
; S. ?3 z. y+ i2 ]    WARNING: Segment with same start and end points at* |& J+ ~# [2 O* U5 q+ d
        (238380.01 -239974.98) will be ignored.  Increasing output8 E% _$ r. f# W3 W& D
        accuracy may allow segment to be generated.+ n, o& |3 f2 Z0 q
1 X" x3 ~7 n& o3 |: I
    WARNING: Segment with same start and end points at
- F$ u' ?. f. m1 C        (238380.01 -205974.98) will be ignored.  Increasing output
* x& v+ z& ?) r8 @# M1 a( h        accuracy may allow segment to be generated.
% }& S/ l& D" V; |, A4 Q% z  k) R7 [/ i$ w2 Y$ R; z4 ]
    WARNING: Segment with same start and end points at2 w8 [; X& A% X* N
        (238380.01 -171974.98) will be ignored.  Increasing output" D4 Y# i+ e8 p; y* s0 l% k
        accuracy may allow segment to be generated.0 G; `% A* b& G5 B' l
' W8 \8 c" D0 d$ X" I
    WARNING: Segment with same start and end points at- L; |7 ?: O( Z" v  a& E
        (238380.01 -137974.98) will be ignored.  Increasing output/ _* |* g  r/ |% g
        accuracy may allow segment to be generated.
! e4 @  f% Z5 t1 e7 e6 ?8 i+ l
' T- O7 |( Z& p4 K$ H5 o  R5 U7 T    WARNING: Segment with same start and end points at
. Z/ E5 |- c9 S, G/ e        (238380.01 -103974.98) will be ignored.  Increasing output( J: `) v# {3 D$ n. t" C9 W
        accuracy may allow segment to be generated.+ n5 ?/ b# T+ Y9 f3 ^6 o
8 w: @! b3 x: _" ?# L2 ^8 q- z. J
    WARNING: Segment with same start and end points at/ @" s" R# K, y2 h6 E, A# H
        (238380.01 -69974.98) will be ignored.  Increasing output
& ^# z* ?' @6 o, J% u5 C        accuracy may allow segment to be generated." L( i3 ~5 g3 K3 }
& ?" U. p* W( h
    WARNING: Segment with same start and end points at: j! f! F: F* ~( B
        (238380.01 -35974.98) will be ignored.  Increasing output# O4 O, O  i8 L2 z3 x
        accuracy may allow segment to be generated.. V& T4 J7 O% O' ?; c4 r7 H8 T

6 _( Y4 S+ k+ E7 _( ]( |6 b    WARNING: Segment with same start and end points at; Y' o6 h* }  G) P
        (238380.01 -1974.98) will be ignored.  Increasing output" c# \, s4 t1 c2 H8 }7 c
        accuracy may allow segment to be generated.
# ^# \6 J9 v6 P8 j* U. M) e0 P- S5 h9 O* e
    WARNING: Segment with same start and end points at
/ V% l: B4 J. [% E; D2 N        (272380.01 -409974.98) will be ignored.  Increasing output
3 G' O/ S8 P, `) T2 s& t1 X. l7 e        accuracy may allow segment to be generated.
" R- w8 c; ]+ t0 K+ y1 R* @" B* V' X2 a* i5 D
    WARNING: Segment with same start and end points at
$ G/ `7 b' O- D! {        (272380.01 -375974.98) will be ignored.  Increasing output9 s+ o  d# s$ c  K& S8 c/ n0 F
        accuracy may allow segment to be generated.
5 M% p8 t4 S. t3 r- N" L
& E3 h5 d* u# n    WARNING: Segment with same start and end points at
3 f& Y2 D: o" r, y. s% y: z6 G" X2 Z        (272380.01 -341974.98) will be ignored.  Increasing output  w* N6 W/ \7 F2 b, D
        accuracy may allow segment to be generated.
1 C. M, l# r# ?' w5 @  C, N2 E( m/ M. N( n  d7 L6 H
    WARNING: Segment with same start and end points at
" X- h9 \' l  v! U$ `" ^% P        (272380.01 -307974.98) will be ignored.  Increasing output6 e3 s: ?5 U. Y# h) P
        accuracy may allow segment to be generated.& f% x1 H/ ?/ z, }

0 a* {! w* _0 M$ M& i2 _    WARNING: Segment with same start and end points at
* V3 A) h  k1 ~: G6 P% h0 k0 c        (272380.01 -273974.98) will be ignored.  Increasing output$ b8 b% n# A/ L" r6 c( b% @
        accuracy may allow segment to be generated.
7 O; O. D0 J3 x+ o. d2 V8 m+ \% E. e* _7 R/ a" P; M3 b! x
    WARNING: Segment with same start and end points at
! T% u- t* ?& Q# E        (272380.01 -239974.98) will be ignored.  Increasing output4 P/ s( L" _- R( h
        accuracy may allow segment to be generated.+ }* s/ p( N3 H: n7 G9 B$ d, t
& v+ p6 r0 |/ G( A6 N  Q  K! l* a, F" q
    WARNING: Segment with same start and end points at
4 g" m- H/ r# h# j1 Z' C0 V, p0 y: D        (272380.01 -205974.98) will be ignored.  Increasing output
, U1 X! \3 K/ e+ Z! ?5 Y        accuracy may allow segment to be generated.' {5 H6 a& J/ c( v! S
  _9 @2 X: q# c3 A, C3 v
    WARNING: Segment with same start and end points at
, D; l0 e% i- T        (272380.01 -171974.98) will be ignored.  Increasing output/ S5 L* n9 Y; a( y$ p" L7 ?" D
        accuracy may allow segment to be generated., H6 [  X) D0 @" u
! s3 V" j0 [1 }( a; W; X
    WARNING: Segment with same start and end points at
6 I+ d# V7 U1 P  Q6 M8 ?9 P        (272380.01 -137974.98) will be ignored.  Increasing output' ^" i& H! f* W! J5 U+ S, ^
        accuracy may allow segment to be generated.# D/ b' z6 W9 M( M0 \# |

' @5 Y. ]: [4 d4 f& ]/ Q8 d4 B8 \    WARNING: Segment with same start and end points at
3 u6 S7 d2 F7 y' _3 A1 p  v' {        (272380.01 -103974.98) will be ignored.  Increasing output' L. w+ B- |: s3 A# d8 _% ~
        accuracy may allow segment to be generated.
3 t0 ~6 K7 e& U0 R% C8 I& {& y* o
& o. d! p; t  d( K$ N/ N    WARNING: Segment with same start and end points at
" n1 _' c6 p4 `% y& D/ W        (272380.01 -69974.98) will be ignored.  Increasing output
: `0 u2 s$ d! p* J. j1 I3 G        accuracy may allow segment to be generated.
$ n9 V) S" i7 [6 F* k
" h9 ~0 p, h1 z& @7 j; ^; C    WARNING: Segment with same start and end points at% p3 k! j, e) F; W( m5 Z4 ]
        (272380.01 -35974.98) will be ignored.  Increasing output
. h8 n+ S: I0 g' _) X; b        accuracy may allow segment to be generated.2 Y- ^8 J2 k$ q: Z0 k6 `

4 A. t( |. A2 K1 O: b6 w  k    WARNING: Segment with same start and end points at
  @. L. ]; j1 v! ]$ i$ t) K( m  ^        (272380.01 -1974.98) will be ignored.  Increasing output
* I- d  V3 k% B3 A% T0 S        accuracy may allow segment to be generated.
& N$ r$ H! ~9 ^8 Z5 V' l: f: q5 z# p3 M5 ]5 X
    WARNING: Segment with same start and end points at
4 }3 C* u9 a) E& e; W, Z( m& m        (306380.01 -409974.98) will be ignored.  Increasing output
* X5 c- e' u% J0 V) A* k& ?& I        accuracy may allow segment to be generated.4 R* x: l2 W+ Z5 m5 E7 Z% k
8 W3 Z1 g, z( F8 `4 m! J
    WARNING: Segment with same start and end points at
5 g6 s* M0 R' p& G        (306380.01 -375974.98) will be ignored.  Increasing output
! b* J" [7 \- b. q" Y        accuracy may allow segment to be generated.2 e6 r% K( x/ w* M3 M
! [' X# q+ a6 {0 y0 p" I
    WARNING: Segment with same start and end points at' o2 I4 A, i  B5 |
        (306380.01 -341974.98) will be ignored.  Increasing output
$ u; ]8 E0 U5 i& ]        accuracy may allow segment to be generated.
0 t5 z4 P2 E6 T7 ^4 v0 q' L
% @4 d- C8 `' R    WARNING: Segment with same start and end points at. j1 c9 \/ j) s* r
        (306380.01 -307974.98) will be ignored.  Increasing output/ {, W, x$ r+ b# x, b9 f
        accuracy may allow segment to be generated.
4 p% V5 D) W* r* W/ ], W  A8 R# O% U
    WARNING: Segment with same start and end points at+ I6 M# O; N# c. b
        (306380.01 -273974.98) will be ignored.  Increasing output& |2 o) U+ G9 M7 l8 J
        accuracy may allow segment to be generated.
' O0 T( p: u# s3 ~( f
3 E8 a% `/ y$ ^) J' J    WARNING: Segment with same start and end points at
2 I* u) e. E; e7 @3 l        (306380.01 -239974.98) will be ignored.  Increasing output& k) c9 f0 _( o! c1 _1 _
        accuracy may allow segment to be generated.
+ _2 f* B' B' O0 c2 p$ T3 Q" j; l5 J) A9 b  Q! H
    WARNING: Segment with same start and end points at
% G  U- T# P, H* I! C5 `% q' t/ J        (306380.01 -205974.98) will be ignored.  Increasing output
& L* Y1 T9 f& I  t# E1 V        accuracy may allow segment to be generated.$ W% o8 m8 j: t
# A- g7 ?( ~  X5 W( ?- s
    WARNING: Segment with same start and end points at! y3 k2 E5 G* m& n" P7 ~
        (306380.01 -171974.98) will be ignored.  Increasing output
# |: d+ h# G# |( |+ C( q5 j        accuracy may allow segment to be generated./ S  m1 O8 }9 Z$ s( o  q0 }/ v

$ _, L6 J0 k4 Q' K( k    WARNING: Segment with same start and end points at7 n1 Q, {7 x8 K( L
        (306380.01 -137974.98) will be ignored.  Increasing output) q* s' C( x) ^7 r
        accuracy may allow segment to be generated.
5 ]' j# b" d3 A# L* e
9 e% S4 |4 w. s$ I) ~7 B6 l    WARNING: Segment with same start and end points at+ Y# S& M" c3 e) i7 F
        (306380.01 -103974.98) will be ignored.  Increasing output+ r) G8 m$ d9 n* K6 \
        accuracy may allow segment to be generated.! F9 n* c) X2 ^+ K: T

8 ^$ O+ h% E" y" G9 r, C) W& q    WARNING: Segment with same start and end points at2 q" ~; ?# S9 b9 w; M6 Z
        (306380.01 -69974.98) will be ignored.  Increasing output
* A% @% M. l/ r2 O; w        accuracy may allow segment to be generated.
; w  V. v$ v% _7 U  K0 r4 b4 X5 ?- Z6 o3 l( H
    WARNING: Segment with same start and end points at6 L) m, h# I# J. u3 u
        (306380.01 -35974.98) will be ignored.  Increasing output
% M( b2 ^0 n1 _& p        accuracy may allow segment to be generated.
: K; y6 G7 c6 n3 C- `
8 z, K8 Q! C  I    WARNING: Segment with same start and end points at
2 [5 Y7 T! e8 H9 k0 N        (306380.01 -1974.98) will be ignored.  Increasing output" A6 C+ @/ @6 \" {0 L  R( R% r
        accuracy may allow segment to be generated.& l! _8 @  {  L: m( h

! y. x2 E  Z, n& t' S$ k, c3 D    WARNING: Segment with same start and end points at
, r4 F9 d+ X" v3 n  s        (340380.01 -409974.98) will be ignored.  Increasing output7 A$ d& u: u  S3 M& x
        accuracy may allow segment to be generated.! X3 U2 {( k: n- K/ Y
$ X/ l5 n2 ]( J' l% F
    WARNING: Segment with same start and end points at/ w) ~# D6 o+ P
        (340380.01 -375974.98) will be ignored.  Increasing output5 \! y! a2 N$ H; @: J
        accuracy may allow segment to be generated.
) u% O; O- ?+ d0 D! J' p# v  t% o
    WARNING: Segment with same start and end points at8 c7 X+ k7 b. e$ k$ _- C9 N
        (340380.01 -341974.98) will be ignored.  Increasing output
- b5 Z$ N$ u* f3 O  S/ V) b2 M8 Q        accuracy may allow segment to be generated.6 c( s/ C- T2 R% k2 ?
3 e! W1 I& v3 [  U* w
    WARNING: Segment with same start and end points at
6 s0 z5 ~9 D2 L) b7 h+ u4 t        (340380.01 -307974.98) will be ignored.  Increasing output
! K: q0 t. B5 x        accuracy may allow segment to be generated.; w/ v% l! ~7 n% U/ e) y5 k" T

2 C3 S1 o& j9 j( ~- b9 o- U    WARNING: Segment with same start and end points at) r. s/ F8 m5 J
        (340380.01 -273974.98) will be ignored.  Increasing output( R& }& }' e( m" L0 x
        accuracy may allow segment to be generated.
8 R4 M! e5 h3 m4 Z+ T! M, ^1 m9 V
( t7 Y& c5 a) u5 J! m& M, Q    WARNING: Segment with same start and end points at3 ~  I8 V9 K" a# x# K  r) j* w$ Y
        (340380.01 -239974.98) will be ignored.  Increasing output3 M" m+ R6 ?; R$ [6 q8 ]  V
        accuracy may allow segment to be generated.  X0 T# V) _3 S0 x# D( O* c
% o3 W8 |2 \2 S. L
    WARNING: Segment with same start and end points at! ?, O2 z8 T, ~- p
        (340380.01 -205974.98) will be ignored.  Increasing output% W  y' I0 A3 k7 F6 f  W& o. T4 \/ D
        accuracy may allow segment to be generated.
$ `: `4 r8 H4 y  W5 [4 n0 Z& p4 g  M( _& q1 b( o% c
    WARNING: Segment with same start and end points at
. l# T8 F# f+ B        (340380.01 -171974.98) will be ignored.  Increasing output
$ n# E8 V9 P& {# a& u3 z0 [        accuracy may allow segment to be generated.
5 O7 C% \1 K6 u0 P6 o7 }$ ?4 Y6 ?' t6 w" z/ g/ ]
    WARNING: Segment with same start and end points at- ?8 c; @6 ^& j8 [& n
        (340380.01 -137974.98) will be ignored.  Increasing output5 I, A/ K( V: E
        accuracy may allow segment to be generated.8 I9 j4 c% F/ L& ]4 e: t2 F1 H

8 X4 e8 X. c0 w/ C; e) x    WARNING: Segment with same start and end points at
( Q2 O" }8 m! \; H- o/ f2 E        (340380.01 -103974.98) will be ignored.  Increasing output$ f" V* j0 D% O, @' d
        accuracy may allow segment to be generated.
/ K' X+ w. [7 P* f3 _/ z1 |( t+ a! h5 w  m& c- f
    WARNING: Segment with same start and end points at
6 H0 }( C+ q' F( p% r( E/ h5 }        (340380.01 -69974.98) will be ignored.  Increasing output* V! V: k9 r4 F/ G" U, L; V3 q  B
        accuracy may allow segment to be generated.+ f. L) g' B( x" k& I" x
) d5 m' B0 c$ I; A4 Z0 l
    WARNING: Segment with same start and end points at3 T( c# G9 d2 H
        (340380.01 -35974.98) will be ignored.  Increasing output
* x  M$ W: t) d# J& J        accuracy may allow segment to be generated.( P/ u" i+ }* W7 C5 ~
, x/ f  V% @  V, E+ |
    WARNING: Segment with same start and end points at, Y: g$ Q+ S7 |  t" Y
        (340380.01 -1974.98) will be ignored.  Increasing output
5 \$ R- X- L) {/ R0 V$ @        accuracy may allow segment to be generated.  o  M; O3 Z$ x( O: S
  o3 y1 s2 b2 \) ]5 ~
    WARNING: Segment with same start and end points at4 m# F! j: Z& w( L! A$ G. M9 h5 n
        (374380.01 -409974.98) will be ignored.  Increasing output7 Q2 w. u, j4 e! H
        accuracy may allow segment to be generated.! c$ f! Z, f0 v& U% D0 d  \) r# w
; n9 R* D8 X1 X# T9 q, h9 d
    WARNING: Segment with same start and end points at! k$ S6 p8 f0 @& Y' C* Z; V
        (374380.01 -375974.98) will be ignored.  Increasing output( _0 U' n& Z3 h  G' f9 m
        accuracy may allow segment to be generated.
9 N- s5 b5 R! q2 d6 E9 m
* q. \+ b* s; v- f3 o- ^    WARNING: Segment with same start and end points at
" ?- K! b' V! l        (374380.01 -341974.98) will be ignored.  Increasing output
" [' H2 f* R1 o& C% |9 b        accuracy may allow segment to be generated.
1 |" w* M- r( z+ M( l" E' b) {; @
    WARNING: Segment with same start and end points at
: i& z! s7 S& \) y) q$ Q. N        (374380.01 -307974.98) will be ignored.  Increasing output
0 y" {# Z; M$ j" r0 i        accuracy may allow segment to be generated.
* b4 x1 D0 t$ \$ v* M" r4 k/ L: v7 N+ B( m
    WARNING: Segment with same start and end points at
; w5 J- S% Z8 C  W: A        (374380.01 -273974.98) will be ignored.  Increasing output: j; w# J, B' g
        accuracy may allow segment to be generated.
' n3 S: [4 K$ X+ V' N, ^
! A: D/ x/ Z  O2 J2 Y    WARNING: Segment with same start and end points at
( y* N1 \- N7 y2 l# S5 s( q+ h        (374380.01 -239974.98) will be ignored.  Increasing output
+ e9 `% d+ X7 a1 g. K$ y9 l4 t; h$ Z        accuracy may allow segment to be generated.+ w/ l5 Z) D8 q7 [
! ]' b: A. }" g7 \
    WARNING: Segment with same start and end points at
' u5 }+ |/ ^6 O) z- q9 Z+ [: y        (374380.01 -205974.98) will be ignored.  Increasing output0 E/ [7 X1 o3 Y/ M
        accuracy may allow segment to be generated.
6 _2 d9 [1 q2 [  z; {( F
* `! n9 s+ n/ [6 T1 P; z    WARNING: Segment with same start and end points at
5 T' i2 w' e3 K' w        (374380.01 -171974.98) will be ignored.  Increasing output
8 Q9 {( x. k5 F& \/ i6 m# b7 B: n" R" T        accuracy may allow segment to be generated.( r; }, S' `/ L: E
' _2 P1 K) @" u# Q: B
    WARNING: Segment with same start and end points at4 O( D: g( {8 n# ~
        (374380.01 -137974.98) will be ignored.  Increasing output1 b  ]9 O, B- Z
        accuracy may allow segment to be generated.
# |) f; W: |8 N& p9 F: G
5 m3 h/ y  h6 N% f% Y    WARNING: Segment with same start and end points at
% }1 D! h/ R" {: l8 m8 E        (374380.01 -103974.98) will be ignored.  Increasing output5 P9 o3 n% K+ z. e* O5 Y
        accuracy may allow segment to be generated.4 W! {: q% l% M2 Q, k9 Q0 x

3 k3 J8 I( y/ D( L! o2 H3 z    WARNING: Segment with same start and end points at
/ S+ |- ^3 X5 K* H5 b        (374380.01 -69974.98) will be ignored.  Increasing output
. V3 A) L: A6 {& ]' k  k        accuracy may allow segment to be generated.- g! ^2 d0 y4 B
# `5 e$ q0 E; ]1 Y0 e' W% e/ Y
    WARNING: Segment with same start and end points at' n0 m$ {9 P& U
        (374380.01 -35974.98) will be ignored.  Increasing output9 ~5 F- C% a: d3 G! R
        accuracy may allow segment to be generated.
$ ]8 [4 }9 h" c; I
0 u2 ~& y8 \) m    WARNING: Segment with same start and end points at
  S- X4 [3 }6 q6 a$ y7 \" P7 \        (374380.01 -1974.98) will be ignored.  Increasing output
5 r2 @3 B4 h  e        accuracy may allow segment to be generated.! A6 m4 Z7 I1 o; v5 ]2 E

9 {! Y  V  ^4 {( V2 {) s7 {    WARNING: Segment with same start and end points at
: |2 L' p9 }4 d! U/ g( G- [        (408380.01 -409974.98) will be ignored.  Increasing output
8 X) L% g8 r$ c7 \4 o: J        accuracy may allow segment to be generated.
0 @; A( R1 a( Z% m% n6 o! m6 [, Q* C$ D' L
    WARNING: Segment with same start and end points at1 i" I* E* I; K8 ~( l$ k
        (408380.01 -375974.98) will be ignored.  Increasing output
& J8 b. E% h& A0 k3 I$ b! L7 S        accuracy may allow segment to be generated.8 ~" n% M" O. @. S8 }8 B7 P6 T

5 Z/ _, W% k+ \, Y/ t& M6 {    WARNING: Segment with same start and end points at
: R% j! f& c& t& g6 o; G        (408380.01 -341974.98) will be ignored.  Increasing output- i/ d% N- _8 u+ j8 i
        accuracy may allow segment to be generated.
& g# D3 E9 U2 f# Z! b" w0 |! o& ^0 U$ p) R
    WARNING: Segment with same start and end points at; L! o- b- @4 R, ?; Y- q
        (408380.01 -307974.98) will be ignored.  Increasing output
; k, }# B6 X' F& J# T! a& h) u        accuracy may allow segment to be generated.
" n+ J4 C$ x/ z4 u" k5 \% P* l* A6 F5 a) C! X* x6 P& u/ g
    WARNING: Segment with same start and end points at
; Z2 \* X! h& {5 \1 x        (408380.01 -273974.98) will be ignored.  Increasing output
9 @9 \6 T3 [: r9 [+ k. X5 A        accuracy may allow segment to be generated.% T; `- b- `6 p- D8 y+ L  B  w* u+ j

/ `* A$ u0 n" o* {( {5 ~    WARNING: Segment with same start and end points at
! [) V% a+ }/ j, p" `# F        (408380.01 -239974.98) will be ignored.  Increasing output4 o3 r4 I& k0 X
        accuracy may allow segment to be generated.
- r0 }; }0 y* L" E/ p; Q
7 {1 k  S/ Q! W0 z$ S4 \    WARNING: Segment with same start and end points at
/ r5 J5 l4 M7 I( u! ]/ o# u* y        (408380.01 -205974.98) will be ignored.  Increasing output* ]) y: \* g" i1 l8 {
        accuracy may allow segment to be generated.
) S# X, V9 a. `7 g: a5 D
# I* A: Y% J8 c. b/ M' O5 I    WARNING: Segment with same start and end points at$ f& R) G( @+ `1 Q! n/ X2 \5 o; c
        (408380.01 -171974.98) will be ignored.  Increasing output
7 Y/ R: B' N. j4 c        accuracy may allow segment to be generated.
3 C$ K9 H1 g( j0 F" h; j! F  z
" [- K- @5 R  {& ^5 \8 L: O    WARNING: Segment with same start and end points at) O9 j/ `" I+ o: B* a
        (408380.01 -137974.98) will be ignored.  Increasing output
7 o* v5 v8 J6 B4 B        accuracy may allow segment to be generated.% z4 t, E8 p; s3 H; m& d. n! S0 x
8 V6 Y! X0 K/ A0 J
    WARNING: Segment with same start and end points at8 o! e7 y9 K0 H# D0 s" a
        (408380.01 -103974.98) will be ignored.  Increasing output& c2 |  J; Q1 Z5 _
        accuracy may allow segment to be generated.4 U! j9 h) a6 _: G

- Z  _+ p5 j' Z7 ]. r9 Y$ x    WARNING: Segment with same start and end points at
5 J1 O" S6 o7 w- d+ |+ ?* ~0 G! G6 @8 {6 Y        (408380.01 -69974.98) will be ignored.  Increasing output
# `8 T- b. c0 q8 W        accuracy may allow segment to be generated.9 g0 a! g) \. _6 u1 m% B
9 a3 }/ w! }$ k
    WARNING: Segment with same start and end points at
" Z6 e/ V$ p! X! |        (408380.01 -35974.98) will be ignored.  Increasing output
" M4 a. m+ G; w6 T* L' D) c8 Z) i* X. a        accuracy may allow segment to be generated.
4 B2 y* w: t2 E2 g/ C
" X  Y" |$ T7 L) H" a" N    WARNING: Segment with same start and end points at( |9 J. j+ j0 D) L
        (408380.01 -1974.98) will be ignored.  Increasing output
+ u( J' s1 X" }7 M        accuracy may allow segment to be generated.2 z- F% ~% p6 ]  [+ X: P/ ]

# l4 E# Q5 _$ a" ~    WARNING: Segment with same start and end points at
- g# \. i( |  B6 i        (442380.01 -409974.98) will be ignored.  Increasing output* J+ d2 Q8 |$ K1 w! [% u
        accuracy may allow segment to be generated.( b" E$ x) z" n. h' u

- O: O; |/ X2 b+ z    WARNING: Segment with same start and end points at8 v/ Y. ~  j) A
        (442380.01 -375974.98) will be ignored.  Increasing output! [4 r3 q  m- h+ j
        accuracy may allow segment to be generated.
/ {  R9 n) Z% v! I0 Y
! D* i' X+ b- X, }& k6 h5 @( a$ W    WARNING: Segment with same start and end points at
$ h4 s  q$ W5 B/ O* m8 D9 H$ e4 k& M6 H        (442380.01 -341974.98) will be ignored.  Increasing output
5 z3 M) m0 S- w' U' o0 s2 w        accuracy may allow segment to be generated.
) L( D( m- {0 T6 @8 w
' R: J+ c+ P9 ~0 Y. S4 `8 _    WARNING: Segment with same start and end points at
0 N2 `8 D+ j3 }$ {$ U) u6 e$ P        (442380.01 -307974.98) will be ignored.  Increasing output: w+ s, k) Y7 h6 z7 x% J
        accuracy may allow segment to be generated.
& ?/ C! Q  m2 }2 J6 ^7 M2 J3 K. r6 C% R) k( [
    WARNING: Segment with same start and end points at' J% ~* H( [4 Q. L0 u
        (442380.01 -273974.98) will be ignored.  Increasing output0 j, W; D3 Z0 ]' ?" D
        accuracy may allow segment to be generated.% ]3 Y5 j2 `9 m/ _
1 \. E3 j% [' Z. G
    WARNING: Segment with same start and end points at
+ @2 X# V& l% |. x& h        (442380.01 -239974.98) will be ignored.  Increasing output
0 q! H0 r4 S3 K( M        accuracy may allow segment to be generated.
* q4 N: J) v8 u1 P2 ]8 o2 F/ ^: j. R# N4 r1 n1 D
    WARNING: Segment with same start and end points at
9 B- @% Z0 ^: R! i; Y        (442380.01 -205974.98) will be ignored.  Increasing output  U2 j( l2 i4 b4 e( r: |
        accuracy may allow segment to be generated.
* w/ f  q7 Y( m/ z7 _9 v
6 B% V- L& l" h    WARNING: Segment with same start and end points at
% J+ B! p# F" M0 c, z7 X7 p        (442380.01 -171974.98) will be ignored.  Increasing output
- V% Q/ S9 X% a        accuracy may allow segment to be generated.
. ~* K/ t2 \' i1 [
! c( x0 p# R6 P9 {; J2 l* M    WARNING: Segment with same start and end points at; l8 n6 }' T) m) K9 y- q
        (442380.01 -137974.98) will be ignored.  Increasing output
) B: c/ U1 i! \; e# o/ A' X3 X: Y        accuracy may allow segment to be generated.4 L6 D+ B- n2 y! m( a0 z& `. o/ o

3 S4 |7 B: {8 k. ^  _: T    WARNING: Segment with same start and end points at
3 L/ ]( Y. Y+ I9 l        (442380.01 -103974.98) will be ignored.  Increasing output
# J  j; l7 I7 C1 j  k7 Y* Z0 e        accuracy may allow segment to be generated.
& }% Z" P, r; W$ x/ \/ v4 s( ~! ~% J" P: B1 b& B
    WARNING: Segment with same start and end points at
. j6 P6 ^- O& {/ ^+ t4 c3 _* O        (442380.01 -69974.98) will be ignored.  Increasing output
# h$ L' [- |0 ~! W4 F        accuracy may allow segment to be generated.: p8 I& ]) R$ {2 t1 O' J! ]' b

6 H" |3 `. P) z, \! U; N$ j( }  K
$ p1 O7 K" J- P, v3 e& a# I
. }3 K1 f! {4 @+ u  N) g  APERTURES USED:
; @6 g2 U% v; W6 R  ---------------------------------------------------------0 j2 s  ~2 m3 m9 s1 V: `+ S3 P
  TYPE       SIZE/NAME                   ROT   MIRROR MODE
1 u! q* O$ ~# B4 Q2 t  ---------------------------------------------------------
/ W; I8 N7 @8 d6 d& ?4 E7 P! g  CIRCLE     0.50800                                  DARK 1 D; n2 ~) O( m
  CIRCLE     1.01600                                  DARK : y6 w4 D5 u; J: J

5 m7 [3 a- v" k  g: }     L2 created with warnings) \4 w2 h4 P, @0 {0 h+ n
4 x% K  D. I1 o  {2 F

+ }# Y) D( e  ^5 Z================================================================
7 E& H' p) q9 ]1 X  ^, s     PROCESSING FILM < D2_3.art > ...
# S, d$ o% Y8 x( O. Y================================================================
% @6 k" ^& P" ]- t& W, V& o
) y; c5 N! |! E; m  FILM PARAMETERS :
2 P! k# d: i+ B& Q* d- j/ C  ---------------------------------------------------------
/ }0 k) w2 E( e$ }) S, s" d. x0 O  Undefined line width                0.00- }; @6 b  H8 y: h) t4 g
  Mirror code                         NONE
+ g6 f0 p/ H# {' M$ J) O5 s: e0 e+ y( ]  Rotate angle                        NONE
6 n" F7 j9 N6 T- L: W  Offset x:                           0.00+ Z  O/ A( i0 ?. t- U8 R
  Offset y:                           0.00
, E# L) O% \/ _- f: t* A; Z  Plot negative                       NO/ P' |. Q8 ~2 E. f
  Suppress unconnected internal pads  NO# R! A4 m6 M7 q4 X
* y' i+ m' @) {

: M2 Z: @( K1 b2 x! B, @
' q1 u" s. y- G' j  APERTURES USED:" m/ [- q7 r4 g2 ^2 _. f; u
  ---------------------------------------------------------2 \8 v& ]; ^6 f; m) w9 N, t
  TYPE       SIZE/NAME                   ROT   MIRROR MODE 4 U- c- {6 M( J5 V* A: B2 n- D- ^
  ---------------------------------------------------------5 I+ V. Q$ e0 }  F4 _7 @% w6 d
  CIRCLE     0.25400                                  DARK * H# Z4 Q$ y' Q$ q" k
  CIRCLE     0.50800                                  DARK 0 ?1 k. e; [5 ?* S% W

' {; D: V0 \3 J. W" g6 ]2 p; {! V     D2_3 created with warnings3 w# W) B% R7 e3 L) m2 `  @  u. m

' w; A! O/ E! f" b% _  ^: w, C) z
9 S& v+ z2 A: g" w. F5 F================================================================
, {. @9 y0 V! a; a$ O9 L     PROCESSING FILM < L3.art > ...
5 H) E/ n- M* d7 ]* n' c' y================================================================& O! }! m! l, @6 ]9 A/ ^' k; H
* C$ |: {8 v9 N( G0 x1 f% F
  FILM PARAMETERS :# u, o, d# C0 V$ j  x
  ---------------------------------------------------------
; N  O9 I" W) P1 N1 F; B3 n* }' L  Undefined line width                0.00
, H) R1 O2 T! i$ D  Mirror code                         NONE- B1 E  T; Y) w
  Rotate angle                        NONE
6 B/ r) J9 ^8 u, f. v0 q  Offset x:                           0.007 m- I* g& x% \: ~" v. k$ s
  Offset y:                           0.00( [  ]- F1 u( |8 s
  Plot negative                       NO# s8 x0 u0 @; d+ ~) q4 q
  Suppress unconnected internal pads  NO
+ X: W) ^$ R5 O# _& O8 w& K0 u7 s$ S' }1 A/ s; L

; Y9 {/ l& y& M$ U8 z
+ ^2 x: C% Z* K* t$ |: n3 S  APERTURES USED:( V" G7 C$ T( @
  ---------------------------------------------------------) U3 ~& J: {. K; Y, z2 }" k
  TYPE       SIZE/NAME                   ROT   MIRROR MODE
& N, [" H1 G/ T3 y" l  ---------------------------------------------------------
' L- s4 `( Q. L8 [1 s1 x/ a. G  CIRCLE     0.50800                                  DARK
- c9 j3 P0 S" z& {0 ~( X+ n  CIRCLE     1.01600                                  DARK
2 ]  f. ^+ I' X: P" r3 l
; U2 c9 m/ @, R; w     L3 created with warnings
- Q* D; C, _' F0 z% j" v5 S. d( c# b8 q: g+ F, V7 E

; V) h, {* }) x================================================================
7 s# D* t, j7 c% h& G     PROCESSING FILM < SILKSCREEN_TOP.art > ...
: b4 V: z) M# F7 T9 A4 E================================================================: f  C7 x" M0 n. {' d. ], @
1 g  T) z- X. l" ^$ h) D; a
  FILM PARAMETERS :' T, }# D1 m. J8 L$ m+ z3 [* F5 _
  ---------------------------------------------------------
/ X& X* n* X, |0 ~! S1 x" p  Undefined line width                0.00
) A9 i7 ?6 r* F/ z  Mirror code                         NONE
6 a/ h8 M1 z& O  Rotate angle                        NONE) T: ]2 I6 J7 V5 b5 A/ V; g* v
  Offset x:                           0.00
1 ]5 u3 i$ _( D! Z# W4 m* W  Offset y:                           0.00
' g# @/ ?( M9 N, s  Plot negative                       NO0 Z1 C3 N7 {( A5 J
  Suppress unconnected internal pads  NO' ^: Z' j" j" O, T, y
1 q7 C. r2 H1 g

2 v* M  X1 N* P
! O/ Q% i: U9 V5 m$ `  APERTURES USED:
( u6 \, A' U' [5 D  i  ---------------------------------------------------------
$ k: q/ B% n) a. U. M! N  TYPE       SIZE/NAME                   ROT   MIRROR MODE
( ]& d. `& K8 T( |( a( I& m  ---------------------------------------------------------
9 ~+ u+ y+ p. j: a! s2 f  CIRCLE     0.07500                                  DARK
9 k+ M# O; M$ ^# F( c0 |  CIRCLE     0.25000                                  DARK
: b+ |) S- H- K* q  l8 D
! M5 D, K7 w+ X     SILKSCREEN_TOP created with warnings
) x: ~4 v1 H8 a3 [- p; O4 k1 r) x

# K  B5 d7 @8 F2 C4 q  I================================================================
+ m  W. I$ _& b' ^2 d2 w. v8 G9 L& h* `     PROCESSING FILM < OUTLINE.art > ...
* x4 Q8 ?, ^5 H6 W2 X% A: ?& _! W================================================================3 _, U; j: y& P& X2 h

+ \& w1 R% F3 y+ K! X% o  FILM PARAMETERS :/ L* D; ]7 S7 T, {' U5 q
  ---------------------------------------------------------' T2 @: ^, t5 L  A8 a/ x) H
  Undefined line width                100.00
) M2 Y* E+ Q0 v) n  Mirror code                         NONE
7 w# G# O" y- t1 e" s: J1 d0 T, p  Rotate angle                        NONE
7 X0 b5 }  N3 G9 u  Offset x:                           0.00
/ f/ ~# |8 x/ u/ e% y# _" Y  Offset y:                           0.00
7 g8 D/ J# l0 Z% w  p  Plot negative                       NO
2 H2 F5 j. l5 ]+ x0 m5 J  S  Suppress unconnected internal pads  NO9 s8 \* H, x! T7 a9 P0 }
* ?3 Q: b: G( A* U& E

& G/ Y. a" s8 h% }4 M0 O9 @' P
* K: [6 x% X( Q. C/ @1 h% H  APERTURES USED:
% e8 m9 E# Y) W" \4 v  I8 ~1 \+ y  ---------------------------------------------------------
7 X' c4 J, O; v+ o" H  TYPE       SIZE/NAME                   ROT   MIRROR MODE $ o1 c& `5 t; T8 e  F
  ---------------------------------------------------------
( F9 @( A% ]- m, c6 p! q  CIRCLE     0.10000                                  DARK & w2 N4 G9 X2 a& B8 O, t$ J# r
' a, l: V& E0 Y- K- Z9 K: l
     OUTLINE created with warnings
2 K) T2 E4 c. S4 T& c0 E2 k. o
( V3 s) l, m* y' i" _
& V+ B* }% Y5 l5 ], h; V------------------------------------------------------. H# q+ s. B- n) k! U5 e6 `
SUMMARY:
1 {: |# |0 d4 G# b1 M" \7 i            L1 created with warnings. F, R) E1 @3 u. K
            D1_2 created with warnings1 S& B7 X1 a7 V% Q
            L2 created with warnings& a$ ]: }! C1 a0 I9 q5 X% K
            D2_3 created with warnings/ K) W" ^0 M) u3 H+ ~% X  ?6 I
            L3 created with warnings
" B4 [1 F2 Z/ w2 n1 p            SILKSCREEN_TOP created with warnings7 C9 y5 J5 V8 F4 e5 E& V: j) {5 a
            OUTLINE created with warnings# o6 ]  \, O( X) M
! ^7 [, H0 j5 ]$ s# e  X* S6 t; p
ARTWORK finished1 g# k$ ^- G4 j) G' h1 x. M- B

下载资料威望不够？点击查看获取威望的N种方法>>
回复 支持 反对

举报

flyingc381
  • TA的每日心情
    开心
    2023-10-12 15:00

    • 签到天数: 4 天

    [LV.2]偶尔看看I
    3#
    发表于 2011-11-1 10:02 | 只看该作者
    只是warning，，问题不大/ W; Z4 v) s# W0 |1 ?8 E" z

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    piedgogo

    该用户从未签到
    4#
    发表于 2011-11-1 10:09 | 只看该作者
    对啊，只是warning，应该出片了才对。。。你看看assemble的配置有没有问题，有生成过钻孔？

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    412287724

    该用户从未签到
    5#
     楼主| 发表于 2011-11-1 11:15 | 只看该作者
    piedgogo 发表于 2011-11-1 10:09 $ |# p2 h9 |4 v9 }5 ]
    对啊，只是warning，应该出片了才对。。。你看看assemble的配置有没有问题，有生成过钻孔？

    4 B+ ^, s0 L" J) T/ n; a# ^! X我没出那个assembly层的，因为有错误就没出，不好意思那个错误表发错了，下面这个是，麻烦您给看看，着急啊！
    7 G* Q% b2 @5 g' Q6 O3 V0 S                                                       )% U. @9 u6 [1 G% S4 H9 G
    (        ARTWORK LOG                                         )+ Y; Q  {- [, v8 S
    (                                                            ): n" z0 X. c/ X' i
    (        Drawing          : tju_10_32_2011.mcm               )" {/ ~' T' L+ |  o) Y# A$ N7 S
    (        Software Version : 15.51p003                        )8 J! C  G- S: Q# D2 p
    (        Date/Time        : Tue Nov 01 11:14:07 2011         )
    * \2 E, f+ `2 D2 W(                                                            )
    , t3 T1 N- v5 n(------------------------------------------------------------)  r( ?* l* o* W. B6 `

    ( {( p( m7 t( s3 r- {* M% W2 A) n) U7 N7 y8 ?) ]
    ---- Photoplot outline rectangle not found ... using drawing extents
    & B: K9 r5 B, b, P
    # h8 {! g( _$ d0 ?; `+ T0 f
    / I% }5 q. z- ]& ~$ M' u7 E5 sTue Nov 01 11:14:07 2011                                Page     1
    # q0 C% K: a, P# R% K+ ?' y
    & i2 e, o* N) [' |: {& @. OPhotoplot log file7 O5 R7 ^6 Z6 _8 S+ k
    Results from parameter file ...4 n0 @( S+ M; T; g& e8 |& U

    0 F& w% L$ o: {$ h% r# C$ VDEVICE-TYPE           GERBER_RS274X1 s" ^& {" s: @) ~
    OUTPUT-UNITS          MM
    , J9 {# E& V* [* o# N, _FILM-SIZE             2400000 1600000
    / A% s1 x1 ?  d+ Q" O1 l) `FORMAT                5.5
    % M% z5 d9 p) f! t8 y4 a0 q+ TABORT-ON-ERROR        NO
    1 C' S1 Y" w4 {( k( W$ ^" CSCALE                 1! h# R/ }5 W2 D
    SUPPRESS-LEAD-ZEROES  YES# u9 W, k3 s2 O! d% ]9 T( R
    SUPPRESS-TRAIL-ZEROES NO
    # p" i! v1 z2 s! o) ]) I( bSUPPRESS-EQUAL        YES( Z* x" u( \/ I+ Z6 a! m
    UNDEF-APT-CONT        NO: F6 p" S* r) U8 {& l% ?, S
    : J9 N! o2 {; g( W' [6 o. h

    $ [2 a/ r' Z: {& Y# D' @================================================================
    1 J$ r+ Z& W3 Q" ?! `     PROCESSING FILM < Assembly.art > ...5 _7 T5 W- f+ K: Q/ L0 N
    ================================================================
    " g  h& i1 Y* c/ O6 C5 M4 `2 d1 n5 d% X9 N' v
      FILM PARAMETERS :* j4 e$ ?: m) B; b
      ---------------------------------------------------------
    , |) c) I$ B: ]: D5 q  z  Undefined line width                10.001 E/ Q  O6 A( c
      Mirror code                         NONE
    0 C" g! k( U, O5 h' J, C5 k  Rotate angle                        NONE
    0 _3 x3 _4 k2 q7 J% J  Offset x:                           0.00" |# V; ]& t# i! }. ^4 Q
      Offset y:                           0.00
    : z1 K. |& d4 M: `( r  Plot negative                       NO$ C% l* N& m: Z$ ~
      Suppress unconnected internal pads  NO
    / V6 S3 V; [* d9 j: r- _* X" p7 U
    % x2 H2 b! }. Q    WARNING: Film contains DRC error(s)./ r2 w- E  W# `  ]& ]
        WARNING: more than one pin class in film record) Z+ y5 Y/ D0 t) q$ v9 `
        WARNING: more than one via class in film record
    + A5 \1 V- F7 i7 ?7 O. f    WARNING: more than one etch class in film record4 `# D) T5 c3 N
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (-58435.32 -81145.29).
    + `. e& e' _  [% b! w  {    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (-58435.32 -78031.29).4 b  p% l# e7 j
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (-58435.32 -80107.29).0 u7 T- B: Q( F& o
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (-58435.32 -79069.29).1 P% {5 X0 b- U; M0 ~6 z. X
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (-58462.38 -76935.51).
    4 F$ R9 v2 x) u8 @    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (46233.94 -21963.58).
    # L8 ?  y+ ]9 ]    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (46233.94 -20925.58).
    2 @0 B! d8 e8 o! H    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (47271.94 -23001.58).: i. K4 a9 c) O
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (47271.94 -21963.58)., P* m! X9 Q( j$ p- q# p1 J
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (47271.94 -20925.58).
    " B; c7 _& Z5 K% Z; b    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (47255.57 -18779.28).
    4 d5 K& ]! I- L5 \    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (46220.41 -18778.28).5 g( k" {& h/ ]. I
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (46233.94 -19887.58)./ O* ?1 j+ [( j8 n' f& t7 _( x
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (47269.10 -19888.58)., Q( h: h$ _% G1 e3 e" k+ `2 z
        WARNING: 0 width line found at (-18000.00 -33000.00)
    , m) {- S' ]. a' B; e    WARNING: ... using undefined line width of 10.00
    9 S1 E. _' b5 A9 U+ R9 U% v3 _0 T. V6 h% v  y
        WARNING: Multiple 0 width lines; all will be treated the same as the first.3 ]0 x3 |' |# a$ M( p! o
        WARNING: ... using undefined line width of 10.00: P) |/ G$ o6 d1 u+ [9 Q

    % w3 ^  z/ G+ F- X7 w    WARNING: Shape at (-15900.00 -15900.00) contains void at (-1000.00 901.00)1 A& ^6 E  }: ~* f$ ~# c
            which touches another shape
    " y5 e" ]+ s: C0 J) `* Z) M9 \. K  Z+ Q1 ]8 B* j
        ERROR: aborting film - artwork will not be generated!5 d. f; h+ b/ S5 m6 e
    Error in Assembly--halting output.  Artwork file not generated.7 P6 n) W7 p; V, a* U" g
    *** ERROR with Assembly
    ; ^- ~' L6 I6 ]7 Z2 q麻烦看看这是哪的问题，我只要把那层的GND删除，就能出ASSEMBLY层，谢谢您的及时回复！感激不尽。

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    wangjing

    该用户从未签到
    7#
    发表于 2011-11-1 14:23 | 只看该作者
    412287724 发表于 2011-11-1 11:15 ! R  k6 R+ u' j3 Z. Q7 q/ T
    我没出那个assembly层的，因为有错误就没出，不好意思那个错误表发错了，下面这个是，麻烦您给看看，着急 ...
    , t8 Q4 V2 ?% k6 Y9 L% n' F
    要不就是（-1000,901）这点，都试试

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    piedgogo

    该用户从未签到
    8#
    发表于 2011-11-1 14:46 | 只看该作者
    你的film里面加的层有相互矛盾的，看你的assemble的设置。重新添加一遍自己需要的class。

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    412287724

    该用户从未签到
    9#
     楼主| 发表于 2011-11-1 15:15 | 只看该作者
    piedgogo 发表于 2011-11-1 14:46 # Q- X* B. F7 m6 A
    你的film里面加的层有相互矛盾的，看你的assemble的设置。重新添加一遍自己需要的class。

    6 t9 x& S' J+ ]+ e" s& Q3 z/ q- |9 q% Z谢谢大家的帮助，我按照楼上的一位说的试着做了，没有奇怪的shape,还有一位说我得film里面有文件是互相矛盾，我添付的层叠结构，请帮我在看看，谢谢大家的回复，十分感谢！

    1.pdf

    101.28 KB, 下载次数: 33, 下载积分: 威望 -5

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    piedgogo

    该用户从未签到
    10#
    发表于 2011-11-1 16:43 | 只看该作者
    看了觉得好神奇。。。你这是要做什么？

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    piedgogo

    该用户从未签到
    11#
    发表于 2011-11-1 16:48 | 只看该作者
    你的assemble是给组装车间用的对不对？
    3 F" g+ w0 D0 f: i3 E那你需要给他们Placement文件和下面这样一份Gerber就好。Placement文件详细告诉他们每个元件坐标，下面这份Gerber里面有每个位置元件的标号。这样就够了。

    silk_top.jpg (53.05 KB, 下载次数: 16)

    silk_top.jpg

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    wangke851010

    该用户从未签到
    12#
    发表于 2011-11-1 16:52 | 只看该作者
    兄弟，要不发下brd文件出来（如果不怕泄密的话），你精度单位，你中途可能又设置过单位的精确度了，还有层设置都有问题，个人看法，勿生气，我试着看下能不能导出gerber。
    ( ?. k# r3 _3 n5 M' A

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    piedgogo

    该用户从未签到
    13#
    发表于 2011-11-1 16:55 | 只看该作者
    这两个不是当初做的silk层，是前两天重新给外包组装厂做的两张片子，再用CAM打印成PDF

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    kbhf518

    该用户从未签到
    14#
    发表于 2011-11-1 17:10 | 只看该作者
    好像有刷屏的意思啊！呵呵。

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    wangjing

    该用户从未签到
    15#
    发表于 2011-11-2 09:04 | 只看该作者
    412287724 发表于 2011-11-1 15:15 ( {/ z# }+ D6 ]  ~) S% j
    谢谢大家的帮助，我按照楼上的一位说的试着做了，没有奇怪的shape,还有一位说我得film里面有文件是互相矛 ...
    ) I3 ^4 C5 y, V1 z% g+ x/ h( S- g
    你这太吓人了，没有这么麻烦的，via和pin都可以去掉的，只剩标号和器件的外形框就可以了。还要出一份坐标文件，通过file/export placement。

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    下一页 »
    12下一页
    返回列表 发新帖
    高级模式
    B Color Image Link Quote Code Smilies
    您需要登录后才可以回帖 登录 | 注册

    本版积分规则

    关闭

    推荐内容上一条 /1 下一条

    EDA365公众号

    关于我们|手机版|EDA365电子论坛网 ( 粤ICP备18020198号-1 )

    GMT+8, 2025-11-28 17:06 , Processed in 0.203125 second(s), 30 queries , Gzip On.

    深圳市墨知创新科技有限公司

    地址:深圳市南山区科技生态园2栋A座805 电话:19926409050

    快速回复 返回顶部 返回列表