本站微信 收藏本站 设为首页
 找回密码
 注册
关于网站域名变更的通知
EDA365电子论坛网»电子社区 › EDA工具&PCB设计 › Cadence Allegro论坛 › 求救，急，急，出光绘文件有错误
12下一页
返回列表 发新帖
查看: 5284|回复: 16
打印 上一主题 下一主题

求救，急，急，出光绘文件有错误

[复制链接]
412287724

该用户从未签到
跳转到指定楼层
1#
发表于 2011-11-1 09:01 | 只看该作者 |只看大图 回帖奖励 |倒序浏览 |阅读模式

EDA365欢迎您登录！

您需要 登录 才可以下载或查看，没有帐号？注册

x
* i0 {# d# I/ k7 M! D2 l2 j

, O/ f& l! M7 f0 R- m以下是我得错误表，我只要是把第2层gnd删除就能出，其它层都能正常出，就是assembly层出不了，第2层我挖了几个不规则的洞，请大家帮帮忙，看看是什么错误。* O+ W7 P+ Y, N8 |
(------------------------------------------------------------)
7 [8 Y/ C" i( ?, k/ T(                                                            )
% C- Z7 c5 T& d(        ARTWORK LOG                                         ). D0 Z8 G# K3 A: M4 |- B. R
(                                                            )4 Q+ r$ V' ?3 t; E: y' u
(        Drawing          : tju_10_31_2011pinban1.mcm        )
/ t: ?# F2 m# l. V7 S, b8 r(        Software Version : 15.51p003                        )) S0 V  p: _( y. F' p  d
(        Date/Time        : Mon Oct 31 16:41:47 2011         )
, C; M% _& V' ], J8 s(                                                            )
: O5 A. S! j. L+ L% ]: M(------------------------------------------------------------)( F# u4 T( N  a2 _+ U; x

5 j7 z0 N9 m/ d5 h
% }* S. F" G: w
; l5 v! |& O: L, B ******************************************/ m9 d% w% A  ~! F1 c3 }% E/ `
WARNING: DRC OUT OF DATE on this layout.
! d" Y2 M' E) C  y9 R ******************************************$ L" [" W$ G" R) P9 p, _6 e% V

: |. k7 G9 n8 r, G& ^0 W) d( R! bMon Oct 31 16:41:47 2011

下载资料威望不够？点击查看获取威望的N种方法>>
回复

举报

EDA365微信号及QQ群号！
wangjing

该用户从未签到
推荐
发表于 2011-11-1 14:22 | 只看该作者
412287724 发表于 2011-11-1 11:15 . U1 m4 ~' _8 |! n+ ^9 Z0 m4 w
我没出那个assembly层的，因为有错误就没出，不好意思那个错误表发错了，下面这个是，麻烦您给看看，着急 ...
1 q7 K* i! Y" S, Z& Q5 V+ }
应该是啥shape的问题，所有层关掉，只开boundary/art2层，找到你报错的坐标（-15900，-15900）这点，这里有多余的shape，把它删掉试试，注意不要删多了。

点评

xiaolong31624
正解  发表于 2015-10-27 13:54

下载资料威望不够？点击查看获取威望的N种方法>>
回复 支持 1 反对 0

举报

412287724

该用户从未签到
2#
 楼主| 发表于 2011-11-1 09:02 | 只看该作者
以下是我得错误表，我只要是把第2层gnd删除就能出，其它层都能正常出，就是assembly层出不了，第2层我挖了几个不规则的洞，请大家帮帮忙，看看是什么错误。8 k0 H* v3 o2 T# w: j5 H; ]' j2 Z1 a/ o
(------------------------------------------------------------)  ]+ W8 E1 s# ]$ U
(                                                            )
8 M2 [( r4 p& E0 \. Q  i1 c(        ARTWORK LOG                                         )
0 X) \* N# C* p& ~(                                                            )
8 j$ F# j- y- s, P3 {(        Drawing          : tju_10_31_2011pinban1.mcm        )
1 m3 o* I0 Z# p' d(        Software Version : 15.51p003                        )
0 w8 @' p6 i' E6 Q(        Date/Time        : Mon Oct 31 16:41:47 2011         )3 w4 P9 O* N1 A, J0 {8 N1 V6 n
(                                                            )9 Z% o% G0 s# k1 W( v6 n% A
(------------------------------------------------------------)- ]! v2 [+ ~1 l$ l$ g

$ n$ i& Z3 `$ v$ V# J& z# J2 H* K7 r7 \& T* \2 [

9 K0 n2 B7 p1 B ******************************************
/ B; v8 w& \, l% ] WARNING: DRC OUT OF DATE on this layout.
6 G. O* k  w7 l: [) r* a ******************************************9 T- {4 V/ G# m! T" M
2 B$ p8 {3 F$ ]5 Y/ U% M
Mon Oct 31 16:41:47 2011                                Page     1
& r" y+ D; R) a" E& ^: n$ I8 `+ }! Y" y, G# q% }& x$ X: a# f
Photoplot log file
" o0 P! c, N+ C; Y9 GResults from parameter file ...
& L4 }: H- E  J$ p' I. a$ Y) }8 _) P
DEVICE-TYPE           GERBER_RS274X8 ~( @2 `+ e3 o0 M
OUTPUT-UNITS          MM7 \4 W; V" I/ M
FILM-SIZE             24000 16000( I6 h# z( r8 k1 U7 J/ ?$ a
FORMAT                5.3
/ z3 p3 C) E1 v0 p4 uABORT-ON-ERROR        NO: Z  a) }4 f* J' |) F1 n
SCALE                 1* U9 J: a- ]5 I7 A# e, A% o
SUPPRESS-LEAD-ZEROES  YES
: g* e9 Q! v0 k$ A9 z4 I2 d9 L4 V' _/ nSUPPRESS-TRAIL-ZEROES NO
0 \- r  z/ z, f$ W% a, F- zSUPPRESS-EQUAL        YES
3 t: ?4 b: @! c* E7 t# yUNDEF-APT-CONT        NO$ ~3 b7 B9 y3 |* L7 N" [/ K- G- Y
; `! H- ?4 y$ z/ _8 U4 }+ I
WARNING: for raster artwork formats, artwork accuracy must be
3 C/ f$ x. Z) {) H9 C  at least one place greater than the database accuracy, up" p" {  }; T* @: J* _8 w$ r
  to the maximum accuracy allowed by the selected output format.
. g- V" X) z4 B4 u
0 k  P  I! o+ A3 T, F  Increase the accuracy by increasing the "Decimal Places" in/ b, |1 H; E( \( z
  the FORMAT section of the artwork parameters and then rerun
& I) o) g* j! q# u% C  C% K9 p  artwork.
. g  Y  s4 j9 Z" j
' {: V' D1 n# Y( S  K1 Y  The current output is rounding down the data.  Failure to change
+ G7 l5 C# [5 a& `1 M5 k- e/ F  the format may result in inaccurate arc coordinates in the output$ r" ], b2 K5 z9 s
  files and possible shape/void plotting failures.3 j: j: C% v+ H  K

% @. }" I' s8 ~- ^
  _4 G5 ?. i; E- D, M7 I================================================================4 [( O$ O+ f: w; @% S  l$ A
     PROCESSING FILM < L1.art > ...- c* k" ?' j* K8 s! h' ]! c
================================================================9 p4 }! j& d( t3 |. U  `5 `
; V: i0 K: t. s( {$ ^/ E
  FILM PARAMETERS :" @0 b2 |( I* |  j0 x. P6 q+ K, J
  ---------------------------------------------------------: n* f/ T. B( y6 Z1 H5 R
  Undefined line width                0.00# P) @/ a' E" c/ v. E% g  T4 a* I
  Mirror code                         NONE3 i2 R0 ~/ L- }9 ]& F5 [
  Rotate angle                        NONE
. F/ V# z& S6 Q5 v  Offset x:                           0.00# ~# h6 b( ]& R  D7 q
  Offset y:                           0.00+ F/ R, L5 w0 l0 G; b  b* \
  Plot negative                       NO
; b% c3 g" [% R4 L  Suppress unconnected internal pads  NO
- [0 [# ~& e( l  S4 k
1 p0 N3 \1 A+ m. P    WARNING: Film contains DRC error(s).
! H# Z/ }! P8 V- {6 M; \    WARNING: 0 width line found at (-1000.00 -372000.00)3 z) t3 H( o& f1 a* M1 j
    WARNING: ... ignored!
$ v/ a( O/ ?3 X7 n7 o
4 n. @0 U. i, l. `3 X  e- ^9 J    WARNING: Multiple 0 width lines; all will be treated the same as the first.
4 E4 X3 {, k" }, R- b    WARNING: ... ignored!
7 w8 Q; ^! \; e4 h9 S$ L" G" v* w$ \" K1 D. q$ i
    WARNING: rectangle or unfilled shape composed 0 width line found at (50000.00 -424000.00)# [7 h3 d' U( k9 p
    WARNING: ... ignored!
, K/ ~7 u5 |2 P) A, g- G& {% g* ?; S+ c7 n
    WARNING: rectangle or unfilled shape having Multiple 0 width lines; all will be treated the same as the first.
7 ]2 t9 C+ E) {9 ~: r! }( T    WARNING: ... ignored!+ J5 |* p/ U. H, w8 W* p+ v
8 t7 @: y$ n. d
6 E. z; C/ x* p

) v. o+ y9 H( n# M( O  APERTURES USED:$ f9 h8 r( X9 t1 V0 |6 K
  ---------------------------------------------------------
* Q, v& L  B1 h% V9 ]8 l4 M- l  TYPE       SIZE/NAME                   ROT   MIRROR MODE 3 ]- f# A( Y$ H) K0 j+ w
  ---------------------------------------------------------/ Z% ^. ~! W( r, I- W  \
  CIRCLE     0.35560                                  DARK
, J6 f; K5 s* Q4 x" M0 o9 p  CIRCLE     0.36830                                  DARK
2 C' l0 \1 p  Q  CIRCLE     0.38100                                  DARK
2 q8 X3 m( j- I( b! Z" {) Z: A  x  CIRCLE     0.39370                                  DARK / R6 n; t) R, y1 j
  CIRCLE     0.40640                                  DARK 8 [/ E9 b0 G3 R) a; I
  CIRCLE     0.41910                                  DARK
4 J. n3 E; c3 l& o  CIRCLE     0.43180                                  DARK
! ^( c) L# T/ d" W/ j7 v: |  CIRCLE     0.44450                                  DARK
3 o! ?( E% f/ X" y  CIRCLE     0.45720                                  DARK ) }! m; m9 N" i, _
  CIRCLE     0.46990                                  DARK ( Y% w1 ]. H2 r- x$ Z" N
  CIRCLE     0.48260                                  DARK
6 q: b! q( y1 b+ E8 u  CIRCLE     0.49530                                  DARK 8 e; W5 N# b" M0 ~' y0 O
  CIRCLE     0.50800                                  DARK 2 Z; Y4 @1 u% B, g" T- c
  CIRCLE     1.01600                                  DARK % T/ F( G& i6 V8 M8 s

5 P; N6 f7 ?& V! E2 K     L1 created with warnings
- u8 ]: K" v, F  l9 o  W' c
% A3 [/ ?: E9 Z1 E
8 d- m- N! i6 k6 S================================================================
, y% ]  n& Z3 O, ]2 F* E5 P     PROCESSING FILM < D1_2.art > ...( q  w3 `& U) P+ W3 ]6 y4 T- `
================================================================1 y$ }3 c) V1 }# [: n

/ B! K) ^" [: Z  r  FILM PARAMETERS :
  |1 P. M# M: h& A5 I- _2 G  ---------------------------------------------------------
4 j7 S6 ~& h( v3 N: H! A0 ~- d/ P  Undefined line width                0.00
7 k. E) l* J& ~3 p) ^  Mirror code                         NONE. K, i% H3 W% D9 f" n
  Rotate angle                        NONE
3 }5 R; S) J: C# v! R8 Z  Offset x:                           0.00
# i/ Y& e$ p! P. E% n  W  d- U# f  Offset y:                           0.00+ R8 `( X2 q* o; [
  Plot negative                       NO9 h5 I$ h8 N1 o5 S
  Suppress unconnected internal pads  NO
7 {' t! _5 _  [+ a' H( M) Z6 v, Z( N

3 C3 o7 G) ~& g. k$ E: m* C0 E/ o" X, \0 L! u' y
  APERTURES USED:
% Q9 ?. i7 }% v  ---------------------------------------------------------
9 O. r5 a" d* Y: J: ?$ h& `  TYPE       SIZE/NAME                   ROT   MIRROR MODE
) M& G: K: v9 j4 V) M% g  ---------------------------------------------------------$ s9 _3 t, f% [1 M2 l2 D  Z- A/ V
  CIRCLE     0.25400                                  DARK ( x3 r& O8 n( O8 s' Y$ ~5 Q
  CIRCLE     0.50800                                  DARK   V. o1 C$ U0 Z1 l3 J! k
4 P! x9 G4 g# \1 h
     D1_2 created with warnings2 y; o9 Y0 t8 y8 x; T
5 V0 U* h# P( ?6 n

9 r) e. t  W3 r================================================================; l& r& o  R# _) F; a+ H& t
     PROCESSING FILM < L2.art > ...3 o- \/ J: `7 y
================================================================
7 k* y) m0 n3 _7 u) v& H* c5 C& _) J4 Q9 f
  FILM PARAMETERS :
; a# n/ p. J' ?1 _7 S  ---------------------------------------------------------
* L8 h0 }8 o3 e* V: X  Undefined line width                0.00
9 r6 {2 |7 \/ l  Mirror code                         NONE! q: v( b# D+ Z* u' W+ z8 p1 L
  Rotate angle                        NONE% Y$ i+ z: m; i5 h; z2 j
  Offset x:                           0.00
7 a) [+ p; T) V- r$ q  Offset y:                           0.00& H$ I+ x& T7 q" g: F! n( `8 G! _
  Plot negative                       NO) z- t* Y  B; M: t" c
  Suppress unconnected internal pads  NO
% L$ b$ B! W) |  ]4 U* ^7 {: {) @# |% v1 ^
    WARNING: Segment with same start and end points at7 B8 L/ D1 x4 u+ d+ J
        (68380.01 -409974.98) will be ignored.  Increasing output& ]# x- w+ q$ x6 b0 K8 J, j+ X  @8 e
        accuracy may allow segment to be generated.
. X$ I( p# R: O$ Y) _+ A! F7 W% _- I3 @
    WARNING: Segment with same start and end points at
9 f: j( A3 L+ H9 H" f. ?( i& D        (68380.01 -375974.98) will be ignored.  Increasing output0 ]$ a+ D3 G5 A
        accuracy may allow segment to be generated.
- j' K9 H7 B  j7 L* V- o3 I' D) s. J. W% q4 x
    WARNING: Segment with same start and end points at
! [) f# a$ w3 @# d) ~3 ?        (68380.01 -341974.98) will be ignored.  Increasing output
$ s+ R1 l" W2 G5 Z        accuracy may allow segment to be generated.8 m7 l9 y' D; u$ K  L9 d2 h& d
% ^, d9 h$ s7 V1 O6 ]
    WARNING: Segment with same start and end points at
; B) e" h2 \5 |        (68380.01 -307974.98) will be ignored.  Increasing output/ h" d7 J: ]4 H4 g5 W
        accuracy may allow segment to be generated.8 T  K& k4 z& B) X

8 }5 X- f& ^8 S4 L- L0 v8 O    WARNING: Segment with same start and end points at+ Y4 t; ~* W! A0 Y. Z! g3 c$ s
        (68380.01 -273974.98) will be ignored.  Increasing output5 z4 d: z4 i: Q
        accuracy may allow segment to be generated.9 i9 X1 g, u9 w, B& t7 x
& a+ x- i' `7 }4 `% _
    WARNING: Segment with same start and end points at$ G2 D' `9 j/ A. m! b
        (68380.01 -239974.98) will be ignored.  Increasing output: ?: C8 H+ t, y% s
        accuracy may allow segment to be generated.' v  E8 F/ w# O- L& j' H. c
& G3 `- \; F9 t2 h8 N  `  R" i4 {
    WARNING: Segment with same start and end points at
% v/ F7 ?1 T& T        (68380.01 -205974.98) will be ignored.  Increasing output
2 g* h0 a- U7 h6 _4 f        accuracy may allow segment to be generated.! @1 ?0 U+ b3 U/ W  a$ H

, [; I, e* h3 N8 @2 }% D- x    WARNING: Segment with same start and end points at
. A; ?& Q1 }0 B  Y( g9 V        (68380.01 -171974.98) will be ignored.  Increasing output- M) k9 o" x& z  Y1 m4 W
        accuracy may allow segment to be generated.
. h* |2 ~8 u; m9 `, k8 B. Y" C2 }3 {& G9 P, b( ]! l6 r, o* h
    WARNING: Segment with same start and end points at3 A; `9 I( B. g9 N) U2 b
        (68380.01 -137974.98) will be ignored.  Increasing output
# N: m  Q8 r; _& X6 f& |        accuracy may allow segment to be generated.. P/ ~/ s! p' U

. J- B5 ?: \7 Q5 U1 y    WARNING: Segment with same start and end points at
- ~2 O( b# @* k3 T$ s" m; Y        (68380.01 -103974.98) will be ignored.  Increasing output6 J' C+ K' }! i' B) g
        accuracy may allow segment to be generated.0 V! S: {! n& |$ T; t
% n2 R5 i6 Q. m9 k
    WARNING: Segment with same start and end points at4 S3 m- p5 n, _" v4 k0 }
        (68380.01 -69974.98) will be ignored.  Increasing output4 t% p+ p9 S/ E  T; G$ d1 r0 z% a
        accuracy may allow segment to be generated.
( {6 f: m( H3 ]7 g3 @0 N/ G/ v
) Y$ c: b0 q& Z1 }% v, P* Q    WARNING: Segment with same start and end points at7 F' n9 m# B0 t7 E9 A& {
        (68380.01 -35974.98) will be ignored.  Increasing output& j* Q* ]0 [0 C3 z4 {
        accuracy may allow segment to be generated.; K# a( p8 K& @( W# V3 F
1 t6 f5 @1 c$ A/ Q# F
    WARNING: Segment with same start and end points at
- r9 p) l$ z7 c0 O7 f6 Q' a0 K        (68380.01 -1974.98) will be ignored.  Increasing output
0 c2 @1 B4 G. E8 ~        accuracy may allow segment to be generated.& v& c* `) y9 J/ f# [3 [
" A/ w  s. D; J, V& I
    WARNING: Segment with same start and end points at
) e4 _6 P% D. U- Y        (102380.01 -409974.98) will be ignored.  Increasing output
% M7 f. C: _8 I# t: _        accuracy may allow segment to be generated.
" S/ e8 [- N+ O' _$ E2 b( U5 F' t! k9 }. w7 v
    WARNING: Segment with same start and end points at2 i- P- D+ `4 T3 X
        (102380.01 -375974.98) will be ignored.  Increasing output
2 A/ O$ r3 f, D, e- V- U: s  _7 T        accuracy may allow segment to be generated.
" m$ L5 b3 U  {+ l, J
5 C& C# U3 E/ d! s. A    WARNING: Segment with same start and end points at4 a# |5 n6 l. P0 c
        (102380.01 -341974.98) will be ignored.  Increasing output
2 u3 z7 g! J: V% w4 d* m( G        accuracy may allow segment to be generated.1 u6 i2 O" ?! J9 d' _

8 o9 o0 A7 ^1 J6 J, U. f) s, m* C    WARNING: Segment with same start and end points at
0 v, }: L+ ^: Y9 F        (102380.01 -307974.98) will be ignored.  Increasing output  v: e: F" [3 i( D* M. `, Y7 K
        accuracy may allow segment to be generated.- M2 F! D6 W5 Y

( n- U! W+ J& ?- o7 Z! }7 O    WARNING: Segment with same start and end points at& c1 B' L- t3 W
        (102380.01 -273974.98) will be ignored.  Increasing output
  ?2 ^8 S' c- u7 f& \9 n        accuracy may allow segment to be generated.
8 j, R. \) w/ _2 k/ O! s$ \: \2 u0 {) {# |0 A- h7 X
    WARNING: Segment with same start and end points at
( D. L% j% @$ _; n4 D        (102380.01 -239974.98) will be ignored.  Increasing output
* k8 ^3 ?8 w- {3 r, x! @) A+ ^        accuracy may allow segment to be generated.
$ b% h" o1 J  a4 f6 |" y  T
- I/ y) P% Q9 b/ s' a    WARNING: Segment with same start and end points at
- k9 z+ B# ]4 x        (102380.01 -205974.98) will be ignored.  Increasing output
" A0 v, ]/ O/ R) e3 F        accuracy may allow segment to be generated.* l1 |! a# a. a; `! L& j- {
  }' m/ w  D7 M" v4 M. k" N
    WARNING: Segment with same start and end points at2 j% c# |: G8 Q# f% A
        (102380.01 -171974.98) will be ignored.  Increasing output7 ?1 x- h7 q& M- ~
        accuracy may allow segment to be generated.
% s$ r5 ~. I8 d- Q; V. h( T6 }) s# e( K
    WARNING: Segment with same start and end points at  @; Y. }5 m( D" B
        (102380.01 -137974.98) will be ignored.  Increasing output$ {+ k7 ~/ }7 R) Q# B* a
        accuracy may allow segment to be generated.- |. L; q5 o2 M% J

0 ?3 ~; k$ J9 u( G    WARNING: Segment with same start and end points at: `+ z& z' b- Z* p
        (102380.01 -103974.98) will be ignored.  Increasing output0 A/ \( d$ I* w4 e: G1 c
        accuracy may allow segment to be generated.0 J: ^9 P& Z% ?. I# p

: \3 i6 ^( @4 c    WARNING: Segment with same start and end points at
* |$ U8 p" V. Z' }        (102380.01 -69974.98) will be ignored.  Increasing output
% I5 L* R( O$ K; g9 ?# M        accuracy may allow segment to be generated.6 ~3 l, v$ l% e* S& K5 _1 u7 l
7 P& `* m: i: N1 H5 _
    WARNING: Segment with same start and end points at6 X9 w: I6 H; b. E
        (102380.01 -35974.98) will be ignored.  Increasing output
' R. Y- O0 c: r# _5 }        accuracy may allow segment to be generated.
8 H: {$ `/ ^2 m
, r& V& K& u6 v* [) s+ l  P    WARNING: Segment with same start and end points at
0 \$ p2 n5 T( s, R& I        (102380.01 -1974.98) will be ignored.  Increasing output
0 f* c7 e# n; I) f        accuracy may allow segment to be generated.
: F8 X% \. @& j
" V) ]1 |; E% v8 O& ?! g# |    WARNING: Segment with same start and end points at% p! B$ f; P, G+ m
        (136380.01 -409974.98) will be ignored.  Increasing output* ~0 k7 h9 K! @8 r' ~1 w
        accuracy may allow segment to be generated.
" d; o# o- ~9 }4 n- O$ f
! ?% [4 c( d" y3 t: D0 D8 Z# W' F    WARNING: Segment with same start and end points at
" a9 W9 t& P; O' l/ ?+ J( Y$ X! u- B  X        (136380.01 -375974.98) will be ignored.  Increasing output- ?: `0 l& P$ p. B0 l
        accuracy may allow segment to be generated." I# Z7 N8 o. u' b3 I
: `) c$ m2 m2 S
    WARNING: Segment with same start and end points at/ G! N% Q  p1 q  J
        (136380.01 -341974.98) will be ignored.  Increasing output
- v; b. ]! H/ ]' e; u: j        accuracy may allow segment to be generated." T0 `' `% k- t" `6 }: @

3 T; R! r* g# k5 x2 B% y" n1 e    WARNING: Segment with same start and end points at! t9 r: \- o1 r! m! L, p# ]
        (136380.01 -307974.98) will be ignored.  Increasing output
3 ~+ V: Y  a) _3 H9 S) w        accuracy may allow segment to be generated.
: v6 G6 A# {2 z4 u9 G: Z( \/ R3 d% J* R! u4 Y
    WARNING: Segment with same start and end points at
; n/ I/ |# W5 z( w1 E1 p        (136380.01 -273974.98) will be ignored.  Increasing output1 h/ ^  @" _+ w$ V* f! }
        accuracy may allow segment to be generated.
0 K& B' G, A& q' P* f8 P0 ]5 A" h4 k4 O8 }3 r) q
    WARNING: Segment with same start and end points at
; M8 j* D" H) H; H        (136380.01 -239974.98) will be ignored.  Increasing output4 e8 ~0 X0 P  X! e! @
        accuracy may allow segment to be generated.
; y/ J; D$ J% A3 q1 l3 w5 E6 }
" }1 }$ s" F& q9 _2 n1 I    WARNING: Segment with same start and end points at/ P; m  T- H% ^7 Q( j
        (136380.01 -205974.98) will be ignored.  Increasing output
3 A- P0 Z* y, s9 s  k. e7 e9 W3 A        accuracy may allow segment to be generated.
% ], B3 p2 T( G2 L" |' v# [
8 {6 Q5 k9 h  ?    WARNING: Segment with same start and end points at
! v5 @+ x0 C! r! R% _        (136380.01 -171974.98) will be ignored.  Increasing output& L' k4 \6 K# `4 b+ C) w; x
        accuracy may allow segment to be generated.
7 U: y; }  P" b3 g9 r' ]* l2 ^3 ~
    WARNING: Segment with same start and end points at
5 X5 K! J/ @7 d7 ]. a' \        (136380.01 -137974.98) will be ignored.  Increasing output' {& q. d; o0 S
        accuracy may allow segment to be generated.
" @+ R9 X7 w) B  g$ J3 Y6 ]  h0 c
# B: b" O; E6 ^' x3 [2 Q9 Y9 v    WARNING: Segment with same start and end points at
# k; r  J3 q. ], R6 e4 O+ P        (136380.01 -103974.98) will be ignored.  Increasing output! \3 b1 J1 }2 ?, y* _/ Y
        accuracy may allow segment to be generated.8 u6 a9 R. N: n3 [: E+ x

- _. p9 [9 b) t+ L+ ]8 L) Q6 a    WARNING: Segment with same start and end points at
5 H5 @( v3 j; y$ A* B& @        (136380.01 -69974.98) will be ignored.  Increasing output
( |$ {  U) ~: A3 ]. r: J$ m" R        accuracy may allow segment to be generated.$ w, f/ |/ A. O# n6 W1 ?$ k: `

7 h6 w7 X) r  y. k$ N    WARNING: Segment with same start and end points at2 u# J0 R% G8 _
        (136380.01 -35974.98) will be ignored.  Increasing output
7 c/ ]# f# x' T) a3 e5 z        accuracy may allow segment to be generated.
) I3 K3 s1 n' C1 N; d" _
2 `& P* f5 B; A% J1 M    WARNING: Segment with same start and end points at
7 V) e8 P! A' ], E* q/ c        (136380.01 -1974.98) will be ignored.  Increasing output+ |* x  H" F0 ]
        accuracy may allow segment to be generated.
7 \" ]9 X( O/ A* V- h) W* S# p  t$ w
    WARNING: Segment with same start and end points at7 K0 n# _5 }* z, Y, [- s) |
        (170380.01 -409974.98) will be ignored.  Increasing output
1 k% U) h% X" U+ i        accuracy may allow segment to be generated.6 _+ {+ J& L  i2 _( ~6 k, k) m2 _# L
/ {& \# y) `; n3 s9 ]
    WARNING: Segment with same start and end points at) z8 O2 I. k8 Z0 G
        (170380.01 -375974.98) will be ignored.  Increasing output
3 [+ k' _+ H  b        accuracy may allow segment to be generated.
2 j3 t6 J- |" C' B8 e4 B8 ^- h9 Y3 w, d: [8 T+ s
    WARNING: Segment with same start and end points at- O* U! m! ?4 k
        (170380.01 -341974.98) will be ignored.  Increasing output/ ~5 Z& Q; e2 I$ P
        accuracy may allow segment to be generated.! e$ W2 F9 Z/ F7 C+ v/ R, i

: J5 H& U7 C- k: t" \: @    WARNING: Segment with same start and end points at
4 D/ t0 h+ `8 ]4 j3 x/ s6 q2 q        (170380.01 -307974.98) will be ignored.  Increasing output* N8 i6 z5 y+ K- u- F
        accuracy may allow segment to be generated., [! _( k- U. e+ K) w9 N5 u
: Z8 H6 g! ^" P# K  t" g
    WARNING: Segment with same start and end points at7 |) g: f' k' r
        (170380.01 -273974.98) will be ignored.  Increasing output$ P, s2 B) F5 }3 f% S
        accuracy may allow segment to be generated.
$ a; O) u3 j/ b" h9 c& J: _: L) z: ~1 n1 k( O
    WARNING: Segment with same start and end points at- x5 k7 x+ `& O) y+ {% d0 X
        (170380.01 -239974.98) will be ignored.  Increasing output
" U& i* r* Q0 b6 P! Z        accuracy may allow segment to be generated.
: a" k& }9 w. p2 s) n$ H8 V2 c2 J. W9 q  ^
    WARNING: Segment with same start and end points at
& k9 p, D, ]$ a* ]7 u' {        (170380.01 -205974.98) will be ignored.  Increasing output
! w9 Z6 u  O+ g5 G        accuracy may allow segment to be generated.
$ M5 e6 u3 _, t& n' S0 L3 B6 E: P" u% ?
    WARNING: Segment with same start and end points at* K' Z' F) p+ C' G
        (170380.01 -171974.98) will be ignored.  Increasing output
1 [& d, Q- S8 s        accuracy may allow segment to be generated.
- K; H. m& s. N3 G" T- y% X6 v8 U0 _% f4 T
    WARNING: Segment with same start and end points at  G2 T' ~, z  v' f  b# s8 `
        (170380.01 -137974.98) will be ignored.  Increasing output
9 f1 S0 g% M+ i8 c) q" e        accuracy may allow segment to be generated.* U7 F6 C! ^6 T3 T* C& Z
2 z6 t  c5 I6 K* n! L# l- Z" }
    WARNING: Segment with same start and end points at
2 o7 z4 z! L! l; ^/ e        (170380.01 -103974.98) will be ignored.  Increasing output: ]2 E  w0 E+ @" t: j, X, g# o- H
        accuracy may allow segment to be generated.
/ w6 t" k7 E* i; q. ]1 t$ G+ _6 R  k* l6 G6 W# d' r
    WARNING: Segment with same start and end points at
. T, \0 M3 y8 h" b        (170380.01 -69974.98) will be ignored.  Increasing output
: W) Q2 X- O% l! [7 l        accuracy may allow segment to be generated.
9 j: u$ F0 B: v. l2 l( n! k( @; {/ C) D; j: g) G; F
    WARNING: Segment with same start and end points at/ f' i' r" c$ z' q
        (170380.01 -35974.98) will be ignored.  Increasing output
7 x/ r4 O3 \5 L- T. u) B        accuracy may allow segment to be generated.$ m% H8 b" _: O. r' E
- Z! M; C2 [* }% Z
    WARNING: Segment with same start and end points at
! F4 [; q7 o0 T: W  C: x* r4 C        (170380.01 -1974.98) will be ignored.  Increasing output/ o" r; _0 O, I( r
        accuracy may allow segment to be generated.
. m+ V& Z( v* C( L+ f3 b3 |2 B
9 k7 f& }9 A& [9 b7 k    WARNING: Segment with same start and end points at
. }' J6 ]0 h& i3 m0 S$ W# |$ @9 A6 O        (204380.01 -409974.98) will be ignored.  Increasing output* f( V& G0 a* @4 @) ~
        accuracy may allow segment to be generated.0 `- w* O/ a: Q  K
* ?4 N# A- N( V3 x# r- @# i4 F
    WARNING: Segment with same start and end points at$ }4 F% G! l. u' P
        (204380.01 -375974.98) will be ignored.  Increasing output
. ?: ^5 \5 m8 Y5 ]/ P        accuracy may allow segment to be generated.  F7 q1 z7 m: e. q
8 Q$ p1 W! _5 f
    WARNING: Segment with same start and end points at$ a( i- a5 E; G  r; K$ ]
        (204380.01 -341974.98) will be ignored.  Increasing output6 s; x4 j, Z$ b* I: F
        accuracy may allow segment to be generated.
' c- {! ], i0 P- x  V
( L0 D% a$ I% W! l/ O    WARNING: Segment with same start and end points at
& F+ j8 D' t: Z        (204380.01 -307974.98) will be ignored.  Increasing output
! E0 Y& L5 \$ y) R, b& u. o  i        accuracy may allow segment to be generated.0 A. X% p- @( B3 {9 @

8 L" A* R8 F. x# m) }' E3 \$ H' d    WARNING: Segment with same start and end points at$ q( K/ ~7 P5 R, r9 j
        (204380.01 -273974.98) will be ignored.  Increasing output( v4 S3 u0 p" b6 P8 M
        accuracy may allow segment to be generated.0 j$ w6 a6 w& `3 j0 m; w8 m, }
" O- v* z8 V, H, N' ~$ y3 p
    WARNING: Segment with same start and end points at7 \* W# y; x. q- q) w, H& r/ p$ ^
        (204380.01 -239974.98) will be ignored.  Increasing output
+ w+ g6 }8 l' z2 c. d        accuracy may allow segment to be generated.0 X  }6 A/ _' p% X
& v/ H9 u+ Y+ U0 C
    WARNING: Segment with same start and end points at) E/ T$ O  x$ I
        (204380.01 -205974.98) will be ignored.  Increasing output
" I& F; u' \; A: Y        accuracy may allow segment to be generated.: a. d+ e+ {2 S; w. |. u
& r& v1 o. N2 _  r
    WARNING: Segment with same start and end points at2 F# a' g, r, v0 k( a; F- ^! e5 E1 G
        (204380.01 -171974.98) will be ignored.  Increasing output
3 ^$ Y7 a; H7 j& H, w        accuracy may allow segment to be generated.
5 @6 }/ @: ^  W. X' e
2 X) Q: k5 l6 `$ [1 {& }1 a5 Y    WARNING: Segment with same start and end points at
* J4 L, f! F# @9 J+ N0 p6 v! Z        (204380.01 -137974.98) will be ignored.  Increasing output% k- `+ \$ ~* A0 v+ g, O4 |3 L
        accuracy may allow segment to be generated.
  w$ e- g8 P5 E* {% q3 B( q! m' Q
    WARNING: Segment with same start and end points at
8 t4 Z' H5 Q  e4 v7 [        (204380.01 -103974.98) will be ignored.  Increasing output
( d  q5 B* p- n+ Q  t+ A' q        accuracy may allow segment to be generated.
/ I5 D) N- Y& y% ~( m9 N3 A9 C7 W* U/ I% @3 t  u
    WARNING: Segment with same start and end points at
  X9 [' D7 z* W- V+ a        (204380.01 -69974.98) will be ignored.  Increasing output
4 U9 h) O# P9 {7 X: ]        accuracy may allow segment to be generated.9 u1 ]. [9 B0 o5 B* a+ a3 L

2 i' K2 K  w4 @3 M: M" g" R4 p    WARNING: Segment with same start and end points at* D8 {$ _6 [6 T+ b2 T
        (204380.01 -35974.98) will be ignored.  Increasing output
: `; _  r) J! Q+ r# D        accuracy may allow segment to be generated.
, \3 ]( ]2 x" {. q' z% `3 I2 ^- |7 a7 p
    WARNING: Segment with same start and end points at# t' B- B6 U5 v  {4 m
        (204380.01 -1974.98) will be ignored.  Increasing output
7 M5 d3 P$ E$ ]2 j        accuracy may allow segment to be generated.* S) P" A4 W& Q1 ?; g: j7 H! B
7 d! K4 X0 ]# @) i
    WARNING: Segment with same start and end points at$ d5 V2 Y" u+ w- L0 s: y
        (238380.01 -409974.98) will be ignored.  Increasing output; F! T" J( g- {# y* j0 v4 r
        accuracy may allow segment to be generated.
% j$ R9 {: l. X& r; k( ~) y; {
+ t  U& y# b1 U" j+ [" \3 S- B    WARNING: Segment with same start and end points at
7 {8 N5 V) B7 N9 _# u        (238380.01 -375974.98) will be ignored.  Increasing output5 E8 o$ j' A8 Z; }, U
        accuracy may allow segment to be generated.; D& O3 H+ @8 a

. L; }" |' k3 m* e! @7 J& O8 x    WARNING: Segment with same start and end points at
, I6 n" e- p1 Z! b        (238380.01 -341974.98) will be ignored.  Increasing output( d3 S9 X% q  n0 `& C* V
        accuracy may allow segment to be generated.: K; s3 }3 @  q
4 ?2 h% t: b. M( D; F
    WARNING: Segment with same start and end points at; A' }8 B, u/ }% n& T5 @. a
        (238380.01 -307974.98) will be ignored.  Increasing output
9 Q) S" X! a, ?        accuracy may allow segment to be generated.
& i8 m. l4 o# y
1 ~0 Q3 c. \" b# P0 ~! h    WARNING: Segment with same start and end points at! d7 a$ g8 e  X% |' O! m
        (238380.01 -273974.98) will be ignored.  Increasing output
% j/ o5 k  Q) t3 f  I+ ^        accuracy may allow segment to be generated.1 r3 r, e- a4 ~; y

% N" d& x/ }4 |( z/ U6 v    WARNING: Segment with same start and end points at4 L0 i6 Q' N5 ]; r  V' a- Y
        (238380.01 -239974.98) will be ignored.  Increasing output
2 S8 W4 a6 f$ y) |/ [        accuracy may allow segment to be generated.
& `7 b  k0 b( T) H$ J5 [8 l, G* H# m5 M3 v! n
    WARNING: Segment with same start and end points at( B0 {8 l2 j% T) f# h
        (238380.01 -205974.98) will be ignored.  Increasing output
' R8 x# b, T, I$ b) \; X9 H        accuracy may allow segment to be generated.' A/ v  b8 l4 ~; j

1 E2 U2 B5 E$ t; r0 B0 a# u    WARNING: Segment with same start and end points at9 f! r6 U% m( {4 F0 {$ s6 e
        (238380.01 -171974.98) will be ignored.  Increasing output9 T* f8 x5 L+ ~7 l, N, E
        accuracy may allow segment to be generated.7 Y& i3 I/ j1 p; |

) s& u, n4 H+ H/ d4 \" u! I    WARNING: Segment with same start and end points at
3 k2 e8 N5 p7 X0 N- E! g! O8 \        (238380.01 -137974.98) will be ignored.  Increasing output2 c# |  I4 {$ g
        accuracy may allow segment to be generated.3 W0 s& o  G1 Q2 i/ a) r- v
$ _; w! D4 m& @# ?+ u; r
    WARNING: Segment with same start and end points at, n- Q8 b% o; k: g1 n
        (238380.01 -103974.98) will be ignored.  Increasing output, `1 S5 N1 `! O% `! m7 I9 {1 ?
        accuracy may allow segment to be generated.2 H7 \9 s. d$ p! j, m' v# Z  n

! S3 R8 k3 X5 S; j* v: S    WARNING: Segment with same start and end points at3 Q9 l6 E$ d. {6 \8 J4 ~8 }! Q
        (238380.01 -69974.98) will be ignored.  Increasing output
; T! t, i5 X$ f        accuracy may allow segment to be generated.
7 e6 L8 D- D- Z, x# K  G) i: M1 \0 i0 c; i  m
    WARNING: Segment with same start and end points at0 B& w* L4 |1 I7 W. [7 Q
        (238380.01 -35974.98) will be ignored.  Increasing output
5 N+ t" N& m6 P# t& i6 s1 [. o' a* ]        accuracy may allow segment to be generated.
$ V3 a0 Y  {9 w$ z: T, Y% o. A9 E8 y6 m) H6 A9 n; m! L
    WARNING: Segment with same start and end points at
5 S3 g9 G0 \; h        (238380.01 -1974.98) will be ignored.  Increasing output) P1 }; j6 _9 T
        accuracy may allow segment to be generated.
% x/ u) D& S6 v. A1 k7 D+ H* ~5 \8 K1 j" O, r) [
    WARNING: Segment with same start and end points at
% o2 y7 \1 v- `" ~) ?5 I        (272380.01 -409974.98) will be ignored.  Increasing output% q/ m, p* F+ F! m) a
        accuracy may allow segment to be generated.3 ^& `/ o# Z" `
3 i5 F2 ~1 t) z3 X- Z
    WARNING: Segment with same start and end points at
0 ], E0 f% ?* ^1 d& Q1 c        (272380.01 -375974.98) will be ignored.  Increasing output' k, A$ H" I9 x
        accuracy may allow segment to be generated.8 ?0 d5 u' J0 e+ J& k8 G/ I" {/ q

6 G) D6 V; M1 A0 L' E. B    WARNING: Segment with same start and end points at
. N# F( L7 D7 h1 Y        (272380.01 -341974.98) will be ignored.  Increasing output+ ]4 M6 ]- e- g4 N
        accuracy may allow segment to be generated.
/ h0 y: _2 A' k1 D9 Q. j
- R8 ^( H& B. W; @: h! R. C    WARNING: Segment with same start and end points at
& }$ w0 S3 }; h$ ^$ f/ s7 ?        (272380.01 -307974.98) will be ignored.  Increasing output
$ o- n8 l  U/ x. e$ _2 }8 T  Y        accuracy may allow segment to be generated.
& }4 F, B1 D# P) s
" O9 N" @3 B6 O4 H1 Z    WARNING: Segment with same start and end points at
) |! \& \& x/ V/ P2 p, ]& ^0 e        (272380.01 -273974.98) will be ignored.  Increasing output
& r  Z& n& A$ l2 r+ s        accuracy may allow segment to be generated.
/ O# O7 v1 _& H2 J6 [
3 z0 d# J6 G0 _- R6 [3 T; X$ t    WARNING: Segment with same start and end points at) g6 i, q' h6 N2 n
        (272380.01 -239974.98) will be ignored.  Increasing output+ Q8 k% i+ h7 F
        accuracy may allow segment to be generated.; q4 m' f& u4 P  D# h0 e
; _  |9 i% ^; a$ S; b
    WARNING: Segment with same start and end points at1 m1 b; {6 `+ T  v0 f
        (272380.01 -205974.98) will be ignored.  Increasing output2 d% f1 d  T4 V; e
        accuracy may allow segment to be generated.
- s0 c; h5 T' v. m
; z' A. W) c( W( H    WARNING: Segment with same start and end points at; H4 v* Y/ p2 ]! Q
        (272380.01 -171974.98) will be ignored.  Increasing output! y8 R7 W$ H+ j1 @3 Q5 m. W" v
        accuracy may allow segment to be generated.; i4 o& R, J* G% f3 g) O
1 M, T/ Q( ]& m, w" _" U
    WARNING: Segment with same start and end points at/ p8 j$ m9 V2 C* G
        (272380.01 -137974.98) will be ignored.  Increasing output9 G8 e2 `. f1 `, a  f5 M; k
        accuracy may allow segment to be generated.5 a$ @! e% [/ ^' a

  Z8 r# b7 H4 p4 p6 A7 }- }    WARNING: Segment with same start and end points at+ ]$ w# F" G: ]" e
        (272380.01 -103974.98) will be ignored.  Increasing output
. }2 t2 m4 H1 g        accuracy may allow segment to be generated.
; j0 E1 F! T/ Y
8 R! H1 f7 K3 B: T    WARNING: Segment with same start and end points at
0 Q9 ^/ G- }+ s+ V7 ~4 j        (272380.01 -69974.98) will be ignored.  Increasing output
& }9 W* D' j. C1 D5 z7 E3 ~3 _        accuracy may allow segment to be generated.; i3 q) {0 f$ r& B! ]+ u" U, d
# ~. H4 l+ B7 u- I' u# h
    WARNING: Segment with same start and end points at
  P9 \5 ^0 T/ k8 E8 m+ @        (272380.01 -35974.98) will be ignored.  Increasing output4 z  J) e. N% f" I
        accuracy may allow segment to be generated.
4 o& K# m6 l% _5 U# ~! }5 H$ @" g: I; k5 y+ U" n, u2 K
    WARNING: Segment with same start and end points at
+ F1 J! e1 o. w" r. Q3 z        (272380.01 -1974.98) will be ignored.  Increasing output5 x8 B$ l1 O& ~' x0 k, D
        accuracy may allow segment to be generated.' d* E% R, j) k+ d# o/ m
+ E# s4 ~  ^$ K4 d. B
    WARNING: Segment with same start and end points at
6 Z3 E  K; X  N, {. j" c, C        (306380.01 -409974.98) will be ignored.  Increasing output
6 O5 o% k+ G0 _; G6 ^/ w        accuracy may allow segment to be generated.  B  Y; z- c# T; W8 n

* s0 z. t! g- _- S6 Z7 W    WARNING: Segment with same start and end points at0 X1 Y4 h8 @0 m) @; {1 W$ O
        (306380.01 -375974.98) will be ignored.  Increasing output( U9 O/ n1 `9 T$ U
        accuracy may allow segment to be generated.
( [# I, ~" J7 z
; N. s. K6 K5 n- G& C- B    WARNING: Segment with same start and end points at
$ h3 N( _5 L+ S9 H; [' ?, H( `        (306380.01 -341974.98) will be ignored.  Increasing output
% I8 ?" @  B  ~$ d        accuracy may allow segment to be generated.3 V. R+ ]  k3 b; i1 I

4 r0 u) }# l4 A. p+ {; @* u5 M    WARNING: Segment with same start and end points at& |: a/ y6 `2 k  D& X/ X: c* r+ z
        (306380.01 -307974.98) will be ignored.  Increasing output
! F  M+ T+ A( P' y, d5 d3 e        accuracy may allow segment to be generated.
5 L0 f6 ~- o9 u! c
2 x3 R4 g; t4 L) k7 Y2 v" I    WARNING: Segment with same start and end points at
+ d% u# n) w. ^4 u5 |3 S        (306380.01 -273974.98) will be ignored.  Increasing output
7 M1 M6 u8 s/ b4 Q/ z        accuracy may allow segment to be generated.
7 J' B' B- ]- L9 ^
# t2 k7 L  M* E9 \    WARNING: Segment with same start and end points at6 p+ W6 ]+ K. Z) {& x& N
        (306380.01 -239974.98) will be ignored.  Increasing output; P" M" H2 T  G7 d
        accuracy may allow segment to be generated.2 `0 w# G& H! c% _2 x, A8 ^

, ]$ P1 Z9 ]0 B8 P1 t5 z( R/ ~    WARNING: Segment with same start and end points at$ }2 v7 p3 r  C: j" V# H  c# F
        (306380.01 -205974.98) will be ignored.  Increasing output9 G! N, \" O9 [+ }
        accuracy may allow segment to be generated.9 a) _; \. X" O/ B% ?! M) c* ^

+ ^9 ^* J2 U; S) t5 V- [; b    WARNING: Segment with same start and end points at: _2 T! \1 T6 G# g9 O; [
        (306380.01 -171974.98) will be ignored.  Increasing output2 O! M9 M: K0 p) m& a  q$ b) f
        accuracy may allow segment to be generated.' S$ G2 `  A4 R
6 a9 j% c- @+ X; l
    WARNING: Segment with same start and end points at0 v) I) {* q6 b) B& K: U
        (306380.01 -137974.98) will be ignored.  Increasing output
3 t9 t$ J( J) `5 N        accuracy may allow segment to be generated.
9 r! `# D; R3 U$ Q5 I; q, D: Q6 a) k2 j6 f2 P) @0 A: d( p) [
    WARNING: Segment with same start and end points at* B5 d+ a  C) B( R3 |% z- p
        (306380.01 -103974.98) will be ignored.  Increasing output6 v  x, X, N6 H8 j. ^' |
        accuracy may allow segment to be generated.
9 Z* Y7 H. h9 @0 F5 g2 J% I1 B* M. u( p7 k, R+ Q
    WARNING: Segment with same start and end points at# D/ a0 J7 o- k5 q7 B) Z
        (306380.01 -69974.98) will be ignored.  Increasing output
6 n( h+ b' r8 F7 G+ r9 J        accuracy may allow segment to be generated.
8 p3 z& N8 v: A' L1 W8 n* g: F2 |" P& \+ C/ B/ L
    WARNING: Segment with same start and end points at, S; h+ [1 q! P4 P5 ?
        (306380.01 -35974.98) will be ignored.  Increasing output
* `* Z' z4 |/ Y& Y! e0 B        accuracy may allow segment to be generated.
" ?; u* \' V$ Q2 [. ^! g6 r8 J9 v: m
    WARNING: Segment with same start and end points at- E& Z6 q% a, N( P
        (306380.01 -1974.98) will be ignored.  Increasing output
- R$ O/ ]5 G% x# U) W9 m( ~) u! M        accuracy may allow segment to be generated.1 r" \0 J8 U4 \- f& V

8 n5 k# D" ~7 ?: W: g. e  U    WARNING: Segment with same start and end points at
. s8 c( |6 q+ ]9 k8 X% }        (340380.01 -409974.98) will be ignored.  Increasing output
; M/ x5 R5 G; S* W& U& M        accuracy may allow segment to be generated.
2 j8 G4 A1 y" C$ _* r4 `0 _; u' g# B5 w
    WARNING: Segment with same start and end points at% \2 z' r/ g! J# X
        (340380.01 -375974.98) will be ignored.  Increasing output
: S9 d1 S& n5 v% ~        accuracy may allow segment to be generated.
+ x: f* l4 t: r; Q4 d! r) Q1 S5 d2 |: E
    WARNING: Segment with same start and end points at" S5 o/ u, L' |+ _" y
        (340380.01 -341974.98) will be ignored.  Increasing output
5 q8 X: K: W! g  C        accuracy may allow segment to be generated.
( \& {; M& Y# c9 a; l1 s. d1 h
$ j7 v! Q- K- t' ~    WARNING: Segment with same start and end points at
- X' a- t: ^& y        (340380.01 -307974.98) will be ignored.  Increasing output
# N( P) m' b8 L) O        accuracy may allow segment to be generated.
- s6 g8 ~* W# ~: T. J6 u
) }) W7 U1 i4 @3 z    WARNING: Segment with same start and end points at7 a* H0 i4 u, V8 b
        (340380.01 -273974.98) will be ignored.  Increasing output  X7 g) G5 l; e$ r; R) j2 P* }
        accuracy may allow segment to be generated.* J/ ~8 ]! @( l! P" b

+ a! q8 o  K, \/ [2 H4 }4 w; I    WARNING: Segment with same start and end points at; Q5 D4 ?# i: K/ J
        (340380.01 -239974.98) will be ignored.  Increasing output
  |$ v5 ~& k0 g$ w2 d7 M9 Y& \        accuracy may allow segment to be generated.2 x9 ]: ^' A3 W

$ n' I5 c6 p3 b  c1 {  Q    WARNING: Segment with same start and end points at
4 ]. B% g* g, u! w        (340380.01 -205974.98) will be ignored.  Increasing output& ~0 c( `/ g. J8 B; }  x+ q
        accuracy may allow segment to be generated.
7 [" r. j$ M  x- F/ h" v/ O( J+ @6 k
    WARNING: Segment with same start and end points at
" L1 ?5 j1 G* X& |( ?        (340380.01 -171974.98) will be ignored.  Increasing output
8 N  v- |( U, }6 F        accuracy may allow segment to be generated.5 ]8 c, [8 f4 F3 ^! j

- t6 L; u9 l1 B: T+ M    WARNING: Segment with same start and end points at" f, [. k+ U/ M9 p0 e! J
        (340380.01 -137974.98) will be ignored.  Increasing output
  ?6 `6 H% h4 L" ]" x/ x        accuracy may allow segment to be generated.! a7 _) B+ j; f+ |5 p# r8 h( S
) {$ b8 T8 }0 E: ^
    WARNING: Segment with same start and end points at7 J; X& @# |( n
        (340380.01 -103974.98) will be ignored.  Increasing output5 W9 ]7 E7 D' O3 |, o) D
        accuracy may allow segment to be generated.
) t( Z6 w8 u0 ^* [2 t7 _- G8 Y- @9 d* j' A' k$ N
    WARNING: Segment with same start and end points at
* o+ I7 J2 {) T. z" t7 n1 E        (340380.01 -69974.98) will be ignored.  Increasing output- u' m# E% _- J+ ~' [
        accuracy may allow segment to be generated.
4 X3 e8 V, n6 |# S- k) G1 v$ G7 ?9 S
5 m9 q( F7 q" X; K    WARNING: Segment with same start and end points at/ k% _8 }+ [* m- b% R7 A  `+ p. ~9 z1 k
        (340380.01 -35974.98) will be ignored.  Increasing output; }  s: p0 {, u/ g3 V
        accuracy may allow segment to be generated.6 ?- ?- |2 x, h" Y/ Z$ k! j4 N, s

8 ~( F. k$ L$ d; g; p7 ~$ m    WARNING: Segment with same start and end points at5 q% d! R/ p' s' S2 a' ^4 a1 u7 J
        (340380.01 -1974.98) will be ignored.  Increasing output
% s% J2 }! w8 ]        accuracy may allow segment to be generated.
( d. _5 C: O3 G8 v
) q+ b% N- a( e( Z; R% R: b    WARNING: Segment with same start and end points at! ^/ B$ g7 c8 A. x7 i
        (374380.01 -409974.98) will be ignored.  Increasing output
: g8 a7 |5 j' Q+ q. B  H        accuracy may allow segment to be generated.
- h/ a! o- g$ x- V" i- \) |1 M
1 y# l( z/ I: C3 m    WARNING: Segment with same start and end points at& b( N1 ]6 }$ g! r" ^* B" S  Q
        (374380.01 -375974.98) will be ignored.  Increasing output: Z& m5 F- l) G6 ?  R
        accuracy may allow segment to be generated.
, s9 p2 r$ ~& Z* I. F% ^9 o
9 @! T) e0 Z( e2 c9 }7 P    WARNING: Segment with same start and end points at
$ X& W2 D9 K4 Z% }4 J        (374380.01 -341974.98) will be ignored.  Increasing output
, N, e$ I  T/ F        accuracy may allow segment to be generated.
" K9 l( f& \5 q8 o# e" H3 m& \
$ y, ?( p# @: e4 m, M    WARNING: Segment with same start and end points at
$ X$ D8 J% K8 e/ c9 c        (374380.01 -307974.98) will be ignored.  Increasing output
/ h3 E5 y% U" y7 ~$ ~        accuracy may allow segment to be generated.: ^. k$ `: g7 X, {
1 }$ L: ]$ V3 [" a  a5 t* g
    WARNING: Segment with same start and end points at
' q, _! p" }, w) U1 b        (374380.01 -273974.98) will be ignored.  Increasing output
, I; v" ~; l& t! a" \        accuracy may allow segment to be generated.
6 H& I- b# C4 ?$ k
7 j, P2 f* |% E9 d    WARNING: Segment with same start and end points at, R% P9 v2 X1 V, b, P
        (374380.01 -239974.98) will be ignored.  Increasing output; T9 y! p( d4 x0 n! I& W- j) ~
        accuracy may allow segment to be generated.
; T2 G2 R1 I" W6 l5 Z4 g  r. m3 t! M, p8 `6 a3 Y' }0 @3 `0 P
    WARNING: Segment with same start and end points at& I. P2 O% l. t/ R/ h( ?# @! P
        (374380.01 -205974.98) will be ignored.  Increasing output) w- G2 k# K0 L  |& T% `, R( H9 Q
        accuracy may allow segment to be generated.7 I8 L: L: ^* u7 n% ]/ U1 I
: Y6 i* ~$ L! v5 S+ F- d& V* V
    WARNING: Segment with same start and end points at4 n; _, m+ ~+ A1 ]4 C$ |
        (374380.01 -171974.98) will be ignored.  Increasing output
2 E0 P1 _+ J  N        accuracy may allow segment to be generated.
4 C+ a& f7 ^4 C# Q; y" ]: k7 u# ~- M/ N/ K
    WARNING: Segment with same start and end points at: j0 ^: U2 L- J) {
        (374380.01 -137974.98) will be ignored.  Increasing output( `0 t+ N+ _9 K& I8 \
        accuracy may allow segment to be generated.
5 [' ^7 N& u: k! L+ ~3 Z  z5 }5 q& F$ F3 M) O5 U  B
    WARNING: Segment with same start and end points at
% S  A1 k% O: U2 C: G/ P. A1 c1 j        (374380.01 -103974.98) will be ignored.  Increasing output) j, o3 j. p) l  Y) @, d
        accuracy may allow segment to be generated.
/ B: _% R5 Q$ b, E: g6 I0 @: O$ _9 N# Q
    WARNING: Segment with same start and end points at$ b" C( J8 L3 u8 h) F
        (374380.01 -69974.98) will be ignored.  Increasing output1 x9 H5 J, M0 V4 W' H
        accuracy may allow segment to be generated.( E6 t6 ]0 a, U8 o; m
% p& L6 I3 e/ A2 Z: ^$ j
    WARNING: Segment with same start and end points at& ?3 O4 Y2 u% ?: I' z
        (374380.01 -35974.98) will be ignored.  Increasing output9 C! u& ]" _5 z9 Y6 V
        accuracy may allow segment to be generated.
& B4 j7 q& V9 F9 g6 |8 M( u
9 R$ z/ f, h# Q" ?2 z- U    WARNING: Segment with same start and end points at5 S6 R2 a! X" I+ u2 L( S
        (374380.01 -1974.98) will be ignored.  Increasing output6 U0 g# v6 z6 b
        accuracy may allow segment to be generated.( m0 }2 Y( g% A8 V* U* Q% W
1 t# Y( {- [) e! k& h  C
    WARNING: Segment with same start and end points at! x4 m& {3 {; b# u
        (408380.01 -409974.98) will be ignored.  Increasing output& m( h1 r( _; c7 b, [
        accuracy may allow segment to be generated.  h/ u0 S; J3 O

* q+ r3 u! ^/ g$ g! a' |    WARNING: Segment with same start and end points at
4 `! T% K5 T$ Y6 V0 ]( p8 [  }' n/ h        (408380.01 -375974.98) will be ignored.  Increasing output
. |! M; _3 W  ^' U0 H& ^% f        accuracy may allow segment to be generated.& H3 C! Q, q( E# x

: G9 a- L. w+ o+ `    WARNING: Segment with same start and end points at
9 d8 O2 ?5 Q) I        (408380.01 -341974.98) will be ignored.  Increasing output
& T$ A& w: ^( p# u6 t! t/ x        accuracy may allow segment to be generated.
* t5 L# y! N4 @3 u- I
- @; q& o0 q, m3 m+ \; w, i/ R    WARNING: Segment with same start and end points at
( s/ D. V9 S% e' H        (408380.01 -307974.98) will be ignored.  Increasing output
% b& @$ i/ R: |% s1 k, [- C        accuracy may allow segment to be generated.0 W8 U0 d8 h4 x

- j: n* P7 Z6 \' g5 W    WARNING: Segment with same start and end points at
. S9 X/ `$ ?' v8 q8 E$ Z        (408380.01 -273974.98) will be ignored.  Increasing output( j  h$ t6 G  }+ ~1 q
        accuracy may allow segment to be generated.6 x4 w& a0 Y0 M4 U& o  Z

6 `, ^, u1 J8 \! I    WARNING: Segment with same start and end points at
3 o! f) d9 f" p* _6 h- n) ^, h7 a$ _        (408380.01 -239974.98) will be ignored.  Increasing output
0 ]' H/ R" w; Y$ x) U7 |        accuracy may allow segment to be generated.
+ u) W( t; E; g# h7 h  D; K, k; D3 S0 A0 W
    WARNING: Segment with same start and end points at
3 H5 U/ ?/ e5 _* V5 r, r3 C        (408380.01 -205974.98) will be ignored.  Increasing output
# U8 }! k4 |$ s" S2 ~2 Y        accuracy may allow segment to be generated.
9 P, S. R( w1 V+ e: f7 E3 z$ d" s* o( K3 b+ I- ^7 \
    WARNING: Segment with same start and end points at
  A2 O1 M- w3 R, b% l        (408380.01 -171974.98) will be ignored.  Increasing output! o. S9 O5 U( l  h
        accuracy may allow segment to be generated.
: t* S' F" K6 V$ E5 w  I$ n$ P
$ L# ^2 c( [9 [( j8 L" s/ B    WARNING: Segment with same start and end points at3 {, u' G* X& k- \  [
        (408380.01 -137974.98) will be ignored.  Increasing output( ]4 r! Z( r1 d8 J( U8 ]
        accuracy may allow segment to be generated.
6 p( Q% i5 s7 Q+ h3 n
7 }, g0 |* [8 F% r/ B+ [7 D    WARNING: Segment with same start and end points at% F9 k8 W, @. Q. G/ c3 h
        (408380.01 -103974.98) will be ignored.  Increasing output
' U$ J9 T# M. I4 \9 {        accuracy may allow segment to be generated.2 ]7 t; u4 r( h4 a

0 y& |5 \/ p1 _; M/ E    WARNING: Segment with same start and end points at. L0 y8 k; o! H4 ~" U
        (408380.01 -69974.98) will be ignored.  Increasing output) ~- E: u- Q  \( L3 d8 r. ~
        accuracy may allow segment to be generated.2 z! }$ L& \- o' O
4 u8 E7 @' F5 G! V6 E5 D9 g
    WARNING: Segment with same start and end points at7 }% E/ }0 d5 J$ \( v5 H. V- R: a
        (408380.01 -35974.98) will be ignored.  Increasing output
+ D8 z2 P) K- k0 w/ ~/ g        accuracy may allow segment to be generated.
" o$ p) B8 n; C: a* s9 |8 g
5 f% m" }5 V1 H    WARNING: Segment with same start and end points at4 |: |& b2 k  T8 L
        (408380.01 -1974.98) will be ignored.  Increasing output
( j- a. F: C0 O7 P7 I$ f+ k        accuracy may allow segment to be generated.
9 \8 B: k9 w( Z& z# r
8 x$ k: ~1 r( j0 t6 t    WARNING: Segment with same start and end points at* u  \4 ^5 s, u+ a6 |! I3 s% q
        (442380.01 -409974.98) will be ignored.  Increasing output
+ N! j$ Y% ^+ t+ ]; ]1 A# l        accuracy may allow segment to be generated.
0 |; B5 D! F6 C% y* v0 Q. a2 a
! `. S* g, k$ T' l    WARNING: Segment with same start and end points at
0 j% ?) O% b3 R0 {7 c4 o        (442380.01 -375974.98) will be ignored.  Increasing output
$ [8 E3 H/ F: ~: `8 T+ Q& Y        accuracy may allow segment to be generated.1 h+ w% N  r) O4 n1 a9 H9 I% q

! X; t% t6 D# q8 x" {/ v    WARNING: Segment with same start and end points at6 b# M$ q! T& p/ o
        (442380.01 -341974.98) will be ignored.  Increasing output( X1 z. A4 k+ ]" A. z8 q; y
        accuracy may allow segment to be generated.
2 [3 F' Z* G7 o6 [: v$ t2 @% L6 z) d0 H  }" S2 F  {) ]
    WARNING: Segment with same start and end points at1 g( K  I) L) S9 ^9 n  M' ^
        (442380.01 -307974.98) will be ignored.  Increasing output
  T6 h+ p7 U; S) ?        accuracy may allow segment to be generated.
6 T2 R0 u5 k! f; x
% z+ m6 n+ `' Q& M% a( w    WARNING: Segment with same start and end points at
3 g, o% V- [8 T: o( k3 A7 J        (442380.01 -273974.98) will be ignored.  Increasing output
# h8 u. u* p0 I: E- W        accuracy may allow segment to be generated.' }" c6 r0 j: m- {4 Z& O* o
! e0 r3 O: E) G5 [
    WARNING: Segment with same start and end points at
# W/ @" M. n* _, a7 [+ p" v& m        (442380.01 -239974.98) will be ignored.  Increasing output+ C3 Y3 P5 t/ S
        accuracy may allow segment to be generated.
, S- J0 K3 i6 ?. Z: L' G
6 e4 g; _! n0 l6 K; C4 D    WARNING: Segment with same start and end points at& ?0 P* ^/ [% c9 L# s( I
        (442380.01 -205974.98) will be ignored.  Increasing output; ~1 t6 J8 c! H8 j" S" K. h2 u
        accuracy may allow segment to be generated.& U3 X( R# |" r5 ]7 r9 P% h1 \: A
* o& d  u9 m# I: D8 |: ^( l# K
    WARNING: Segment with same start and end points at3 Z3 [, I9 j! [
        (442380.01 -171974.98) will be ignored.  Increasing output
" }; `7 J# \" y0 W& Z- O, b* x( F6 u( _        accuracy may allow segment to be generated.  U% x$ h9 d) P: Q. N
4 ]. ~! @4 A" N+ j* x# b& Y
    WARNING: Segment with same start and end points at
! C, [2 ]- p" F& m2 m( J7 p5 t        (442380.01 -137974.98) will be ignored.  Increasing output
' I0 c1 U' t2 X5 X        accuracy may allow segment to be generated.8 j6 l) h9 `* l
/ L: l4 j* O9 s# Q' g
    WARNING: Segment with same start and end points at
3 ^. b7 C1 _  O* j        (442380.01 -103974.98) will be ignored.  Increasing output
/ q$ y& F- B  [& ?0 x2 d: h        accuracy may allow segment to be generated.7 ?3 `0 r6 c$ n  B
0 L" o) `2 w! X5 b& c, X
    WARNING: Segment with same start and end points at
9 o/ h# ^* c0 ^% d; y5 a( y        (442380.01 -69974.98) will be ignored.  Increasing output: C" U* X+ k$ X* ]$ ^8 E
        accuracy may allow segment to be generated.
5 w; m$ @/ P! ^( i: [0 o3 P
9 @# [$ F, d* x' T! e$ C& s+ Z8 t% q, l8 w# k/ N/ s
7 H4 a  R8 C, e, `3 n& A
  APERTURES USED:
( I  [" a+ w2 b6 B+ C* E1 Z  ---------------------------------------------------------
; K/ Q3 s( n! M5 ]5 H9 M0 A  TYPE       SIZE/NAME                   ROT   MIRROR MODE
  j8 K# J4 }# L' p  t  ---------------------------------------------------------
8 n- L. A8 m$ ]3 {  CIRCLE     0.50800                                  DARK 2 S8 `( F0 ^( h& B6 s0 l: y
  CIRCLE     1.01600                                  DARK
- [6 Y/ @  K1 }0 I- o$ Z5 C1 m) N9 I3 w/ g1 C# B4 Z$ {
     L2 created with warnings
3 i* x4 ?% P$ K5 C, n: Y6 ~4 l3 J# h, J! \1 Z' u# z

/ V# Q# W( w! d) L================================================================7 t+ _9 i. j! h( V* `
     PROCESSING FILM < D2_3.art > .../ {. b7 n6 X1 h) \$ R+ S
================================================================
  f; g2 T7 J- m5 n9 V2 U/ f1 d% P% T8 d
  FILM PARAMETERS :5 b9 s3 |. l2 D* Q# @/ e: C1 w% }+ ~. v
  ---------------------------------------------------------
6 y& c* m: o5 C5 N  Undefined line width                0.00
% b- |2 E0 ]$ E9 D0 M! I  A  Mirror code                         NONE' |& d9 W* @8 [5 f) B
  Rotate angle                        NONE
9 P) y  I7 J, r" W7 b9 k% n" ?  Offset x:                           0.005 p. u8 c; P3 B- t& `
  Offset y:                           0.00
) X" p/ u; y/ y) U) o. D9 f  Plot negative                       NO
+ z+ H3 w; J0 p6 V  Suppress unconnected internal pads  NO: }" X  v1 o  U1 p

$ I$ u4 B1 o* P. Y& w
) A$ p+ x, \1 Z2 n) U. Q2 ~( a
( C0 v( o. Y4 b  APERTURES USED:
! A8 x4 ~# E: S6 l$ K0 z  ---------------------------------------------------------$ z! U; Z8 s/ ]% O4 Z  P% K* ]
  TYPE       SIZE/NAME                   ROT   MIRROR MODE
1 t0 o0 o$ y' G3 Y2 p7 c' ^  ---------------------------------------------------------
4 B& ~+ R5 \; l1 Y4 _  CIRCLE     0.25400                                  DARK 2 P9 O. y- C1 D7 a
  CIRCLE     0.50800                                  DARK
  N0 f( s- l& ~* q4 J9 B" G$ n0 l. [) _
     D2_3 created with warnings
: w% q: s, L  V2 i  W, ^. k% E& Q9 Q' Z" ^* ~% A! R0 \$ ?2 o( f1 c( v
/ Z6 H" Z/ t5 z( R  n
================================================================
1 Q: }$ \, K' ]. Y: v     PROCESSING FILM < L3.art > ...
% d; `2 L3 b" u================================================================. v8 c. a% H" G& n. w
0 m; ^" S$ T! t) U- B8 B
  FILM PARAMETERS :
9 R; W' B5 v5 c' R  ---------------------------------------------------------
, ~3 r) \. J% z+ l; T3 v8 O0 b  Undefined line width                0.002 G4 N% F$ F' G( c
  Mirror code                         NONE
8 R7 l* Q2 K5 {0 y  Rotate angle                        NONE+ q- L0 u& Z; a1 h1 L3 M) r) H
  Offset x:                           0.00
, |, Q2 z# @5 `8 M- W8 m  Offset y:                           0.00
* g' s8 W' W9 S( V  Plot negative                       NO
' S! K6 L. E; g0 U8 O  Suppress unconnected internal pads  NO
% @5 t, Y0 k: x& u5 q$ G( Y( @
! ~5 E3 S* s; `5 E. {, m
5 L) [8 C( l5 z- m( V# ~& o: D" ?: G- z4 T
  APERTURES USED:0 Q7 b# X+ }5 x4 Q3 P: `
  ---------------------------------------------------------# j0 s2 K0 v0 i# P/ q
  TYPE       SIZE/NAME                   ROT   MIRROR MODE
5 k- Q% T, k2 i' y: V- O4 t, I  ---------------------------------------------------------
5 s) X! g$ }& T  CIRCLE     0.50800                                  DARK 2 t8 N% u5 h3 Q8 X, ?  m
  CIRCLE     1.01600                                  DARK 1 j* }( H9 Q5 i' \
" Z: ~3 |- Q; x) n
     L3 created with warnings
+ k+ d" |2 t, f* ?' q
# `! Y2 ~- W& e1 a% W# D( k7 r- k" ?: y# c2 W* p8 X
================================================================
5 o- y/ o, W" J4 c# n7 t     PROCESSING FILM < SILKSCREEN_TOP.art > ...1 J3 C$ H4 c7 T& \! W5 J
================================================================* L- w' \6 f8 `$ C2 X1 a, J7 \

. ^) @8 Z: I6 j5 F  FILM PARAMETERS :
) T! U. D$ }! z% r) W2 R2 h! }  ---------------------------------------------------------8 ~& @5 l0 [$ Y, V. u9 L- `6 [
  Undefined line width                0.00
' |) g) d% m1 J3 ~% U% F- f  Mirror code                         NONE
/ t* T) s" j% K8 A  Rotate angle                        NONE
9 ^& v3 |" |; Y4 y9 e; b  Offset x:                           0.00. X( G& v1 R$ v/ a1 C2 X8 U
  Offset y:                           0.008 H5 n0 }- i( `  J+ _/ E' }
  Plot negative                       NO, V9 A  n  T$ G9 u
  Suppress unconnected internal pads  NO6 ~( I. v& O! D: a
8 S! l# b; L4 C( O' h" @4 i

5 H3 g9 Z( G6 N. |- N, y" ?3 h# q1 a
  APERTURES USED:
. a$ {" x6 O* q1 k  ---------------------------------------------------------' O( d! H* x/ E) q0 p9 _
  TYPE       SIZE/NAME                   ROT   MIRROR MODE
' `2 A) Z- K. {' W2 V  ---------------------------------------------------------
* R1 T' J7 d. \0 |  CIRCLE     0.07500                                  DARK
( q9 b9 o4 v! I; F7 a  CIRCLE     0.25000                                  DARK
+ [5 ]% b; X0 R: t, f6 G, s
. h. g8 c7 \; i5 k     SILKSCREEN_TOP created with warnings
  v/ X- _2 C5 l  q) _# Z- _: W- T7 \6 G3 W, ~

0 x4 _+ Z- b' Q. b: |8 w0 S$ M================================================================; E8 W6 L" M  O! Z9 f, B
     PROCESSING FILM < OUTLINE.art > ..." @' b& U( V$ ?& a( q& H& _3 P
================================================================" J8 v+ k5 ]1 o' y) W/ o1 F3 k

* R' I6 T) b% I% {- D7 h  FILM PARAMETERS :
- i/ P! r# K- b0 h1 @$ K  ---------------------------------------------------------  Q1 q3 Z) H! E: L' a$ K5 }
  Undefined line width                100.00
! X  K( A1 r- V1 H' e, l/ E/ K/ Z  Mirror code                         NONE
' O5 @! O) \1 \2 f  Rotate angle                        NONE8 Z) ]0 m! @! T6 Z% u
  Offset x:                           0.00! _2 V; }" H8 f) X  \5 {2 p! |  Y
  Offset y:                           0.004 O% |; P# G* x7 t4 R
  Plot negative                       NO7 u/ i( f$ k+ h7 v5 ]; L. a
  Suppress unconnected internal pads  NO" w+ W5 H3 g3 {! s8 q2 O% r3 I
& u. j- R* ?( j. Z5 R& F

8 Q2 D  I. G. A- j" v0 l- q% K" L+ K- B6 h
  APERTURES USED:
( I+ y$ R* ?& p  ---------------------------------------------------------6 T/ s0 z) o1 j3 o; u- Y9 D" K
  TYPE       SIZE/NAME                   ROT   MIRROR MODE
# {1 Y2 R" K( Z5 z  ---------------------------------------------------------. c* ]& }. q6 {4 ?7 P+ X$ f3 e1 j
  CIRCLE     0.10000                                  DARK
; z; o; |* c* i1 }* N9 @3 d) F7 v# z/ W5 M) t2 n
     OUTLINE created with warnings
5 \% Q9 ]/ O7 @( S: C# Q; G
3 I2 W( k2 O3 i+ X+ o& d- Q$ F5 R4 |' J+ u  y1 ]
------------------------------------------------------8 s+ K6 Z, S" r+ n- {
SUMMARY:1 a1 {' n/ a7 y" g+ e- l2 j
            L1 created with warnings
6 M' ^6 N0 L- p/ y7 B            D1_2 created with warnings; a5 e, e- N" E; m1 z, d0 T7 C
            L2 created with warnings
" r+ F$ i$ ]) k            D2_3 created with warnings
' G& _/ N, B" S( Z( O) ]            L3 created with warnings
4 N5 z! i$ b7 X) z  }. ]0 U! M! n            SILKSCREEN_TOP created with warnings
2 o% z6 N- ?2 M            OUTLINE created with warnings' m2 _% s% T2 T* Q( l: l* p5 ^

* a, }( |! Y2 P0 @ ARTWORK finished. t/ }8 P$ Q9 d  f8 {! q) L

下载资料威望不够？点击查看获取威望的N种方法>>
回复 支持 反对

举报

flyingc381
  • TA的每日心情
    开心
    2023-10-12 15:00

    • 签到天数: 4 天

    [LV.2]偶尔看看I
    3#
    发表于 2011-11-1 10:02 | 只看该作者
    只是warning，，问题不大
    * A! v7 m/ y+ |& N6 p0 D

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    piedgogo

    该用户从未签到
    4#
    发表于 2011-11-1 10:09 | 只看该作者
    对啊，只是warning，应该出片了才对。。。你看看assemble的配置有没有问题，有生成过钻孔？

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    412287724

    该用户从未签到
    5#
     楼主| 发表于 2011-11-1 11:15 | 只看该作者
    piedgogo 发表于 2011-11-1 10:09 5 s* j% _4 R+ V0 r, r& D: H
    对啊，只是warning，应该出片了才对。。。你看看assemble的配置有没有问题，有生成过钻孔？
    . }2 R- |; R% S3 \6 e
    我没出那个assembly层的，因为有错误就没出，不好意思那个错误表发错了，下面这个是，麻烦您给看看，着急啊！0 n3 |; `' o+ M# ~* Y( G
                                                           )8 p5 M3 Y/ ^0 b  ^. m6 E. A: v1 O9 f
    (        ARTWORK LOG                                         )( U; Q! U) I* U" T, I5 d2 |& u: k6 ^5 q
    (                                                            )
    : V& i6 m& U7 r(        Drawing          : tju_10_32_2011.mcm               )& A: j! q3 a5 [7 j
    (        Software Version : 15.51p003                        )
    / ~: R# Q! e: ~- a1 o(        Date/Time        : Tue Nov 01 11:14:07 2011         )- ^3 K  ~" l+ W, M# E0 ], \
    (                                                            )7 s6 V: X; C. T' J# t
    (------------------------------------------------------------)
    3 p2 h9 c4 B* ^1 f( L0 Z9 m0 C# Y( f5 D( b
    + V9 ?( J1 P$ w6 k: D
    ---- Photoplot outline rectangle not found ... using drawing extents
    . W( e  R9 B0 ]/ L* H& j" T! Q4 L1 X4 O% `. x/ w

    0 k1 ^8 K- m* x/ r1 ~Tue Nov 01 11:14:07 2011                                Page     1
    ' ?/ I% B& B6 S0 `' k/ @1 P
      Z# S5 c: _" o* r) A, b5 MPhotoplot log file
    3 @5 _1 H- K  X3 w& N1 tResults from parameter file ...
    $ A* a: ?) m8 K6 d
    , e6 g1 \5 ^' ~, xDEVICE-TYPE           GERBER_RS274X
    ; Y% y7 x/ _0 U; TOUTPUT-UNITS          MM! U- {& R* F7 U& a! x2 K
    FILM-SIZE             2400000 1600000; c. m; ^# L+ N8 s6 E5 ^2 j% H
    FORMAT                5.5* E6 m; J' h. L: `$ w
    ABORT-ON-ERROR        NO& \, ~' w& Q& J+ N" q' ?% D
    SCALE                 1
    , t8 Z! O( w. B# ?8 f- I6 USUPPRESS-LEAD-ZEROES  YES4 u) X1 r- e0 @7 Q
    SUPPRESS-TRAIL-ZEROES NO
    6 P$ U; h. s0 l- Q4 w6 E! FSUPPRESS-EQUAL        YES
    ; A: M- E( x/ t5 [7 t' aUNDEF-APT-CONT        NO
    ! m9 z5 a1 \( J7 W- c% A/ a/ _  l# I+ e% j6 z. h; G5 V- p) f
    : D4 `" K, ^1 x4 v. n0 c% f0 j
    ================================================================& B, `+ H' ]  L' X9 }! v
         PROCESSING FILM < Assembly.art > ...
    ( x% [% O* @4 a5 ?+ H================================================================
    2 r$ p4 p( i4 h0 v; y7 W& m# C+ v8 N# g
      FILM PARAMETERS :
    + ?4 ]: j$ V1 J% P  i  ---------------------------------------------------------
    - G  }4 U4 ~6 {3 d/ Z* m3 o  Undefined line width                10.00
    9 j4 j9 }4 R% G5 o  Mirror code                         NONE
    - S; x* C) L6 z3 N4 y  Z( \8 m  Rotate angle                        NONE" J4 x# x9 O6 ~- Z2 G& @
      Offset x:                           0.002 U. e: B: T  l, m, Z
      Offset y:                           0.00
    # E5 r& X( @7 ?! z9 T  Plot negative                       NO
    ' B4 y3 [* ~6 |7 ^  Suppress unconnected internal pads  NO
    , j! L" x, w$ |5 f* j5 @' O" E* @, S' Z0 k2 D
        WARNING: Film contains DRC error(s).9 o8 o/ {' t/ y) A( D$ O: x; U
        WARNING: more than one pin class in film record
    & r0 _; `$ t; r; ^    WARNING: more than one via class in film record
    ( P- b/ w- W4 v, ^    WARNING: more than one etch class in film record
    4 X  B  ~' P* {" `    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (-58435.32 -81145.29)., T; ~; Q' X1 A
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (-58435.32 -78031.29).# I( P/ d4 [+ P9 y# j# d
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (-58435.32 -80107.29).
    " J' \- c& l7 w! J$ @& U' c! {    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (-58435.32 -79069.29).0 L9 p. q3 o: a2 d. S
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (-58462.38 -76935.51).2 p# P# v, t' i! N
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (46233.94 -21963.58).
    5 i# N  Z* H* Z$ U( j2 G. B    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (46233.94 -20925.58).  \2 V9 G9 I: C! B+ C1 g
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (47271.94 -23001.58).$ o% M6 G0 r0 _) {  N" j# F
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (47271.94 -21963.58).
    ( D3 P* ~7 b6 x5 b+ k8 M  x8 I    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (47271.94 -20925.58)./ t5 X1 X) `) b; O1 [& m7 _2 s
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (47255.57 -18779.28).
    + @: }2 Z% J% b: S, H; Y    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (46220.41 -18778.28).1 n. l7 R6 G0 w# P' R( v
        WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (46233.94 -19887.58).
    ; B( e; q: G" E: T    WARNING: Null REGULAR-PAD specified for padstack 13V1016_508_S0M4 at (47269.10 -19888.58).
    " N& l& [, M0 O3 k/ p, h2 ^    WARNING: 0 width line found at (-18000.00 -33000.00). @- w+ K. r3 z' `3 H! b6 T
        WARNING: ... using undefined line width of 10.00
    9 |  o& F; R$ Z) p" A% Q, ~4 z. Y% M0 s6 m  p) c% @3 ^
        WARNING: Multiple 0 width lines; all will be treated the same as the first.9 _( C- G7 P6 w$ |) t; V9 b, T1 \
        WARNING: ... using undefined line width of 10.00
    ' r2 n% Z( n+ V% [1 F
    7 c4 x6 F8 O. ^0 E) H( N$ \    WARNING: Shape at (-15900.00 -15900.00) contains void at (-1000.00 901.00)
    8 W8 _' b( v0 H! f5 N. x* R. U        which touches another shape. w& f' B% B  w2 ~7 E$ C- C$ T

    ! O0 \% B4 v2 l5 L    ERROR: aborting film - artwork will not be generated!
    : X! Y$ g4 @0 G# n* o8 g Error in Assembly--halting output.  Artwork file not generated.
    / ~8 w0 `- K  T2 ^2 N% V *** ERROR with Assembly
    # @6 e% S9 v) N  Z  u- p- Q麻烦看看这是哪的问题，我只要把那层的GND删除，就能出ASSEMBLY层，谢谢您的及时回复！感激不尽。

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    wangjing

    该用户从未签到
    7#
    发表于 2011-11-1 14:23 | 只看该作者
    412287724 发表于 2011-11-1 11:15 . z9 @7 ^- N5 K6 o( z
    我没出那个assembly层的，因为有错误就没出，不好意思那个错误表发错了，下面这个是，麻烦您给看看，着急 ...
    , G6 T% X8 W( f  v) k0 N
    要不就是（-1000,901）这点，都试试

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    piedgogo

    该用户从未签到
    8#
    发表于 2011-11-1 14:46 | 只看该作者
    你的film里面加的层有相互矛盾的，看你的assemble的设置。重新添加一遍自己需要的class。

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    412287724

    该用户从未签到
    9#
     楼主| 发表于 2011-11-1 15:15 | 只看该作者
    piedgogo 发表于 2011-11-1 14:46 2 x7 g, O! B5 X* i, v; O3 l& P
    你的film里面加的层有相互矛盾的，看你的assemble的设置。重新添加一遍自己需要的class。

    - {. w! q3 y3 Q5 V4 C1 O& }+ c5 V谢谢大家的帮助，我按照楼上的一位说的试着做了，没有奇怪的shape,还有一位说我得film里面有文件是互相矛盾，我添付的层叠结构，请帮我在看看，谢谢大家的回复，十分感谢！

    1.pdf

    101.28 KB, 下载次数: 33, 下载积分: 威望 -5

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    piedgogo

    该用户从未签到
    10#
    发表于 2011-11-1 16:43 | 只看该作者
    看了觉得好神奇。。。你这是要做什么？

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    piedgogo

    该用户从未签到
    11#
    发表于 2011-11-1 16:48 | 只看该作者
    你的assemble是给组装车间用的对不对？
    ( P" g) Q% Q+ U9 k3 C! j- ^/ _那你需要给他们Placement文件和下面这样一份Gerber就好。Placement文件详细告诉他们每个元件坐标，下面这份Gerber里面有每个位置元件的标号。这样就够了。

    silk_top.jpg (53.05 KB, 下载次数: 17)

    silk_top.jpg

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    wangke851010

    该用户从未签到
    12#
    发表于 2011-11-1 16:52 | 只看该作者
    兄弟，要不发下brd文件出来（如果不怕泄密的话），你精度单位，你中途可能又设置过单位的精确度了，还有层设置都有问题，个人看法，勿生气，我试着看下能不能导出gerber。8 p7 b0 C7 E% p: ?2 D

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    piedgogo

    该用户从未签到
    13#
    发表于 2011-11-1 16:55 | 只看该作者
    这两个不是当初做的silk层，是前两天重新给外包组装厂做的两张片子，再用CAM打印成PDF

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    kbhf518

    该用户从未签到
    14#
    发表于 2011-11-1 17:10 | 只看该作者
    好像有刷屏的意思啊！呵呵。

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    wangjing

    该用户从未签到
    15#
    发表于 2011-11-2 09:04 | 只看该作者
    412287724 发表于 2011-11-1 15:15 ' L( R+ ~3 M* i% J$ B" I
    谢谢大家的帮助，我按照楼上的一位说的试着做了，没有奇怪的shape,还有一位说我得film里面有文件是互相矛 ...

    0 p0 N# e9 P4 V  j0 h! y6 A6 I4 R你这太吓人了，没有这么麻烦的，via和pin都可以去掉的，只剩标号和器件的外形框就可以了。还要出一份坐标文件，通过file/export placement。

    下载资料威望不够？点击查看获取威望的N种方法>>
    回复 支持 反对

    举报

    下一页 »
    12下一页
    返回列表 发新帖
    高级模式
    B Color Image Link Quote Code Smilies
    您需要登录后才可以回帖 登录 | 注册

    本版积分规则

    关闭

    推荐内容上一条 /1 下一条

    EDA365公众号

    关于我们|手机版|EDA365电子论坛网 ( 粤ICP备18020198号-1 )

    GMT+8, 2025-11-28 18:17 , Processed in 0.187500 second(s), 29 queries , Gzip On.

    深圳市墨知创新科技有限公司

    地址:深圳市南山区科技生态园2栋A座805 电话:19926409050

    快速回复 返回顶部 返回列表