EDA365电子论坛网»电子社区 › EDA工具&PCB设计 › Cadence Allegro论坛 › Cadence Allegro教程资料区 › 光绘导入CAM350报错问题的解决方法：Apertures are used ...

光绘导入CAM350报错问题的解决方法：Apertures are used which have a size of 0

查看数: 19215 | 评论数: 154 | 收藏 4

关灯 | 提示：支持键盘翻页<-左右->

帖子模式

這侽孓譙悴丶

发布时间: 2019-8-7 11:21

正文摘要:

replyreload += ',' + 1520969; 本帖最后由這侽孓譙悴丶于 2019-8-9 17:23 编辑 | O' f, O0 `2 D1 r9 i6 j + }" p" P+ k' _( N# C+ I' R 游客，如果您要查看本帖隐藏内容请回复0 g4 M0 w ...

jotaro 发表于 2023-1-13 11:31

CAM350 tool number with no size :291492536 system has assigned a default size of 32.0 mil to all tools.Correct this information using NC Editor Tool Table/ ~

bingshuihuo 发表于 2020-9-20 23:16

CAM350 tool number with no size :291492536 system has assigned a default size of 32.0 mil to all tools.Correct this information using NC Editor Tool Table

yimiYP01 发表于 2020-9-9 10:09

CAM350 tool number with no size :291492536 system has assigned a default size of 32.0 mil to all tools.Correct this information using NC Editor Tool Table

Dc202507254a 发表于 2025-7-25 08:34